Tecra M5 - can I put second SATA HDD

Similar Questions

• Tecra M5: Need support USB2 for SATA HDD

  My beautiful new Tecra M5 uses a SATA drive, but most USB enclosures still accept only IDE drives. My question is: does anyone know of a door-USB2 for a SATA drive?

  I would like a similar disk box USB2 to backup my Tecra laptop by cloning the full hard drive (using Casper XP). If/when the primary drive fails, or some other calamity, all strikes do I have to do is to replace the internal drive with USB support. (It is not so common, but my hard drive failed once, and the cloned drive saved the day).

  Until I can find a SATA support I use Acronis True Image to backup on an IDE drive images in a USB support. Even if it seems effective, I'd rather have a cloned drive because it is easier to make a recovery dummy to prove that the procedure works without risking to damage the data on the primary disk simultaneously.

  David Tong.

  Hello

  As far as I know the external uses the IDE interface.
  I have not seen cases of HARD drive external for a SATA HDD.
  But you can also use the external USB case with an IDE interface for backups. But you need a new HARD drive. But the HARD drive are not very expensive (depends on the size of the HARD disk)
  You can save the backup image to a file and then you can place the file on the external HARD drive.
  If something goes wrong with your OS, so you can use the backup file to restore your operating system.

• Installation of a second SATA HDD in 500-304nd Pavilion

  I recently bought the Office mentioned in the topic, as well as a second 1 TB SATA HDD to add. I found the connections for a second car but unable to find a place on the computer chassis to physically install the disk. What is the secret here? Do I need a room to mount the HARD drive and if so: where can I find one?

  Thanks for your response!
  
  I found a simple solution to mount the second HDD:
  -J' noticed that the HARD disk that comes with the computer is mounted using the holes at the bottom.
  -J' used the screw holes on both sides of the HARD drive and those identical on the second HARD drive, using four strips of metal (with screw holes on the same distance as the thickness of a HARD drive) and eight live, to link the two together.

• Can I put my SATA drive on my PC?

  I have an old HP Pavilion (very old) with 80 GB SATA a1220in. Yes, you think I do with such an old PC, but it is appropriate for my use, as I'm not a hardcore gamer or anything.

  So, what I want to ask is, can I put my hard drive on this PC? It's 80 GB which takes no time to fill up, and yes I can use the external hard drive, but I don't want to attach an external hard drive whenever I start my PC. And added, I want to Dual boot in another operating system.

  Most of the time the drives built for the Protocol SATA II will also work with the controller in the PC in discussion.  It's questionalbe whether SATA III or SATA 6.0 GB drives will be unless they expressly declare that they can be made to work with it.  SATA II or SATA 3.0 GB usually can be changed either with a rider or a software to run on the SATA I controller.  The link you show referencing the SATA I or SATA (serial ATA-150 - what your motherboard calls it) explains the old SATA: SATA revision 1.0 - 1.5 Gbit/s - 150 Mbps

  I suspect only an old SATA revision 1.0-1.5 Gbit/s - 150 MB/s will be hard to find, but a SATA II drive, which can be set with a jumper will work fine. See this page from WD:http://wdc.custhelp.com/app/answers/detail/search/1/a_id/1337/c/130/p/227, 294

  BTW: Find a SATA II WD drive which has the jumper and it will be fine.

• Tecra 9100: Can I put the USB 1.1 to USB 2.0

  can someone tell me if the tecra 9100 can be upgraded to work on USB 2 instead of the USB 1.1?

  Hi Keith

  Unfortunately, something like this is not possible due to the physical limitation.
  The USB speed depends on the material and not on the software.
  So any chipset, drivers, software, etc to update won't help you and will not increase the speed of the USB port!

  Simply said that the speed of the USB port is not editable. :(

  Greetings

• Tecra M4: Can I put video/motherboad?

  Hi all

  I intended to put Vista on my Tecra M4, and the only issue he has with him, it is that I won't be able to run the Aero interface, because I have the GeForce 6200 (the 6600 was not available when I bought the laptop). So I was wondering:

  (1) is it possible for me to upgrade the video card?
  (2) if not, and it is a part of the card mother, is - it possible for me to make some laptop computer serious surgery and update the motherboard to one with the 6600 card on it?

