Re: Tecra M9 bios update without windows

Similar Questions

• Z500 BIOS update on Windows 8.1

  Hello

  I have a Lenovo Z500 laptop and I would like to know if it is safe to run 1.21 BIOS update for Windows 8 on Windows 8.1 64bits? I have a problem with the Fn keys and in my current (1.10) BIOS, there is no option for it.

  Sorry for my English and thank you for your response.

  mlukas wrote:

  Hello

  I have a Lenovo Z500 laptop and I would like to know if it is safe to run 1.21 BIOS update for Windows 8 on Windows 8.1 64bits? I have a problem with the Fn keys and in my current (1.10) BIOS, there is no option for it.

  Sorry for my English and thank you for your response.

  The bios is not dependent on OS. I think that the flash program used to update the bios work correctly under windows 8.1. Before you do the update try to make a backup of your current bios so that you can always come back if you wish. See the image below on how to do the backup and update the bios.

  

• Problem of Tecra M5 BIOS update

  I downloaded the file from the Toshiba site and now have P003Fv370.exe. Race that happens just with "update of the BIOS is not supported OS, unsupported operating system or service pack is installed". I was under the impression that it was independent BONES? Please help, I need to update to stop it crashing and blue screening me every half hour. I have already installed the value-added package.

  I have a Toshiba Tecra M5 PTM51E
  Running Windows 7 Enterprise
  Current installed BIOS is version 1.70

  I also read somewhere on the installation with a USB key, if someone could help I would appreciate it. Thank you.

  Post edited by: deleting
  Just tried again and it says "Could not create"C:\TOSHBIOS. " UPD file! "I don't know what is happening more.

  Hello

  The P003Fv370.exe is a package.
  Right click on that package and select unpack here.
  Now you should see the other folders inside this .exe package.

  From my knowledge, it takes a file that starts the BIOS update.

  If it won't work, I guess you need the original preinstalled system Toshiba update BIOS.
  The other hand I n t think that BSOD appears due to the old version of the BIOS.
  I guess that the update does not solve the problem.

  Maybe the BSOD appears due to a problem of critical software or hardware issues so would be really interesting to know if the same thing happens with the help of preinstalled Toshiba system

• Tecra M4 - BIOS update fails

  I'm updating my M4 with the Toshiba BIOS provided for support of Windows Vista. It can be found here: http://www.csdsupport.toshiba.com/tais/csd/support/windows_vista/vista_beta.cgi?lsAction=list_files&model_id=1

  However, the update process fails. I can unzip the file downloaded to a file, but then fails it to process with a generic-looking message "install2 has encountered a problem and needs to close."

  My M4 is currently leading the BIOS version 1.70, 14/02/2006.

  Any ideas? Maybe is there a way I can do an update of the traditional BIOS with the new file?

  Be careful with the BIOS updates. I put t know where you bought your Tecra but you try to install the update BIOS, designed for the laptop models in the United States.

  If you have European mobile phone use just updates BIOS you will find under http://eu.computers.toshiba-europe.com > support & downloads.

• Tecra 8100: bios update of cd. exe does not command line

  I want to update the bios of my Tecra 8100.
  I downloaded the bios, but the pc has no floppy, I cooked up a cd bootable like this

  When I start the pc, F2, press c to boot from the CD-ROM, I get in a dos environment. I went to the drive Z, "dir" and see the bios.exe that I've burned to cd. To run it I type bios.exe and continue to be 'command unrecognized file name' when I type dir *.exe, he does not see the file either.

  Maybe I forget something here?

  + The message was edited by: removed link - bad info +.

  Hello

  Your described method does not apply to Toshiba laptops.
  Each computer laptop manufacturers supports various BIOS update procedures

  Toshiba on this page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=356848&PF=true
  Here you can download the latest version of the BIOS for Tecra 8100

  The 4810.25 package must be unpacked everything first.
  Then you should check the files available.
  There is a readme.txt file that describes how to update BIOS using the ISO to CD.

