Tecra A9 51 G drive upgrade.

Similar Questions

• Tecra A3-S611 - hard drive upgrade

  I'm new to this forum and publishing in general.
  We have a Tecra A3-S611 who needs a new hard drive. I do not know how to order a. Anyone would be able to tell me what are the options we have? Can order us a SATA hard drive? Speed? Any size requirement? 2.5 ", Yes? Good suppliers? Brands? Please forgive my ignorance.

  Thanks in advance for any help.

  After looking on Google for this model number, it seems that this model uses a ParallelATA (IDE 2.5 "hard disk), you cannot install a SATA drive because the connector is different

  Given the A3 only came out with 40 GB (or there abouts) HDD, the maximum size may be limited to 120 GB due to the LBA48 barrier of 137 GB (limitation of the Chipset).

  So what you want is a 100 GB or 120 GB IDE PATA 2.5 "HDD, clocked at 4200 RPM or 5400 RPM / min. 7200 TPM can become too hot.

• Tecra S1 - size HARD drive can I use

  Hello

  I have a Tecra S1 and looking to upgrade the hard drive because it is only the 30 GB model.
  I found the HDD compatible in terms of size, but my question was if there was a restriction on the ability of the HARD drive, or I can go to any size I want?

  Any help would be appreciated

  Thanks Chris

  Hello

  AFAIK the Tecra is supported by the IDE HDD controller and you have the 2.5 IDE HARD drive.
  I guess that the IDE controller supports ATA-100 standard and therefore the LBA48bit would be too pressed and this means that you can use hard disks of more than 120 GB.

  But if the ATA-5 controller / LBA28bit ATA/66 only then would be sustained and in this case, you can only use the 120 GB HARD drive as a larger size.

  Big names

• iMac 21.5 "retina - HARD drive upgrade and / or install the Fusion drive?

  Hi all

  I recently bought a retina-iMac 21.5 "(fin 2015 obvs), without realizing it when I did so that it came with a slow hard disk 5400 RPM that will larn me - do your research the next time Cameron!" In any case, I'm trying to sell it, but my search for a buyer continues, I also try to establish - without much success until now - if a hard drive upgrade and/or installation of a fusion player any is possible. I am aware that the RAM in this model is not extensible.

  Any entry received with gratitude

  Although it is possible it is a company very difficult and will void any warranty future and Apple. Have you thought from the external drive Thunderbolt?

• Satellite A50-111 - HARD drive upgrade

  Hello!

  I need to upgrade hard drive of my laptop because it is very slow. However, I know it's a 60 GB to factory-installed 4200 RPM.
  I'm ready to be upgraded to a fast 7200 RPM, if possible, with a decent capacity, but I'm not sure of the supported hard drive type (IDE?, 2.5?) is a model of 5 years. In my view, there are incompatibilities with the laptops today, hard drive formats, so I really need help.
  Thank you very much for your help!

  These are the specs on the site
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 97598

  Hey Buddy,

  In my opinion the HARD drive upgrade will not increase performance well then you should try the other options first as reinstalling Windows, or upgrade the RAM.

  Anyway, Satellite A50 use IDE interface, so you can use hard disks of 120 GB of disk space.
  Of course, you can take a model at 7200 RPM, but they need more energy and produce more noise.
  I recommend a 120 GB 5400 RPM model. That s pretty fast!

• Satellite A40-151 Possible HARD drive upgrade

  Hello

  are there restrictions on the type of hard drive that you can on this model?

  RPM
  buffer
  Number of PINS
  Type of the ATA

  I was watching a Seagate Momentus 5400.3 ST980815A, if this helps answer the question.

  Concerning

  Lee

  Hello

  I found the info your device comes with 40 GB IDE (ATA - 5) HARD drive. I think in your case, to capacity. High-capacity hard drives are not recognized properly, but I think that with 60 or 80 GB HDD should perhaps be recognized correctly.

  If anyone on this forum can give you accurate information, I recommend you contact your local dealer or service in your country. They are experts upgrade material and they have accurate info on HARD drive upgrade.

  Good luck!

• HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache

  Thank you

  The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.

  Data sheet

  6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:

  Manual

  Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Vostro 420 maximum size of hard drive upgrade?

  What is the maximum size of hard drive upgrade that works with the Vostro 420?

  FYI: I am considering adding a Western Digital Caviar Black WD2002FAEX 2 to 7200 tr / MIN 64 MB Cache SATA 6.0 GB/s 3.5 "internal hard drive
  (The 6.0 GB/s should adjust downwards to the Vostro 420 3.0 Gb/s, it's the limitations of maximum size, I need.)

  Thank you

  i456Kle9p

  2 TB SATA hard drive, works perfectly in a vostro 420.

  Bev.

• Tecra Z40 - HARD drive upgrade

  Hello

  I bought the Z40 with a 500 GB HARD drive. As a replacement, I bought the next SSD:

  Crucial CT512MX100SSD1 - 500 GB

  Unfortunately I don't have to work. On the BIOS, I see that the system recognizes the ssd. But the boots of system restore, or windows 8.1 detail installs. Are there any known compatibility issues?

  Problems persist if the bios setting is UEFI oder CSM.

  I have upgraded to the latest version of the bios to 3.7, but that did not change the result.