  Thanks in advance!
  Josh

  Hello Josh

  If you need better laptop I recommend sell you your Tecra and buy a new one. On the mobile computer surgery is not possible as on most PCs.

• Can I use second HDD on my Satellite P300-PSPCCE?

  Hi all

  I have a German P300-PSPCCE bought a few months ago. I noticed that the laptop has two bays for 2.5 "sata DISKS, which one is already ocupied by the drive by default, and the other has some ankles plastic on the portable drive door, which makes impossible to another harddrive on the Bay.

  The question is: if I remove the pins plastic of the door drive and put another HARD disk, with appropriate fixing stuff, the laptop can handle? (power, motherboard compatibility and so on...)

  The second is:

  Recently, I had an old P200 mother due to a bad Connection USB with an experimental device that I developed burn.
  Now it s hard to find this old P200 motherboard.
  I m planning to buy a motherboard of the P300-PSPCCE mine, but I Don t know where to find such a thing, so I m asking if anyone knows where I can find it, please can U show me the way?

  Thanks for any answers

  Daniel.

  Hello Daniel

  My brother has Satellite P300 and we found the same situation.
  Most important is if your laptop has connector to the second HARD drive. If so, you can connect but it needs the HARD drive cover.
  My brother has deleted these rods plastic carefully and everything is OK now. It uses 250 GB SATA HDD.

  Old motherboard, you can try to get a Toshiba authorized service provider in your country.
  Another way Google a little bit and see if you can find some online store where you can order one.
  Another option is to check eBay.
  Maybe you can find some old P200 with broken screen, but with good working motherboard.

• Re: Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  Hi all

  I have a tecra S3-PTS30-E, which came from the company, I work for which was no longer necessary.

  I replaced the current 40 GB with two different - hdd

  Western Digital 250 GB WD2500BPVT

  Toshiba 120 GB - MK1252GSX

  I tried both separately and windows XP pro service pack 3 will not recognize either.

  I have downloaded the driver sata toshiba Web site and installed via F6 at startup, windows asks you what driver, windows 2000 or XP, I click on XP and you enter, windows continues until advising so none found HDD

  I also tried to download drivers intel after searching other threads, and it does not work through floppy.

  I also added the drivers toshiba XP ISO using nlite to create a disk slipstream and while xp is loading the disc, I noticed 'pilot toshiba raid' being installed. Same no result no hard drive found.

  Can anyone help?

  Thank you

  Jin

  > Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  According to the specifications on this page:

  http://reviews.CNET.com/laptops/Toshiba-Tecra-S3-s411td/1707-3121_7-31556311.html

  Your laptop's Ide interface, as far as I know on the old IDE interface there is a limitation of LBA 28 bits, which means that the laptop can only manage hard disks up to 128 GB.

• Can I put an external resolution 1440 x 900 on Tecra A3X

  Hello

  can I put a 19 Dell 1908WFP Ultra strong (1440 x 900) on a Tecra A3x position monitor interface?
  It's a wide screen, and must be run on the resolution of 1440 x 900.

  I have to make a presentation in England and cannot test it because the monitor is here.
  The documentation says that you run a monitor station 1600 X 1200 with 16 colors, but what is widescreen? These modes are listed?

  I hope someone can help because I don't want to stay here and my presentation is cut or with black borders.

  Thank you very much

  Bjoern

  Hello

  I don t think you will be able to use the resolution of the widescreen 1440 x 900 on the external monitor.
  I downloaded the user manual and there you can find the info that these resolutions are supported:
  1024 x 768
  1280 x 1024
  1400 x 1050
  1600 x 1200
  1920 x 1200

  In addition, a high-resolution external monitor connected to the Tecra A3X can display up to 1600 x 1200.
  But you should also know that even if the chip of the graphics card would support the wide screen resolution, you would not be able to choose 1440 x 900 if the graphics card driver could not support this resolution.

• Can you put a 500 g SATA hard drive in Pavilion a750w?

