Tecra A8 - Touchpad problem

Similar Questions

• Satellite P300-1 year - Touchpad problem with AC adapter / CC

  I have a laptop Satellite P300-1 year and from the beginning (two weeks)
  I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

  It's VERY annoying. A USB mouse works perfectly.
  I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

  Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
  With the battery, the touchpad is perfect.

  I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
  Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  Anyone had this same problem?

  > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  The point is that your laptop should be always verified using the Toshiba factory setting.
  Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

  In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

  I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
  If yes you can contact ASP and could provide all the necessary details for only one technician.

  Good bye

• Tecra A11 - 17G - buttons on touchpad problem

  Hello

  I had already put the touchpad and its 2 buttons to act conservatively on Windows XP. (click without typing or other extended functions)

  Suddenly he was mentally ill and I can't reconfigure the device. The mouse behaves strangely only clicking and scrolling is done unintentionally...

  What can I please?

  Thank you!
  Kind regards.

  What you can do?

  Try to remove the touchpad driver (Control Panel > programs and features), restart your computer, and reinstall the driver from the touchpad.
  You can find it on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Tecra A11 Touchpad Windows 10 questions

  After upgrading my Tecra A11-182 (PTSE0E-0LP046GR) for Windows 10, I have problems with the touchpad. The cursor jumps from time to time in other places on the desktop, as in Word 2010. Y at - it a new version of the driver for this device? The Windows Device Manager indicates that the most recent driver is installed. Thank you for your suggestions

  Achim

  The cursor jumps because your palm makes contact with the touchpad while you type.

  The advanced settings of Touchpad has an option called "Disable tapping" or «Disable the Touchpad when typing»
  If you do not have these settings, you must update the driver for the Touchpad (Synaptics or Alps) that is compatible with Windows 10.

• Tecra A2 - mouse problems

  I have some problems with the external mouse on my tecra A2. The pointer seem to 'jump', sometimes across the screen, and it's pretty boring. I'm not sure of what the cause of the problem and still less what to do about it... The mouse is a Logitech optical mouse. I tried to change to a similar mouse but that did not help...
  What should I do?

  Hello

  Try disabling the touchpad through FN + F9. Did you try it with mouse just wireless? You can try it with the mouse that is connected with a cable?

  Sometimes I have the same problem, but it happens if the batteries are empty or if the mouse signal receiver is placed on the wrong place.

• Tecra M2, Touchpad / dual pointing devices does not...

  Hello
  I'm having a problem with my pointing devices. Both touchpad and battery Point ceases work sometimes for no apparent reason, then him come on again once. I tried to reisntall drivers but not help. I have to use the USB mouse now to for use. Everything seems fine and the system gives no error or so. Says the device works very well. Have used the wizard by default as well, but he just does'nt work. No errors etc...
  Please help me to solve the problem...
  Also another question, is Tecra M2 visa compatible. I have 1.5 G of RAM and 2.0 Ghz processor
  concerning

  Hello

  I noticed a few intermissions of touchpad on my laptop while the CPU runs at 100% with a maximum return.
  Maybe this could be a reason for interruptions of unique touchpad.

  In other cases, the touchpad hardware malfunction perhaps. One of my friends noticed a very strange behavior of touchpad on his notebook.
  The touchpad has run out of control and the courier jumped from one side to the other.

  In this case the equipment must be checked and replaced if necessary.

• Tecra S10 - Touchpad driver cannot be installed

  I have a Tecra S-10.
  My touchpad scroll does not work, and I tried to reinstall driver.
  So I downloaded the driver for Win XP to Toshiba site, but when I installed it, a window showed this message (in the message of Spanish origin you):

  * Windows cannot install this hardware *.
  * There is a hardware installation problem: mines anti-personnel Pointing-device *.
  * Error during device installation
  * Fatal error during installation *.

  What can I do?
  Thank you very much

  Hello

  First install common Modules!
  Then, you need to install Touch Pad Driver, and then dual pointing device

  But the common Modules should and must be installed as the first application.

  See you soon

• Satellite U400 - 150 (PSU45E) - ALPS touchpad problem

  Hello

  I am trying to solve some problems with the touchpad. My PSU45E Toshiba U400-150 was fitted in ALPS touchpad (synaptics, which is much better from day instead).

  Previously I worked on another laptop to factory with Synaptics and software that he had advanced options, better than the ALPS.

  1. when I use ALPS driver that the coursor movement seems to be "nervous", do not help the traffic regulations. So I uninstalled the driver ALPS, Synaptisc and the movement has been widely. However, the Synaptics software had any advanced options (such as the areas of contact, scroll, etc.). So I restored the ALPS driver, once again, and returned "jumpy" movement. I assume that the driver is not as good as synaptics.

  2 I need in fact for the middle button emulation. In synaptisc, there was this option in the "contact areas". I was using the upper right corner for the emulation of the middle button of the mouse. I was looking for such an option in the ALPS driver, but there is none.

  I woud be gratefull for any sollutions, suggestions about the issue 1 and 2. Is it possible to emulate the middle button of the mouse in the ALPS?

  TIA.

  I have a touchpad Alps on my Tecra and its very good, so maybe you just need to update the driver Alps?

  Using XP or Vista?

• Split x 2, touchpad problem

  The Split X 2 HP with processor i5 and WIndows 8.1

  I bought a x 2 split this last November and I had a problem of re-occurred since I got it. During use, the mouse will often freeze and my touchpad does not work. Can you please tell me how to fix this? I am a student engineer and I need my computer works fine for my work. Thank you

  Hello

  I recently used a Split 13D x 2 that has the same problem and the next seems to correct the problem.