  If the BIOS recognizes the new SSD drive, the drive must be visible to the system.
  May I ask how did you try to install the OS Windows 8.1?
  Have what media you used?

  The Z40 Tecra can't internal ODD (optical disc). This is why I m wondering about the installation procedure

• Tecra M10 - HARD drive upgrade

  One sees no problem, replace the 160 GB HARD drive for a disk of 1 to I have already partitioned/formatted and installed XP PRO on the 1 TB HDD in my M-105 satellite and it works very well in there but he would prefer in the fastest latest TECRA laptop.

  Thank you

  Hello

  I think that this should not be a big problem since the SATA controller must handle the 1 TB HARD drive.

  You can test using the disk HARD of the M105 replacement is not difficult and the two units M105 and M10 supports the same SATA HDD.

• Tecra 8100: This HARD drive is supported for the upgrade?

  I want to improve the HD in a laptop Tecra 8100. However I can't find the HD player required to do this.

  Someone suggest where I can look?

  Hey Buddy, your notebook computer is an oldie.
  As far as I remember that the computer is about 6 years old.
  At that time, the supported laptop, 6GB, 8GB, 12GB, 15 GB, 18 GB, 20 GB HARD drive, and the disk 20 GB HARD is, in my view, a maximum size. More is not possible.

  I found kits of HARD drive you could use:
  PA3012U - 1 H 06 6 GB hard drive Kit II
  PA3027U - 1 H 12 12 GB hard drive Kit II
  PA3029U - 1:18 18 GB hard drive Kit II

• Tecra 9100: After the CD/DVD drive upgrade IDE #1 error apears

  Hello!

  I'm a happy user of Toshiba laptops, and I like my Tecra is even older. My setup is a PIVm 2.0 Ghz and a few days, I changed the HARD drive. This isn't THE PROBLEM.

  Now, I have a 80 GB Seagate HDD and works very well. Days ago, I bought a DVD - RW, H - L space (Hitachi-LG) GWA-4082N, origin of another towing specifications.

  When I boot the IDE #1 ERROR message is displayed. In windows works fine, recognized as the secondary Slave PIO mode only. I am integrating then, I searcehd the web and found solutions.

  I've read on C - SALT and reversed the master/slave issue. I downloaded a firmware for Toshiba, same version for my DVD but nothing. In my opinion, is for Toshiba, but not for this model. So I tried the solution of jumper pins 45 & 47. 47 pins Cable sync/select and 45 is identical to 48 GND.

  The solution is good half. I started the laptop and does not work, no more ERROR IDE. In windows is now secondary master UDMA Mode. Works very well...

  THE PROBLEM: it's that I turn off the laptop, pick up the DVD, battery and Commander edge and when I reconected all back, the #1 ERROR IDE is sown again :(((.) Therefore, works, but sometimes it is not. What is the problem? Even with the 45 & 47 pins the message. I have readit pins 35, 36 is something CSEL0, CSEL1...

  I do more short films? Or where I can find a good firmware for my drive or the software to mass the firmware...

  Please read this post and I hope you can help me!

  Hello

  As you already know not all ODD is compatible with a laptop because masters /slave and c - salt settings.
  These parameters are controlled by a firmware and most often but not always these firmware located on sites of car manufacturing.

  I don't think you'll find this firmware on the Toshiba site. It s recommend buying the good player but don't not to Flash the firmware.

  Anyway, I also found the statement on the connection of the PIN 45 and 47 together.
  This is a solution in time and not recommended because it will damage the other pins.

• Tecra 9000 - HARD drive upgrades

  I have a Tecra 9000 and I want to spend the HARD drive, I would like to ask in a 80 GB drive. Does anyone know what I'm looking for? The specifications will be? and if the HARD drive is insert in the Slim SelectBay adapter? Thanks in advance

  Hello

  According to the specs of this device comes with 30 GB maximum HARD drive unfortunately there is no public document what capacity max you can use, but I think that the HDD with 40 or 60 GB should work well.

  More info on which you can get the service or even some offering online partner. Google a bit. You will find a large number of them.

  The laptop HDD 2.5 is big and it will fit SelectBay adapter.

• Tecra A7 - HARD drive upgrade

  Hey,.
  Does anyone know what is the maximum capacity of a drive HARD internal; the tecra A7 can handle?
  Tecra A7-113
  Part number: PTA71E-01Y01DG3

  Hello!

  You can buy each 2.5 HDD that you want because your notebook has a SATA interface and there is no capacity limit like on old hard drives with IDE interface.

  Good bye

• Tecra R10 - hard drive upgrade for SSD

  Can we say if it is possible to change the hard drive for an SSD?
  It would be perfect!

  Why is it not possible? As far as I know Toshiba proposes some models of the Portege with SSD and SATA drives.
  For the time being SSDS are quite expensive and I don't think the best solution.
  What is the reason for the exchange of HARD drive?
  I still have no experience with SSDS, but I've read several articles ve noticed that Intel X25M should be good. According to the tests that has this HARD drive, comparing to other manufacturers, data transfer rate but it is quite expensive.

  Anyway, when you replace the HARD drive please let us know how it works, and describe your experience with it. It can be very useful for other members of the forum.

  Good luck!