Tecra A8 - HARD drive Protection service does not work under Vista

Similar Questions

• Tecra A9: HARD drive write Cache does not work

  Hello!

  When I try to activate your hard drive write cache, it does not work:
  I can check the box and press OK, but when I go back to the dialog box the box is unchecked.
  The event log shows a warning: "the driver disabled the write on the device \Device\Harddisk0\DR0 cache.

  This slows down my laptop. I don't want to work without the write cache.
  What can I do?

  Greetings,
  Christian

  Hello

  did restart you your machine after checking the box? Usually, you must first reboot the system when certain changes.
  On the other side, you know this microsoft article? You should read:

  http://support.Microsoft.com/kb/332023

  This could probably explain why windows leaves the box unchecked...

  Welcome them

• Driver Realtek 8103e does not work under Vista (DV4T), ethernet does not work

  I got a new motherboard under the vices, but now the ethernet does not (rj45).  I tried several drivers of other work say but it isn't on mine.

  Included are version 8/20, 9/21 and 1/24 (dates or latest codes) everything has been loaded at the front desk.

  I have the icon and when the cable is unplugged shows red X, which disappears when reconnected.

  Anyone have an idea when else I can do?

  I can't understand how a company like HP sends a non-working back unit after repair.

  If you had any driver installed for Ethernet before installing what I gave you...

  Then uninstall them all and also this driver which I gave you.

  Restart the system and reinstall this driver from me.

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• Keyboard does not work under Vista on Satellite L300D

  Dear readers,

  I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

  Today, I started the book and noticed that I was not able to type my password for Windows.
  I thought, there must be a problem with the keyboard and restarted the laptop.
  I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

  I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
  Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
  So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

  So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

  But it's still there.

  Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

  I would be very happy for any advice or help

  Greetings from Berlin

  Thomas

  PS: I want to say sorry for my bad English... :-)

  Hey mate

  > It's about 5 months and until now I didn't have problems.

  I wonder why this keyboard problem happened after 5 months of use?  :|
  This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

  In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

  I think that your warranty is valid and therefore everything must be covered by the warranty!

  Good luck

• Windows Update does not work under Vista

  Hello! I have Vista Ultimate 64 bit and a few weeks ago, I noticed that my windows updates had stopped working. I followed the instructions to do a repair of my drive, but got "the upgrade is not available. Press Cancel and then select upgrade to a newer version than what you have "." However, there is nothing that gives me this opportunity. How am I supposed to fix it then?

  I have a feeling that this happened after a service pack has been installed (3?), but as I put it to the automatic updates I have not noticed exactly when he had ceased. I'm frustrated and very frankly also irritated. I paid a fair bit for Vista Ultimate and I'm basically says my drive is useless. I ran the Microsoft Fix It, and he said he solved the problem, but it didn't. I also did a system restore and that do not also not fixed the problem. The error code I get whenever I have try to do an update is 80070490. I saw a lot of messages from people having this same problem, while searching for a solution, so there's obviously a problem somewhere I would appreciate to help get it sorted please.
  Thank you and best regards,
  Sharon

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

• CD/DVD does not work under Vista

  I have a laptop Compaq Presario F700 under Windows Vista Home Premium.  For the first year and a half i have owned my laptop, my CD/DVD drive worked perfectly.  A month ago it has stopped working completely.  It does not appear in my computer or Device Manager and it does not open.  I don't think that the drive is defective because it will open when the first Compaq screen shows up, but when the Microsoft Corporation loading screen is up, it stops working.  I used Google to good use, but none of the solutions I found worked.  I tried to delete upper and lower filters but they aren't there, and I tried all the solutions Microsoft Fix - It nothing works.

  Any help is greatly appreciated

  Hello

  Reader might indeed have gone wrong.

  Check with support from Compaq and their forums for known problems.

  Compaq - Support
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Fourms
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A200-1AX: many applications does not work under Vista

  Greetings,

  I bought A200 1AX a few days ago and I'm not having a good experience with regard to the installation of applications on this Vista box. Even install yahoo messenger did not work and produces the NSIS error. 3D max 9 installation does not work (even though some have managed to operate); Install Adobe CS3 (supposed to be for Vista) did not entirely - the photopshop component have not installed, etc.

  The bottom line, I plan to move to XP OS. Means the required BIOS update I have my Vista recovery CD will NOT work after the switch to XP?

  Thank you for your feedback.

  Best regards, Ashraf.

  Unfortunately I put t know how to help you.
  Usually, if the 3rd party applications are designed and support the Vista while there should be no problem with unique program facilities.

  Check if all software packages are completely cared for and compatible with Vista.