  Can you put a 500 g SATA hard drive in Pavilion a750w?  The bios is version v3.26, and the operating system is XP with SP3.  40 gig HD is full and you are looking to replace it but do not know what the size limit is with this bios version.

  Here are the specifications of your HP Pavilion a705w desktop. This is based on the assumption that you converted the 5 and 0 and the fact that you mentioned a 40 GB hard drive.

  You already have the most current version of the BIOS of your computer and running the most recent service pack of Windows XP. Your computer and the operating system should support a drive of 500 GB without problem. The only problem is that your computer isn't any SATA ports, only 66/100 IDE (PATA). Look at local retailers and online for the IDE drives.

• Can cling to the blue SATA port on the Mobo for optical drive SATA HDD

  Studio XPS 435 t/9000 Office

  Service Tag:

  This box has the following motherboard in it.

  X501H Dell Studio XPS 9000 435 t LGA1366 Intel X 58 + ICH10R DDR3 motherboard series

  There are (5) SATA ports on the internal motherboard.

  
  SATA1, SATA2 - blue color Code, I (1) optical internal drive attached to the SATA1

  SATA3, SATA4, SATA5 - black color code, I (3) HARD drive connected 3,4,5

  The blue color SATA2 port is open

  Can I connect a 4th HDD SATA blue SATA2 port?

  Or are the blue SATA ports only for optical drives

  It will cause some problems if I hang a 4th HARD drive SATA2 port blue

  Hi rgadawg,.

  Welcome to the community.

  Blue SATA2 port must be compatible to connect to another hard drive. He should not ask any questions however, Studio XPS Installation Guide Page 57 under specifications says he has three bays for hard drives SATA 3.5 inch disk.

  http://Dell.to/YbYwib

  Thank you & best regards
  Mustapha S
  #iworkfordell

• I had a subscription to photoshop and aftereffects. Can I put these programs on the second computer or that will bring several times?

  I had a subscription to photoshop and aftereffects. Can I put these programs on the second computer or that will bring several times?

  Creative cloud products are not transferable. You need to download again.

  Please see:

  Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Concerning

  Megha Rawat

• RE6500: Can we put a band exclusively to the router and the second band exclusively for customers?

  The RE6500 reissue just the two strips of dual band router or can we put an exclusive router/extender traffic band and another band exclusively for wireless clients?

  Hi RpDn. The range extender has to a Cross group feature that allows him to choose the appropriate path for transmitting data between the device and the wireless router, but it doesn't have an option where you can manually configure the settings t. With the new models of range extender, this option is already available. See this link for more information: http://www.linksys.com/no/support-article?articleNum=156245

• Can someone tell me why my phone will not be updated? I can't put it to day/download apps either.

  Can someone tell me why my phone will not be updated? I can't put it to day/download apps either.

  Try to reset the App Store:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. You may be able to pick up the tab App Store covering scribbles to the left.

  Then sign out of the iTunes Store (in the settings).

  Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

  Then reconnect to the iTunes Store.

  Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.

• How can I put shortcuts to websites in a bar (?) tool bar/browser... dunno what it's called. With IE, I can just drag the tab of the site to the area I want.

  How can I put shortcuts to websites in a bar (?) tool bar/browser... dunno what it's called. With IE, I can just drag the tab of the site to the area I want

  Near the right end of the address bar is a White Star which can be hard to see, but look closely. When you want to add a shortcut to the toolbar, double-click the star. A window opens with the name of the Web page. Under this is the area of folder which will probably read "Unsorted Bookmarks". Click on the drop down arrow and change it to "Bookmarks Toolbar", then click done.

  I have several folders on my toolbar such as music, Mail, etc. in which I add several Web sites. If you want to add a folder, click on the second drop-down arrow next to "Bookmark Toolbar" and click on "New folder" and give it a name.

  To add a bookmark to a folder, once again double click on the star, make sure you're in the bookmarks bar and click one of the fall of two arrows to find the name of the folder.

  For other bookmarks use Menu bookmark. What is added here are accessible through bookmarks in the menu bar. If your Menu bar with bookmark, file, display, etc. is not visible, click the ALT key and they will become visible. To keep the menu bar, click view, toolbars and check the menu bar.