  Open windows control panel and open the Device Manager.  Expand "Controllers of Bus USB" and you should find 2 entries for "Generic USB Hub".  Right-click on that 1 and select Properties, then select the tab power management and Remove the tick in the box "allow the computer to turn off this device to save power".  Click Ok to save the setting.

  Do the same for the 2nd "USB hub generic.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• Tecra S11 touchpad hardware replacement

  Hello

  How can I know * what is the number of exact part of my touchpad on my Tecra S11 *-11 H? PTSE3E-XXXXXXX

  It is a little slow, he is sometimes slow to react. I've already implemented in the extended in the mouse settings option.

  where can I buy a new one?

  In my opinion if you want to get any compatible part for all Toshiba laptops, you should contact Toshiba service provider authorized in your country.

  ASP is able to supply all the parts of the laptop. Even if the part is not available, they are able to order the essential part of the Toshiba s doll.

• Pavilion: synaptics touchpad problems.

  I currently have problems touchpad and mouse.

  I used my wireless mouse once and my trachpad has stopped working compltetely.

  I have seen that it is a common problem but Ive tried everything and nothing works. a hard reset worked once to get my mouse works again without the wireless mouse but when I need to click top of cushion does nothing.

  I tried another hard reset, but the mouse pad still does not work. the mouse only appears when I plug the wireless mouse.

  When I go in the settings is not synaptics, so I downloaded synaptics for my laptop and he said 'impossible to find specific program BONES.' so I uninstalled the old version, downloaded the version for my computer laptop but still said the same thing, even if it was the version for my laptop.

  Any idea?

  @evanb1997

  Install this first.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  RESET.

  Then install this.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72875.exe

  RESET

  REO

• Satellite Z30 - A - 1 d 0: No. Wlan after fashion 'sleep' / touchpad problem

  Hello!

  I bought this laptop in early September and I am super happy with it, but there are two little things that annoy me and I was not able to fix yet:

  (1) exit standby or sleep mode, it is re - connect never automatically for the wireless on it's, I have to do it manually every time. Windows wireless works well, so this isn't it, but what is?

  (2) sometimes the touchpad will stop working randomly and I have to use a mouse or restart to fix it. I reinstalled the drivers for the touchpad. Turning the touchpad/disable using function keys does not resolve the problem.

  Any help would be appreciated!

  Yes, the Intel® Dual Band Wireless-AC 3160 pilot was published on the Intel page, and looks like this driver is more recent than the one provided in the Toshiba page.

  Here you can get the latest version of the driver:
  https://Downloadcenter.Intel.com/SearchResult.aspx?ProdId=3776

• Tecra R950 - touchpad suddenly stopped working

  Suddenly, my Tecra R950-F0036 touch pad not working (Serial No.4D027959H purchased in South Africa).

  I tried all the usual options like update the driver.
  The driver seems to be there, but FN F9 does nothing to turn on the pad.

  Any ideas on how re - activate the touchpad?

  I don't know what OS you use, but check it please state of the material. Check please the Device Manager and check touchpad is listed there and active properly.

• Satellite L505-13W - FN keys were not and touchpad problem

  Hello everyone,

  I have two questions and I'd highly appreciate your help.

  First, when I got the laptop he used to have a Fn bar that comes down from the top of the screen when I press the Fn, it shows all the keys Fn, now it disappeared. I need to get it back, I almost tried everything and nothing is there yet.

  Second, the touchpad is a zoom no more when I apply the 2 fingers in and out, he used to do that before.

  My laptop is Satellite L505-13W

  Thanks in advance

  Hi abdouni,.

  1. I think that the problem is related to Toshiba Value added Package, and Flash Cards Support utility. These two tools control FN keys and cards Flash appears if you press the FN key.
  You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Regarding the installation: first remove these two tools and reboot the laptop. Now, install the package of added value and stop and start again. Install the Flash Cards Support utility and do a restart. Now, the FN keys should work again.

  2. it could be related to value added package too to check my ad.
  If it s does not work, reinstall the driver for the touchpad.

• Satellite T110-107: touchpad problem - pointer move sometimes

  Good afternoon everyone,

  Currently I have a series of Satellite T110-107 and have problems with the touchpad.

  I start the computer and the touchpad works very well for a few seconds, after that, the touch pad stops working to full capacity.
  If I wander my fingers on the touchpad and the pointer does not move, sometimes it will move up and down, but not as it should.

  It is a common problem, or is it a hardware problem... or is it the fact that I'm just not accustomed to having the correct settings on windows7?

  All help reveal be great, because it's very frustrating!

  Kind regards!

  Hello

  I found a few tips and tricks that you should try.

  First, you must change the sensitive touchpad settings to lower the level.
  Go to control panel-> mouse and all the settings for the touchpad to the value has a less sensitive level.

  You should also right click Synaptics Pointing Device (in the taskbar) and get in the middle of the page Double click speed on.
  Move the slider to half way down the beach. This should help you too.

  Last but not leas, you will need to disable zoom pinch.
  Go to the icon in the lower right corner Synaptics pointing device, click on 'The pointing device properties', click on the "Device settings" tab, then the settings button. Uncheck "Enable Pinch Zoom" under "Pinch Zoom".

  Greetings