Tecra M5 - how to remove the screen hinges
I need to replace the hinges of the screen (well one of them anyway)
I have the manual maintenance and computer in bits.
The manual says "Disassemble the hinge (left) while drag and spin it.", but no matter how hard wiggle/slide/tour that I can't get out.
Same problem with one of the other side.
Someone has it already done this and have any advice or know of an educational video somewhere?
To my knowledge there is no textbooks that would show you how to disassemble the unit. Such dismantling manuals are made for the Toshiba service guys.
Then maybe you'll find some tips and tricks on YouTube or would need to contact a Toshiba technician to remove
Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.
Can you please help me with this!
Thanks in advance!
Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
You could damage other parts that you know
You're stuck on the LCD mask?
As far as I know the LCD mask is covered by two screws that are hidden under the joints.
You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.
But note; Be careful, don't use any force!
My Tecra M5 got a password for BIOS from one day to the other, I never told him to do.
All of my passwords do not work, so how can I reset the password?
Please help me :)
I never heard that the BIOS password can be activated only then I m wondering really how that can happen in your Tecra M5.
You must understand that the BIOS password is a very important protection and we cannot discuss in the public forum about this.
How to remove the BIOS is not always the same and Tecra, as cell phone business model, is quite complicated procedure of withdrawal of the BIOS and it can be made by Toshiba only service provider.
How to remove the memory module?
Get the following message and for me, it means that one of the modules is broken:
Out of memory error
Address = H 00034000
Read Date = H 28034000
Write data = H 00034000
For my opinion, the computer should start up again when I remove the memory broken slice?
The Australia has soon
You can easily remove the memory modules.
I think that the Bay is placed at the bottom of the unit.
Remove the screw that is blocking the Bay, and you will have access to the module.
Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
I hope this helps a little
How to remove this screen
I tried disabling the debugger option in publication of flash CC settings. I always get this screen?
After unchecking the option of the debugger you republish your air application and then check the date of creation of the application you are testing?
I have a Tecra A3x who died before Christmas. I bought a motherboard replacement on eBay. I mounted the motherboard and the powers of the Unit well stop but to a password screen that is black. I tried to find a way to wipe the BIOS and have removed the CMOS battery for about 10 minutes. I read that most laptops have a jumper built in too fix. I've looked in the usual places - memory modules etc. I can t find it anywhere.
Any help would be very welcome.
As you probably know BIOS password is very important security feature and remove the BIOS password can be described on the public forum of the manufacturer s. It is a kind of top secret information.
It is not logical to do this, right?
Each Tecra A3X stolen with BIOS password could be unlocked.
In my opinion, you should contact the person who sells you this motherboard and request password. If he cannot stop, return. At this info in the description of the product on its offer to ebay?
+++ Problem +++
No change possible 'Building in HDD Password'.
The generation in HARD drive password' is known - but cannot remove the 'build in HARD drive password'.
+++ Progress +++
(1) parameters of the BIOS "Password."
Is not registered
(2) the "HARD drive password" BIOS settings
HARD = built-in HARD disk drive
Password disk HARD = only user mode
Registered = user password
+++ Procedure +++
Change the setting "User Password = recommended" with BACKSPACE
of 'user password = Registered' to 'user = password [empty]. "
It follows the question: ' are you sure? [Y/N] »
With this screen, the "User password" settings are changed back on "registered."
No message appears as "Disabled" or empty cell.
After the confirmation on my side, the laptop starts without asking 'building in HDD Password.
After restarting the laptop (2nd) ask the requested 'building in drive HARD password '.
+++ Request: +++
How is it possible to remove the 'building in HDD Password'?
Background is to create an image file from the hard drive without the laptop original.
So all the security settings should be disabled on the hard drive.
Your support is welcome
Post edited by: Mluepke
I know, HARD drive password can not be deleted. Please see the follow-up documents:
When the e-mail there are ads on the screen of the scroll bar blocking cannot scrolling up/down how eliminate these unwanted ads
If you use firefox, you can use adblock plus (which is an add-on firefox) to block advertising completely.
I have mobilized the screen enlarger and I now want to remove it. I can't find a way to eliminate it to come when I start my computer.
To turn off the Magnifier
1. go in Control Panel
2. double-click on accessibility
3 make your computer easier to see, click on the link "make the computer easier to see.