  I hope I could help

• Equium A110 - 276 BIOS update for Windows 7 32 bit

  "Hello everyone, I'd like to update the BIOS on my satellite A110-276 and the two choices are 'OS Independent' and ' Windows Vista 32 bit. I have Windows 7 32 bit on this laptop. If I choose "OS Independent" it tells me ' Bios is NOT compatible for portable computers with Windows Vista! "and if I choose" Windows Vista 32 bit ' he reads "Bios is only compatible for portable computers with Windows Vista!

  Exclamation points are Toshiba, not me ;)

  So I am stuffed and I need to stay with my current BIOS, or can, I use Windows Vista BIOS update?

  Thanks to anyone who can help!

  Hello

  First question; Why do you update the BIOS?
  Do you want to update only to have a newer version?
  If your Windows 7 is working well, then a BIOS update is not necessary.

  Otherwise, install Vista OS to Toshiba Recovery (if available) disk, the BIOS update and then change to Win 7 ;)

• Tecra S3: BIOS update for Vista

  I have a laptop Tecra S3 and I tried to install vista but it says I have to update my BIOS. Well, I already have the latest version (v1.3) and no vista support.

  Any help is appreciated
  Thank you

  Hello eddie

  There are not a lot to say. If your device has sticker Vista capable Toshiba will support them to upgrade to Vista. When not I Don t believe you will find Vista BIOS update in the future.

  Also, my Satellite M70 is not Vista capable, but I'm really lucky and have preinstalled Vista on the second partition.

• Tecra 8000 BIOS update

  Help... my first visit on this forum looking for a kindly soul to out me of trouble. My wife has a Tecra 8000 (European version) with P2 400 mhz. To start, she "prepares for the BIOS update". I managed to find what seems to me to be good download on this site, the 'traditional' version for computers that do not run on 500 mhz or higher? Only problem is that I know this must be installed through FDD we have with the laptop, but we have no way to open the file on disk. Neither our computers from home or at work have a floppy drive to open and copy the downloaded file. We were wondering if anyone has a copy, or access to a floppy drive to produce a copy and send it to us? We would be more than happy incurred to help us.

  Hello Brian

  Please check this page http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&from=faq_selection&CFID=BIOS&FI D = TRO0000000b07. It is described how you can create the BIOS update disk, and the correct procedure of updating the BIOS for your laptop model.

  It is not complicated. I'm sure you can do it alone.

  Good luck!

• Tecra M11 - BIOS update error

  Hi, initially, I'm sorry for my bad English, I'm from the Germany...
  My Tecra M11 motherboard has been replaced by Toshiba. After that, I can't update the BIOS
  I fill the SN of my M11 and downloadet the latest Version of the Toshiba homepage.

  But when I install the Package from the BIOS, there always was the same Message: "this computer is not supported.
  Is the person who can help me :)

  Lars cordially

  Hey,.

  What operating system you use and that you have installed the package of added value? Latter is necessary if you want to make a BIOS update.

  But theoretically the DMI information could miss after replacing the motherboard. It must be written from an authorized service provider

  But why you want to update the BIOS? You have problems?

• Pavilion Media Center M8400f Bios Update for Windows 7

  HP Pavilion Media Center m8400f. The Vista operating system has been replaced by Windows 7 (64 bit) a number of years.

  I've updated one of my hard drives with a SanDisk SSD (it is now my main drive with the operating system and all my files on board).

  The bios on the PC has never been updated.

  The SanDisk SSD dashboard software will not recognize the SanDisk SSD as the system has designated the SSD as a SCSI device. I need to access the bios for this change to AHCI. The current bios does not support this.

  The PC has a card mother MCP61PM-HM. There is no update for Windows 7 BIOS for that motherboard I know (updates Vista only).

  　

  SanDisk gave me a link to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-82094-1&cc=us&dlc=en&lc=en&... that shows a card mother M2P61PM-HM for m8400f desktop PC. This Bios download supports Windows 7 (64 bit).

  Can update the Bios to download safely a card mother M2P61PM-HM for card mother MCP61PM-HM I currently have?

  Hello

  The HP BIOS update link provided SanDisk is an update of the BIOS of your PC. It is listed under Win Vista 64 bit driver downloads here.

  If you look at the site to download the drivers for your PC you'll only see driver support for Win Vista but on 2010-04-08, Version 5.29, 1.47 M BIOS updatedshows support for Win 7.

