Tecra M5: Received my disabled point key
Hello
I'll have any problems with my Tecra M5.
Earlier my got hotkeys disabled then I did a complete reformat and now am disabled comma key.
I tried to do a system restore, but it does not work
I'm fed up with this system.
Please someone help.
Thanks for your time
What? You have disabled the comma of the keyboard key!
Your post is a little confusing
Maybe you have changed the language of the keyboard layout?
Please check this!
You can change the language of the keyboard layout in the-> regional and language options control panel.
Tags: Toshiba
Similar Questions
-
HP Presario V3000: Bios disable the KEY for HP Presario V3000 - HELP!
Help, please!
I have a HP Presario V3000, I forgot the password of the BIOS, disable System KEY is: 08638, can someone help me to unlock it? Thanks in advance!
Saul Martinez.
:
Please read the first post on the link below for what to do with the stop code, which should solve your dilemma.
http://h30434.www3.HP.com/T5/notebook-operating-Sy...
Then...
You can:
1. use the unlock code you generated to enter BIOS
2 disable all passwords that are enabled in the Security menu of BIOS.
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
-
Presario CQ61: Disable System KEY, HELP!
Help, please!
I have a HP Presario CQ61, I forgot the password of the BIOS, disable System KEY is: 69043204, can someone help me to unlock it? Thanks in advance!
Saul Martinez.
Please try: 76921820
Kind regards
KNRK
I work for HP -
system to address 0x3bc processes have just crashed, disabling required key
system to address 0x3bc processes have just crashed, disabling required key
pls send key deactivationHi FAISALAQEEL,
I recommend you contact the support team of activation for assistance on this issue.
For more information, see:
-
Please help - enter administrator password or power on password-system disable the key 76219396
Please help - enter administrator password or power on password-system disable the key 76219396
It is a presario cq61
Hello
Try to enter: 69171918
Kind regards
DP - K
-
XBR49X800D are there no option to disable the key tone?
XBR49X800D are there no option to disable the key tone? It is very annoying navigating around and hear tones every time I hit the buttons.
I have the XBR43X800D, but I think that the controls are the same. I turned off the annoying tone by changing its system to off. In the home menu, go to settings, sound then its system. This off my keytonw sound when navigating menus. I think that some applications may have their own sound tone so this may not work 100%.
-
I would like to disable a key Windows 7 from an old computer and install and reactivate on another
HTML Clipboard
Try the following:
Open a run window (Windows key + R), type slmgr.vbs - dli, and press ENTER to display the license information.
To release the product key to use elsewhere, use slmgr.vbs - upk. However, if you have a problem with the option of the PUK, look at this page http://support.microsoft.com/kb/947241 Vista
Click Start.
Starting the service will take a moment.
Try Windows Update again.If the recommendations above do not work, try the following:
Just format the computer that Windows 7 is installed and proceed to install it on the intended computer. You will need to use the phone activation to reactivate the license on the intended computer:
Activate Windows 7 manually:
1. click on start and in the search for box type: slui.exe 42. press enter on your keyboard
3. Select your country.
4. Select the telephone activation option and brace yourself for a real person.To format the computer where Windows 7 is installed now:
1. Insert the DVD of Windows 7
2. restart your computer
3. When asked if you want to boot from your DVD player, do it.
4. Select your language, click Next.
5. click on "repair your computer".
6. Select the operating system you want to repair.7. in the system recovery window, click command prompt
At the prompt, type FORMAT C:\
Press enter
Type Y for Yes
then press on enter again.
-
Power on password &; system disable the key... need fix number of entry
Presario C700 power on password, after three unsuccessful attempts get - system disable the key: 67653647. Please tell me how to get around and Turn off and if a BIOS upgrade will fix once I'm back at this PoS! Thank you very much!
Hello
Pleae try:
78731289
Kind regards.
-
Oracle 11g: problem with disable primary key
Hello
I have this problem:
I performed "EXECUTE IMMEDIATE"ALTER TABLE your table of KEY PRIMARY DISABLE";"
This operation returns an error
but when I did 'insert into table... ". »... Oracle returned ora-0001.
The operations are in the same stored procedure, so in the same session.
Database: Oracle 11.2.0.2
How is that possible?
All solutions?
Thanks in advance.
Best regards.
Alessandro ZenoniTry to add 'DROP INDEX' to your disable command.
not tested
alter table xy disable primary key drop index
-
Hi experts,
IM usnig forms 6i and I wanted to disable certain keys like F5, F7 and other keys, I went to Key - F7 trigger at the level of the form and I wrote the following code:
BEGIN
NULL;
END;
When I run form and press F7 it is still working... a way to disable the keys?