4. on the brand of the computer easier to see, under "Do things to the bigger screen", uncheck "turn on the Magnifier.
5. click on 'Apply' and then 'save '.
I hope I could help
I just got a M5 from ebay that has a bios password. I know the password, but I want to get rid of it, so that the laptop is not protected.
I installed the password utility, but all options are grayed out (I'm logged on as administrator in windows xp)
Tried to change password in the bios but just get "Suppression refused" (I see only half of the bios options)
See you soon
> I know the password, but I want to get rid of it, so that the laptop is not protected.
The BIOS password can be removed in the BIOS settings.
I put t understand that it is not possible in your case.
First, you will need to insert the current password.
Then, you will need to insert the new password. If you want to remove the password, press ENTER (leave the new blank password option). Then press again the button ENTER.
Save the changes by pressing F10 and exit the BIOS.
Usually, this should work.
I have a question. Maybe can someone help?
I'm trying to remove the inverter. The cables that go from the inverter to the main Board are easy to remove. (This is a connector). But I can't remove the cables that go to the LCD inverter. Is this also a connector? I should just shoot it? I guess it's a connector, as I see it for sale on eBay, the inverters are without cables, but I just can not remove it by shooting. Can someone give me some advice, please?
Unfortunately I can't go into details but, as far as I know FL inverter is connected to the motherboard and it is connected to the connector or kind of jack. It should be just removed.
I help a charity with their COMPUTER problems. They had a Tecra 8100 given for their c/o recovery disk and disk utility use... the doner however never gave the password.
I am trying to reinstall from the recovery disks, but I get a request a password to... How can I re install from the recovery disks.
Thank you very much...
I guess you mean the BIOS password that occurs at the beginning.
Well, you can not remove this BIOS password by yourself. Only the Toshiba service partner can do.
In this case contact service in your country, and it can remove this password.
I'm losing all my icons because of my screensaver file is bad, please help me remove this file. Thank you... JAY PATEL.
1 are. what screensaver and icons you referring?
2 have you installed any third-party screen saver file?
3. what exactly is the problem?
Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
How to ask a question
If you try to uninstall third-party screen saver then the article below might help you to do.
How to change or remove a program in Windows XP
I am repairing a laptop Tecra A6 for one of my clients.
For the first time, I fixed it for him, the hard drive was blocked from password and I had to reformat using an online service.
This time, when I took my customer's computer everything he had put on his computer was the fingerscroll / password to connect to the account, there was no protection of password on hard disc tray.
I brought it back to the shop, she booted up and immediately, I wonder a password to unlock the drive.
Somehow, the hard drive has developed a password.
(1) is there a possible problem with the hard drive?
(2) at - it a solution without having to wipe the hard drive
(3) Toshiba has tools or the default password that would unlock it
The hard drive is a Toshiba MK6034GSX 80 GB.
Any help please?
The HARD drive password can be removed ONLY if the old password would be known to you.
If the HARD drive password is not known to you then you will not be able to delete
In this case, the HARD drive is blocked and is no longer usable.
Here's a little description:
Is there a description available hoe to remove a hard drive in a Tecra R10 and plugin a new hard drive?
As far as I know, the HARD drive is placed under the hood of the laptop and so many parts must be removed as a CD player, keyboard, base assy, etc..
In my opinion it of a delicate procedure and must be done by a technician laptop because a lot of screws must be removed as well.
Current HARD disk is defective or why you want to exchange it?
Maybe you are looking for
Hello I have a question for users or people who play with this equipment.I can't find information below:GeForce gt 740 m in this particular model has a 64-bit or 128-bit memory bus? ConcerningMarek
I have a problem with my printer Epson Surecolor P600. Support of Epson are blaming my MAC! I want to print a panorama on roll paper, but the printer will scale down the image to A3. I am an experienced printer Epson user, custom sizes are defined, n
Last updated on Windows 7 cause "Crash Dump" on my computer. Watch journal update KB2264107 and KB2454826 will not settle. I do a system restore to get back. I tried the "auto update" three times.
By tapping on the top left of the mouse pad, I can turn off the mouse. This feature has stopped working.
I failed 4 times to install Office pro more 2010 updates Vista Home Prem SP2 - help I tried the suggestion of restarting without result! Error code 80070652 (unknown, of course!) Details: Update of security for Microsoft PowerPoint 2010 (KB2553185) 3