Tecra M7 - display will not be repeated after 10 minutes of inactivity

Similar Questions

• Satellite L555-10N screen will not shut down after 10 minutes of non-use

  Hello

  I recently acquired a laptop Satellite L555-10N, which so far has proved to be a good choice.
  I have a little problem, however:

  In the preferences of my energy, I put the time during which the screen should turn off, 10 minutes, if the laptop is not in use.
  Although this worked well for the last few days and weeks, the display now will be not closed at all.
  I did not change the BIOS or driver or whatever.

  I remember to change some preferences in the configuration ecoUtility to enable.
  At that time, I received a message that preferences should be modified to enable the functionality and I agreed.

  I could not notice any changes have been made, but from there, the screen off more.
  I would appreciate your help!

  Thank you!

  Hello

  What operating system you are using?
  For Vista and Windows 7, I founded a good article on Windows power management settings:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  In addition, you can change the settings for each profile. This means that you should choose turn it off the display function for this power profile that you use or all profiles, if I used all of them.

  Check this box!

• When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move...

  When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are

  (1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...

  what I've done

  I did a key recovery... even I am facing problem... Please tell me the steps to fix

  Original title: DESKTOP PROBLEM

  Hello

  Check with Lenovo support, their drivers and documentation online and ask in their forums
  on known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.

  =============================

  More troubleshooting if necessary:

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those with Dump in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Want K203TX: Display will not wake up

  This is a new laptop.

  I did nothing about it, other than updates of Windows install and create recovery discs.

  • I put the option "turn off the display of" 1 Minute.
  • IMPORTANT: I put the brightness screen completely to zero, the lowest setting possible, by using the keys on the keyboard or the brightness option in Windows.
  • Let the laptop computer idle for a minute, the screen can accommodate as it should (the laptop is put to sleep after 30 minutes, only display that sleeps, the laptop is still awake).
  • Move the mouse, press the keys on the keyboard, the screen doesn't come back to the top. The computer is still in place and in the course of execution-i can switch keyboard backlight On / Off with the keys, but the display will not wake up.
  • Press on the "brightness +" button on the keyboard, the screen wakes up. It is the only way to wake up. The other option is to press on and hold the power button, force a stop down and restart the computer.
  • This occurs ONLY when "brightess" is set to the lowest level. If the brightness is set to again one level above the lowest, the issue cannot be reproduced. Move the mouse or press any keyboard will wake up the screen in this situation.
  • The two graphics Intel HD 5500 and GTX 850 M drivers are up to date.
  • BIOS is updated as well.
  • Battery / sector makes a difference. If the display brightness to the lowest, the screen will ALWAYS fail to wake up, regardless of which power source is being used.

  What should I do? Please don't tell me this is a minor problem and I have to live with it.

  There are so many problems minor with this laptop, and all these add make a total piece of cr...

  My almost 5 years probook with a second generation core i3 processor and no discrete GPU is better than this all-new 5th generation core i7 + laptop GeForce GTX.

  I'm starting to regret this purchase. I should have gotten another probook. Thought that offers want a better "bang for the buck", and now I think it was a huge mistake.

  Anyway, no idea how I can get this fixed? Looks like a right driver problem? Or is this a hardware problem? Can we with a trial of mobile Envy this out and tell me if the problem can be reproduced on their platform? It cannot be reproduced on my Probook.

  Thank you.

  Hi @johnwinchester,

  I'm so glad to hear you're solves the problems you had! The key is that you are now without a problem.

  To answer 2 questions;

  1. to my knowledge, if you purchased the HP 3 year extended warranty on the spot with a cover against accidental damage, then it usually starts from the date of purchase. Be sure and check out I would suggest either go this site check your product warranty and/or contact us.

  2. I'd say creating new recovery disks. The old drive will not help to you on your product. You have the ability to create new disks of recovery of the product without any reported problems. I wouldn't take the chance, I just came out with the old and turned to the future.

  I hope this has helped!

  Have a great day!

• Windows Vista will not be validated after clean install

  Windows key, title: product original vesta H P,.

  buy windows key, product vesta p h, it will not be validated after a clean installation, only to discover, to upgrade only, that cost me $ 160 in two, three years ago, can aney help, how to fix this, davie.

  Hi David,

  Install and activate the original operating system provided with the computer first (I guess it's XP).

  Update to upgrade to Vista, then use the Vista product key that you used at the time to update (because it works now as you WILL upgrade and do not try to install only a facility full after an installed clean).

  Good luck!

  Kosh

• iTunes will not open even after reinstall on windows 7

  iTunes will not open even after reinstall on windows 7

  Hello mamaKAT,.

  Read the Apple article listed here:
  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.
  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Every time I start up the Visual display will not.

  Original title: Aero

  every time I start up the Visual display will not.  I have to adjust from the start menu.

