Tecra A9 bios (PTS52E) half visible?

Similar Questions

• Need to remove the password on Toshiba Tecra A8 BIOS

  Hello. Dear can Technical Support, you help me remove the password on Toshiba Tecra A8 BIOS?

  Challenge Code = GH1PF-YLL2C-CKQVT-K2U75-JJF0K

  You must send in a center of Service from Toshiba for password removal. There's no other way.

• Tecra S5: Bios updated - cannot change page in the BIOS

  I have improved my Tecra S5 BIOS to version 2.0. But when I enter the BIOS, I can only change properties on the first page PGUP PGDN keys, for change of page does not work for me. Everyone knows the same behavior?

  There is a game of the bios supervisor password.
  Turn on the laptop with the INS key. Now you can enter the supervisor password, and you will get the full bios.
  You can change/clear the password and the policy settings using the password of Toshiba.

• Problem of Tecra M5 BIOS update

  I downloaded the file from the Toshiba site and now have P003Fv370.exe. Race that happens just with "update of the BIOS is not supported OS, unsupported operating system or service pack is installed". I was under the impression that it was independent BONES? Please help, I need to update to stop it crashing and blue screening me every half hour. I have already installed the value-added package.

  I have a Toshiba Tecra M5 PTM51E
  Running Windows 7 Enterprise
  Current installed BIOS is version 1.70

  I also read somewhere on the installation with a USB key, if someone could help I would appreciate it. Thank you.

  Post edited by: deleting
  Just tried again and it says "Could not create"C:\TOSHBIOS. " UPD file! "I don't know what is happening more.

  Hello

  The P003Fv370.exe is a package.
  Right click on that package and select unpack here.
  Now you should see the other folders inside this .exe package.

  From my knowledge, it takes a file that starts the BIOS update.

  If it won't work, I guess you need the original preinstalled system Toshiba update BIOS.
  The other hand I n t think that BSOD appears due to the old version of the BIOS.
  I guess that the update does not solve the problem.

  Maybe the BSOD appears due to a problem of critical software or hardware issues so would be really interesting to know if the same thing happens with the help of preinstalled Toshiba system

• Tecra 8100: bios update of cd. exe does not command line

  I want to update the bios of my Tecra 8100.
  I downloaded the bios, but the pc has no floppy, I cooked up a cd bootable like this

  When I start the pc, F2, press c to boot from the CD-ROM, I get in a dos environment. I went to the drive Z, "dir" and see the bios.exe that I've burned to cd. To run it I type bios.exe and continue to be 'command unrecognized file name' when I type dir *.exe, he does not see the file either.

  Maybe I forget something here?

  + The message was edited by: removed link - bad info +.

  Hello

  Your described method does not apply to Toshiba laptops.
  Each computer laptop manufacturers supports various BIOS update procedures

  Toshiba on this page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=356848&PF=true
  Here you can download the latest version of the BIOS for Tecra 8100

  The 4810.25 package must be unpacked everything first.
  Then you should check the files available.
  There is a readme.txt file that describes how to update BIOS using the ISO to CD.

  I hope I could help

• On Tecra A9 BIOS password problem

  My computer laptop Toshiba Tecra A9 have a problem with the BIOS password and I was wondering if you could provide me the password because I can't access anything whatsoever, without it

  BIOS password is very important security feature and these issues cannot be clarified on public forum.
  Any problems with the BIOS password must be clarified with the Toshiba service provider.
  If your laptop is blocked by password and you cannot access, please contact the nearest service Toshiba and they can remove it for you.

• Re: Remove the Tecra A8 BIOS password

  Greetings,

  It was purchased recently two used computers laptop Toshiba Tecra A8 with serial numbers Y6091612H and Y6091296H. Both were protected by (there not the possibility to go in the BIOS). On the Internet, I found the information he can reset the password by using the response code.

  Is it possible to get the response code?

  This code can obtain only authorized service provider. You as a person private will not be able to do it somehow.
  Contact the nearest Toshiba service provider in your country and explain the situation. They can help you and remove the BIOS password.

• Tecra M11 - BIOS password recovery

  Hello
  I have Toshiba Tecra model:
  Toshiba Tecra M11 - 15W
  Framework/model n °: PTME0E-03J02SEP

  Problem is that I did not use this laptop for quite awhile and I forgot I put a Bios password. Now I need to re - install windows (corrupt), but I can't get my notebook to boot from USB or DVD. To access this menu, I need my Bios password.
  Is there a way I can flash or reset or something like that? I've tried everything, I even wanted to get inside my laptop to find the Bios battery and remove it, but I'm afraid I'm going to break something...
  I can remove the HARD drive and install windows on another PC and continue the installation on the laptop, but I still need this password reset...
  Thanks in advance!

  A few days ago someone asked the same question on this forum. Almanna probably know passeord BIOS is very important security feature and it can be retrieved or cancelled by an authorized personnel only. With other words as close to Toshiba service provider can do for you.

• Tecra 9000 - BIOS block 1 damaged

  I have a Tecra 9000 with a broken BIOS.

  I looked at upgrading the BIOS FAQ [1] and searched the forum (found [2]). However, I have no Windows installation and at least my Toshiba Tecra 9000 doesn't have a floppy drive, so I can't follow the procedure described here.

  You will find my update of the BIOS for the laptop with the serial number 32222375G: http://de.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=DE&userAction=SMP_RESU LTS_PAGE & partNumber = PT900E-08YZG-GR & serialNumber = 32222375 G & USER_ACTION = Serial % 20num ber

  So, what should I do?