  > The necessary BIOS update means that I have my Vista recovery CD will NOT work after the switch to XP?

  No, after the update the BIOS of XP, you will still be able to use the Vista CD from recovery, but perhaps some functions such as the FN keys will not work.

• Touchpad does not work under Vista - Satellite A110

  I installed Win Vista business on Satellite A110...
  I downloaded the alps touchpad drivers: the drivers are installed, but it does not work!
  Is this a known issue? I did something wrong?
  Thank you

  Downloaded the correct drivers for your computer? Sometimes the machines appear to be similar, but then they have different hardware...

  Your touchpad has a function before?

  Welcome them

• my 1 TB get failure HARD drive now its does not work, I had used Bitlocker on a driver... everyone can view the data of the disk without password?

  my hard drive does not, makes the noise, and I don't see in my computer...

  a disk is locked using bitlocker... I go to repair hard disk...
  but I'm afraid that my data in the bitlocker drive safe? No one can access without password?
  and what happens if the hdd is irreparable? I will come back my data?

  its working fine now I have clean the power cable from the HARD drive... now my drive HARD works very well... I thank all for answer now, I know the work of the bit locker

• I get error no hard drive detected, so I put in a new hard drive. It does not work. What can I do?

  Windows XP Home Edition on a HP Pavilion zv5405us notebook PC

  Without a cd operation, he begins by saying-

  Intel UNDI, PXE - 2.0 (build 082)

  Copyright...

  For Realtek RTL8139 (X) /8130/ 810 X PCI Fast ethernet controller v2.13 (020326)

  PXE - E61: Media test page, check the cable

  PXE - MOF: Exit PXE ROM.

  And when I boot from the CD of the operating system it is to the point where I choose to install or repair.

  So, if I click on one of those who he says...

  Setup did not find hard drives installed on your computer.

  Setup cannot continue.

  I tried replacing the hard drive, but it was always the same thing, so I put the old one back in.

  I need to find a way to fix it.

  Can anyone help?

  Assuming that your laptop was manufactured after 2003, you can try the HP drive diagnostic tool, but it seems that if you have a more serious hardware problem: cable/connector from the hard drive is faulty or the on the motherboard disk controller has failed.

  You can see also solve the Start Up and No Boot problems checklist but that probably tells you nothing that you have not already tried.

  See also Overview of how the problems when a computer is not Boot or Start Up properly

• PNY attached 8 GB USB 2.0 Flash Drive recognized but does not work under the Windows 7 operating system

  I have an attached PNY 8 GB USB 2.0 Flash Drive that works perfectly on Windows XP. But when I try to use it on a Windows 7 operating system, it is very few recognized by Windows 7. I mean at least, is that when I look for the device by exploring 'Computer' in the menu start the device does not appear at ALL. However, when I go to control panel-> hardware and sound-> devices and printers, it shows a device called "DISK 2.0" which I believe are 'minimum' recognition of this 8GB flash drive, I was talking about. Can someone help me get the recognition for this camera on Windows 7? Thank you.

  Edit: I noticed in Device Manager-> USB MASS STORAGE DEVICE-> Propteries the following for my optical mouse Microsoft and the PNY 8 GB flash drive

  The Microsoft Optical mouse is the location: Port_ #0001.Hub_ #0004

  On the MagicJack (USB Composite device) is the location: Port_ #0002.Hub_ #0007

  On the flash drive is the location: 0000.001d.0002.002.000.000.000.000.000

  3rd place property looks pretty weird (Im assuming that third location data for the flash player, since the only other USB devices are my Microsft mouse and the MagicJack I know is a composite device, but I'm wrong.  AMD Athlon 64 3200 + 1GIG memory ATI Radeon X800XL 250gig W.D. hard drive

  An automatic Microsoft Windows update fixed my problem with this specific long ago PNY USB flash drive. It has been set at least the last 6 months or more.

• My admin password does not work under Vista

  my administrator password won't work now, what do I do now because some programs require me typing my password and it won't take it. Please help, thank you, randy

  * original title - I have a windows vista, *.

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• CD/DVD ROM shows disabled and does not work under Vista

  My CD or DVD drive is not reading or writing and is indicated as being disabled, how can I enable them again?

  * original title - my CD or DVD drive does not read or write and is shown as being disabled, how can I enable them again? *

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Screen saver does not work under Vista.

  I am running Vista Home Premium, but I was never able to get the screensaver running. Done everything I should, but it just never worked.

  Is there a solution?

  Here is the article from the MS Support about wireless pointing devices and screen saver...

  The screen saver does not start after the installation of a wireless pointing device

   http://support.Microsoft.com/kb/913405

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.