Thank youHello
Pls use NULL inside >
F6 - KEY-CREREC F7 - KEY-ENTQRY F8 - KEY-EXEQRY F9 - KEY-LISTVAL F10 - KEY-COMMIT
not key-f7, f8 key and triggers associated with etc at the level of the form pls...
I hope this helps...
Kind regards
Abdetu...
-
disable certain keys on the keyboard
Hello
I am trying to disable many keys in the film at any time can someone help me with this please.
Thank you
ISOon startMovie()
notWanted = "aeiouwy" - PERSONALIZE THIS SET OF CHARACTERS
the keyDownScript =.
"If" & QUOTE & notWanted & QUOTE & "contains the key then stopEvent.
end startMovie -
I want to truncate a table so I can import into it. But the table has a lot of foreign keys that refer to other tables. What is the best way to find and disable all keys referencing table?
This might work:
select 'alter table '||a.owner||'.'||a.table_name|| ' disable constraint '||a.constraint_name||';' from all_constraints a, all_constraints b where a.constraint_type = 'R' and a.r_constraint_name = b.constraint_name and a.r_owner = b.owner and b.table_name = 'TEMP';
-Andy
-
Tecra M2 parallel port disabled
I have a laptop series Tecra M2, which signals that it is run ACPI BIOS version 1.4
I have installed Kubuntu (previously 7.10 now 8.04). I'm unable to print via the parallel port. If I go into the bios port is shown as disabled I can activate, save a boot, and then I am able to print. The problem is, the next time I start the computer, the bios forgot I activated the parallel port and I can print is no longer.
As it is a bit of a pain to have to enter the bios, every time that I think I might want to print, does anyone know how to paste changes to bios?Since your laptop is a Toshiba BIOS on this subject, how you to leave? Just by pressing ESC?
If I remember correctly, you said the BIOS to save the settings, and it might be the HOME or END key. Don't know exactly, but for sure, you must save it explicit.Go and check it out.
-
Pavillion dv6: Sytem disable the key
Hi all
Put wrongly in my possword 3 times and have received a 'key to disable system' 68912132.
Help, please!
Try to enter
77670114
-
Lock screen keyboard shortcut disables the key 'l '?
Whenever I have use the windows key + 'L' to lock the computer. He keeps the key 'L' of work or because of sticking to the bottom and fill the thing entered password with characters 'L '. (good points, but I guess they are 'L'). Even when you use the keyboard on screen, the 'L' key does not work but each another key and I have even done a macro of 'L' key, but it does not work. Would probably not be a problem but my password contained an 'L' and by the looks of things, it would disable the L key regardless of whether I could sign it or not. Whenever I just restarted the computer which is quite annoying because I often use the locking function via the shortcut of privacy when I leave my PC, and I don't want to turn it back on it works when I pop off for 5 minutes or whatever. I am quite puzzled here, especially since the keyboard of the screen and stuff on do not work. Is there by chance a way to put even a button to close or lock the pc on the home screen as a tile? Because it would be just as quick and easy to use keyboard shortcut
Hello
Perform the following steps.
Note: In the following steps, the AppData folder is normally hidden. If you don't see the folder, select the view tab, click Folder Options. Click the view tab and select the records show hidden .
1. open Windows Explorer and navigate to the following folder.
C:\Users\your name\AppData\Roaming\Microsoft\Windows\Start start\program
2. right click in the folder of programs and select new/shortcut.
3. in the location box, copy / paste the following command.
Rundll32.exe user32.dll, LockWorkStation
4. click on Next, type lock for the name and click Finish.
Go to the splash screen, and you should see the shortcut Lock Tile that you can use to lock the computer.
You can also lock this shortcut to the taskbar if you wish.
Concerning
Maybe you are looking for
-
iMac 24 as a second monitor 2010 27 iMac?
An iMac 2006 24 can be used as a second monitor for my iMac 27 inches in 2010? I ask because I can get one for a great price.
-
Portege R100 - network controller driver
I just installed windows7 Enterprise version on this laptop and I have a Code 28 message in the status window of the network/device/general/controller management device. He cannot find a suitable driver. Of course, I'll need to install via a CD or th
-
Can I combine several old backups that are on a portable hard drive in just a backup with all the files, but no duplicates on the same hard drive?
-
Satellite L500 - lost wireless connection
My Satellite L500 recently lost the wireless connection. I looked towards the top of the Realtek wireless device in Device Manager and it says that the device is functioning properly. I tried to use "ping 192.168.1.1" join the router, and I get "erro
-
I have recived a message when you perform a chech PC saying this: pcdrsysinfoystemboard.p5x is missing. What is this average, how does influence my computer and there at - it an easy fix?