  I use a portable G6 pavilion. The screen is set at 1360 x 768 256 colors 60 hertz.
  He only did this recently.
  Any answers please.

  every time I start up the Visual display will not.

  Hello

  What exactly on your screen going bad?

  In the meantime try reinstalling the latest graphics drivers for the computer. Find them in the HP website.

• I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just does

  I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just doesn't let me activate it. Can you help me?

  If you're referring at the origin of Creative Suite (CS1) then this activation server was closed by Adobe a few years ago.

  The only way to re - install now is to download a new version without activation for CS2 (also applies to CS1 owners).

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Install, then enter the new, without activation serial number provided at this link (column next to the download link). Your existing serial number no longer works.

• I put my screen saver to turn on after 1 minute of inactivity. It does not

  I put my screen saver to turn on after 1 minute of inactivity. He does not. I followed the instructions for the Dell Studio PC monitor owner, without success (i.e. type msconfig in the search field, etc.). Could it have something to do with the type of computer that I use (IT ' has an ASUS K52F series)?

  It would be useful to know what checks you did already [especially because your reference in msconfig means you did not hurt already].

  I assume you have checked the installation was properly completed and everything on the monitor & PC are in agreement.  I suppose also that you have checked the monitor & display settings in the display panel and checked power options.

  Check the entries in the Manager of devices for all the warnings, and then try to update drivers - particularly the card video than the one responsible for many problems of power management driver.

  Run the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  then run both the troubleshooters maintenance & Control Panel Performance, troubleshooting.

  If the settings you put in do not appear in the advanced power management options so watch this one then

  When you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel

  If this does not help then run the System File Checker to repair corrupted in Win7 files
  http://support.Microsoft.com/kb/929833 there is additional guidance on this subject in sfc.exe/scannow

  Finally, check your hardware compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx

  Good luck

• How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  i mac OSX10-9-5 2015.   How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?

  TT2

• AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING

  AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING

  AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING

  Hello

  Click on desktop and select Customize.

  Click the screen saver icon on the bottom of the window.

  In the window of the screensaver, remove the check mark from the résumé shows the lock screen.

  Click Apply/OK.

  Explanation:

  Even if a screen saver is not enabled if you select the summary option, the system will automatically display the lock screen when the idle time is reached.

  Concerning

• Windows auto-serrures after 10 minutes of inactivity.

  Can someone help me solve this problem? Windows Vista sends me back the connection after 10 minutes of inactivity screen, which becomes inconvenient when there is 5 to 10 times a day. First of all, it is NOT related to the screen saver, I have the "on RESUME, display login" unchecked, as well as my screen saver is disabled. It is also not related to the option to sleep in the advanced power settings, I have my computer never sleep. Vista is not sleep, hibernation, Logging Off ot, it is blocking. Basically it's just to send me back the login screen after 10 minutes of inactivity, and when I log in all my stuff is still there. Web pages or applications I had open are all still there, but it's always a pain the the _ because if I have any program configured to run automatically (as virus scans etc.) in the middle of the night programs start if the system is locked.

  I searched online for a while and could not find any help. It seems that everyone who has this problem just gets told to check their settings to screen saver and power, but this problem is not related to those.

  Hey Nick,

  This is sometimes possible when you computer from the fan or the computer gets hot. Go to BIOS and enable two fans cause by default only one fan is turned on.

  Let me know it works...

  DOM.

• Satellite X 200 freezes after 15 minutes of inactivity

  I'm tired of this problem: my laptop freezes after 15 minutes of inactivity and I can get it going again to reset. The problem was solved when I reinstall Vista, but after several months my laptop started hanging up. And my laptop is unable to install Tempro 2.0.3.

  Please, help me to solve this problem and I don't want to reinstall Vista again.

  Hello

  For me it sounds like that a 3rd party software application or is causing this problem because you wrote that after Vista reinstall, the problem has been resolved.

  I put t know this software you have installed, but you need to remove all unnecessary applications as shareware or trial versions.
  Then use CCleaner to clean the registry.
  Visit the Windows update website and install all the updates that are available for your Windows.

  In the worst case, you will need to reinstall Vista again. In my opinion a reinstall from time to time is normal and I have reinstall my laptop every year. So I often have good performance.

• my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

  my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

  Hi paulbartolotta,

  Welcome to the Microsoft community. According to the description of the problem, the keyboard and the mouse gel. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the keyboard and mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try to use the mouse/keyboard to a different USB port and verify.

  Method 3: Try using the mouse/keyboard on a different computer.

  Method 4: Update the latest drivers/software for the mouse/keyboard.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with windows.

• my computer disconnects me after 3 minutes of inactivity. P6310y model number

  My computer disconnects me after 3 minutes of inactivity. Model p6310y model numbert

  Hello

  Open windows control panel. Open preferences, click on screen saver link at the bottom right, and in the next window, uncheck the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change.

  Kind regards

  DP - K