  But the problem is this: the BIOS updates must be performed using the PC operating system comes with; in your case, Win Vista. Extreme care must be exercised when updating the BIOS under normal circumstances. I would not classify your situation as usual.

  I saw others download an update of the BIOS for their PC and try to install an operating system upgraded with disastrous effects. The PC was bricked.

  Be prepared for the worst case if you try to install the update to the BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• Can't update without Windows of self-destruction!

  After the update a few weeks ago... Bad software removal tool... My father PC had white exclamation points all on that screen P.O.S.T.... then the screen would go and NOTHING...! Restart, and then go to the Startup Repair tool... Windows Startup Repair tool cannot fix... you want to restore?... long story short... so the only thing that worked was a REINSTALL FACTORY...

  NOW... I can't update anything... Update Windows and not even a no driver for the graphics card! If I... I will return to white exclamation on fullscreen P.O.S.T.... then NOTHING... points! I've restored the system several times and tried to update, only to have this accident to happen once I update... There's something like 83 updates and it's too much to try to step up to the problem... Heck I think is not yet get it until the first service pack!

  On top of OFF... Microsoft tool for support does not even recognize its product ID... even when I enter it manually... all YES, I'm in the correct information!

  As you can imagine, it's really a bad situation and bad support (no I don't want to pay Microsoft an another $50) it made it worse. After buying Windows since Win95, Xbox, 4 Xbox 360 (thanks to free material you knew was broken) and a Zune... I really think to change and do not return!

  Someone at - he lived it and managed to isolate the problem... I have the exact system he has, even screen, same graphics card, etc... and I am able to update without ANY problem!

  Thanks in advance! And sorry if I'm angry... I worked on it for about the last three weeks!

  Dan

  If you have a brand of computer, HP, Dell, etc, you are not eligible free Microsoft Support.

  All support is the manufacturer of your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• HP Pavilion A6750Y Bios Update for Windows 7?

  Hello, I bought a HP Pavilion A6750Y years that I have been very satisfied.  I have of course updated from Vista to Windows 7, added a video card and I'd really like to upgrade my cpu.  So far, in the Support & drivers for my computer, it lists still my motherboard as being able to run up to a processor AMD Phenom 9950 x 4. I noticed however if I list my OS as Vista 64-bit, then it does in fact appear a BIOS update that would allow the MOBO to exploit some AM3 cpu. It would still work for my computer running Windows 7, or y at - it an update of the BIOS in preparation for Windows 7, otherwise I would really like to make the request. I want to spend my processor to a Phenom 2 x 4 and need my MOBO to support AM3 processors. Thank you in advance.

  Hello:

  I wouldn't update the BIOS by using Windows 7. There is more than 95% of probability you will make the PC unusable.

  HP will release no updates to the BIOS of windows 7 for your PC.

  If you want to update the BIOS, your only alternative is to install Vista, updated the BIOS and then reinstall W7.

  Paul

• Tecra S5: Bios updated - cannot change page in the BIOS

  I have improved my Tecra S5 BIOS to version 2.0. But when I enter the BIOS, I can only change properties on the first page PGUP PGDN keys, for change of page does not work for me. Everyone knows the same behavior?

  There is a game of the bios supervisor password.
  Turn on the laptop with the INS key. Now you can enter the supervisor password, and you will get the full bios.
  You can change/clear the password and the policy settings using the password of Toshiba.

• Tecra M5 Bios Update 1.7: where can I find information?

  Simple query: where can I find the details of what improvements / issues at this address from the bios update?
  (I'm particularly interested in what whether that addresses the anomalies in the power management for example screen showing no not after recovering from hibernation...)
  Thank you very much

  Hello David

  Unfortunately, I have to disappoint you and say that you will not be able to find this document. But it is possible that this problem is solved with the new BIOS update. Be careful with BIOS updates and read the BIOS update description prior to treatment.

• Tecra S10 BIOS update 1.70 - anyone know what is included?

  I hate the fact that all these years that Toshiba aflter still insists on not to provide a list of the changes on the new BIOS updates.
  It's boring.

  Unfortunately, there are details on changes to the BIOS.
  But I guess there are some performance enhancements
  However, if your laptop is running troubelfree I see no reason why it should update