  BTW: I can't real poster on this forum. I can't post the exact BIOS error message because the forum software claims that I used profanity. The relevant part is contained in the subject line of the thread.

  [1] [http://eu.computers.toshiba-europe.com/innovation/faq.jsp?FID=TRO0000000b07 |] http://EU.computers.Toshiba-Europe.com/innovation/FAQ.jsp?FID=TRO0000000b07]
  [2] [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0]

  Hi uAyjYdKT,

  Download a version on diskette in the bios called "trad.
  -You can always start your machine?
  -You can install anything on hard drive?

  If both answers are Yes, follow these steps:
  -do a back on your hard drive installation (this can be done on another machine)
  -unzip / uncompress the bios disk do a hard drive
  -Insert the hard drive of your machine and run the bios update

  If the responses were not: see one servicepartner to have made

• Tecra 9100 - BIOS block 1 damaged and the update of the BIOS?

  Hello

  I have an old Tecra 9100 with years of quality service, and it is my first problem, but is a great, after a forced restart the display shows the message BIOS 1 damaged block. I tried to fix the BIOS upgrade to the latest version I found, the 1.6 one, but it is a version of Windows (to upgrade a Toshiba computer I think) and when I try to run it in another computer to generate a floppy and upgrade the BIOS drive, I can't, because a common message from modules of Toshiba.

  Its there any floppy BIOS image - archive I can download to perform the BIOS update the BIOS?

  Thanks in advance.

  Hello

  All you can find is stuff on the Toshiba support page. I don't know where you live, but try to contact nearest Toshiba authorized maintainer.
  They have access to the database of Toshiba and they can get it for you. Call and ask for help. I'm sure they will help you fix this BIOS.

• Re: Tecra M9 bios update without windows

  I have a Tecra M9 runs only [Opensolaris 2009.06 | http://opensolaris.org/os/downloads/] on this subject.
  Is it possible to do a Bios Update (acutally I have 1.50)

  Is there an ISO image or back - tools so I can create my own ISO image...

  Thank you
  GerryH

  Hello

  I doubt you'd be able to update the BIOS on the Opensolaris OS.

  The Toshiba page provides only focused on the victory of the BIOS, which means that you need to install windows to update the BIOS.

  The traditional BIOS version allowing you to update the BIOS by using the USB disk is not available for download.

  I think that only FSA (authorized service providers) availability to perform a BIOS update using the diskette.

• Tecra M5 - BIOS version 3.5 is a real update?

  The 'last' available BIOS is 3.5. Yet, I am currently sub 7.1 downloaded a few months back.
  Is a true 3.5 update?

  Hello

  Where did you get the version 7.1 of Bios for Tecra M5?
  Have you found on the European driver Toshiba page?

  Well, to my knowledge Toshiba provides different BIOS. Some BIOS versions are compatible with XP and others only with Vista. And there is also a BIOS that can handle the XP and Vista together.

  The European driver Toshiba page indicates that the BIOS version 3.5 is OS independent.
  So I presume he manages two operating systems; XP and Vista.

  Unfortunately, I can't say anything about version 7.1 of BIOS because it s I don't not known.
  There is no information about it on the page of the Toshiba driver :(

  Best regards

• Tecra M5 BIOS is not compatible with Windows Vista

  Hello, I ran the Vista Upgrade Advisor from Microsoft, and he pointed out that the BIOS on my Tecra M5 was not compatible with Vista and to contact Toshiba. I am running version 1.7 - the most recent available I think. Toshiba will release a version that will be compatible with Vista, or a fix so that I can run Vista on my M5?

  I forgot to mention that the machine is a M5 UK (PTM51E)
  Thank you very much

  David

  Hello

  I guess Tecra M5 Vista capable label. Am I wrong?

  I know for each unit of Vista, laptop manufacturer will offer the proper BIOS version, as well as drivers, tools and utilities.

  In short time Vista will be placed on the market and after the official launch, all this kind of stuff should be available on download page.

• A few questions on the Tecra M7: BIOS, memory, drivers

  1. How will I know how my 1 GB of RAM is set to the device: 2 * 512 or 1 * 1 GB? I want to know that for a possible update.
  2. How can I access BIOS?
  3. I want to upgrade to Windows Vista, and I ask the necessary information on the Web site specified in my documentation. Yet, no sign of them. Other users of Tecra M7 have some sort of experience with this?

  Hello

  I m not a Tecra m7 owner but I would like to clear some things:

  (1.) I recommend using the diagnostic application of 3rd party like Everest Home edition to see what has been installed or not ;)
  (2.) to access the BIOS, please try the ESC button. It s a BIOS Toshiba and then ESC and then F1 should work.
  (3.) I don't recommend upgrading the operating system to Vista right now if you want to use the features of all laptop. Why? Its simply-> there are no drivers for Vista. We will have to wait

• Tecra S2: BIOS 1.3 is not compatible with Windows Vista

  I just bought Windows Vist Ultimate and I tried to install it on my tecra laptop S3 and it said that I had to update my bios. so I've upgraded to the latest version on the toshiba site (v1.3), but I got the same message please provide an upgrade of the bios that is compatible for my computer vista laptop or provide where I can find the update.

  Hello

  Pilot site Toshiba says that the 1.3 BIOS Tecra S2 was released on 06/19/2006
  It seems that it s not a final version of Vista and therefore it s is not compatible with Vista.

  Unfortunately, everything that you expect the Vista installation until the new version of the BIOS is available.