Tecra S1: lines horizontal and vertical video (LCD and LCD desktop)

Similar Questions

• my monitor displays properly, the blue and yellow lines horizontally and vertically on the screen

  monitor the display that is not right, when you move the slider it filled with blue, there are blue lines across screen

  Hello

  1 did you changes to the computer before the show?

  2. the make and model of the computer/monitor?

  Note: Make sure that the cables are connected properly to the screen and try replacing the monitor cable and/or monitor itself.

  Method 1:
  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960

  Method 2: Uninstall and reinstall the display drivers and see if that helps.
  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the graphics card, right click on the map
  (d) click on uninstall
  (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

• Photosmart 6510: lines horizontal and top and bottom of page when scanning

  Hello

  Scans of the bucket of my Photosmart HP 6510 leave a horizontal line at the top and bottom of the page.

  I tried to adjust every page that I scan to align as straight as possible on the glass and this sometimes helps a bit.

  I am able to bypass the lines in culture to, but would prefer to find a real solution.

  Any help would be appreciated because I don't know a lot about the scanners, thanks!

  I've included a sample page below (the mark on the right side is not dirty glass, it has been a staple in the page):

  

  Welcome to the HP community @lgilb01,

  I wanted to tender hand to respond to your message on the lines that you notice when you scan to scan in your Photosmart 6510 bed. It seems to me that there could be some light enter when performing the analysis, causing lines. If you are only scanning one page at a time, the lines should not appear as they are now.

  Here is a troubleshooting guide for you to try. If the lines do not fade, contact HP directly to see about a replacement printer.

  HP Photosmart 5510, 6510 and 7510 e - all-in - One Printer Series - vertical stripes, lines or scratches in Copies or scans

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope I helped!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• AI CC, horizontal and vertical guide lines disappear when aligning

  Hello

  I think I'm exactly as shown. I work with the rules and guidelines. My goal is to start from the upper left corner of the document (white Virgin) and drag the horizontal and vertical guidelines at the same time. Then I press Ctrl + R to hide the ruler guides, use the black arrow to select the guides that intersect (they turn blue), and align the center of vertical positioning. They should then be centered horizontally and vertically, but they disappear completely. I rebooted HAVE him, but that did not help. Kindly help, if I'm having trouble with this... Geez!

  Thanks in advance,

  Janice

  I experienced this with someone a few months ago, and we understand that they are no longer work as expected. After that you align the guides by following the steps you sketched out, zoom all the way (control-) until you can see the full editing table. They are way out of your sight.

  As an alternative, until it works again, note the height and width of the artboard and divide by 2. Use the numbers that result to position the guides manually.

• can be turned a video clip.  I want to change my cell phone video that export horizontally and I need to rotate vertically.

  Can I turn a video clip from horizontal to vertical?

  Yes:

  Adobe Premiere Elements help. Reposition, scale, or do rotate clipswith the motion effect

• Horizontal and Vertical alignment / webcamSub

  How to control the alignment, horizontal and vertical of users within the webcamSub?

  Here is the result with the old and the new ACC webcamSub.

  

  

  Thank you

  Bernard

  Hi Bernard,.

  Sorry fot the inconvenience - part of the webcamsubscriber, we made a few changes to the layout system, in order to make them easier to control. So it is perhaps not as good in guessing the page layout that you want to automatically, but you will be much more easily able to force them to do exactly what you want.

  Here is the new property added to webcamSubscriber:

  usersPerRow:int[read-write]

  
  

  Specifies the number of the user to display per line in the webcamsubscriber videos. Once the number of videos to display exceeds this number, a new line is created with videos of excess. By default, 4. For a horizontal long band, this game at a high number - to a vertical strip, put on a low number.

  For your case, simply set usersPerRow to 1, so this will lay vertically.

  hope that helps,

  Nigel

• changing video of layou horizontal to vertical arrangement

  I have several xxx.mov files but when I play them they are horizontal and I want to correct what the video is vertical as it should be. I was sent these files so I do not have access to the originals.

  Can someone help me?

  The free VLC Media Player can shoot videos for
  Watch one.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  After installing VLC open an it... then video and pause go to...
  Tools / effects and filters / video effects tab / geometry tab.
  Select the check box turn / slide the circle / close / play.

  If you want to rotate the .mov files permanently... full details
  Apple Quicktime Pro version may be worth a visit:

  Also you can try to convert the. MOV file to the. WMV format
  and then you could rotate the video using Windows Movie Maker.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.filehippo.com/download_super/
  (Windows XP / Vista / 7)

  (3) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (4) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (5) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Movie Maker - how to rotate a video taken from the Angle easily - XP - Vista
  http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

• How can I change an imported video horizontal to vertical?

  How can I change a horizontal vertical video in windows media player?

  Right-click on the file and click Open with,

  Click on Windows Movie maker,

  Which you can click on the rotation, upstairs at the Center and record is at the top right.

• Both horizontal and vertical tabular of freezing...

  Hello

  I use Apex version 4.2.6... In table form, I need to freeze the column headings (horizontal gel) as well as the lines of the columns (vertical gel),

  I tried for vertical gel well come... But I don't know about header freeze... is it possible to freeze both in tabular form? If Yes, then please guide throw me it

  Thank you

  Infantraj.A
  

  Hi Infantraj,

  Infantraj wrote:

  I use Apex version 4.2.6... In table form, I need to freeze the column headings (horizontal gel) as well as the lines of the columns (vertical gel),

  I tried for vertical gel well come... But I don't know about header freeze... is it possible to freeze both in tabular form? If Yes, then please guide throw me it

  Here is the post from blog by Jari wool, where he showed both freeze headers and freeze columns in the classic report:

  http://jaris.blogsite.org/Apex/f?p=blog:read:0:article:303800346302715

  Just download the sample application provided by Jari, upload it to your environment and use it to tabular form (as classic and as a report for the most use of the same model, i.e. the Standard). You can see the working example as well.

  Years ago, I did both the horizontal and vertical gel by twisting Jari earlier blog post.

  Reference: Re: how to freeze report tabuar headers and forms in APEX 4.1

  I hope this helps!

  Kind regards

  Kiran

• Text in centered DIV horizontally and vertically.

  I made a bar of simple navigation at the bottom of a site that I am building and had it centered horizontally and vertically.  When I pulled the top of the page now the text is completely to the left and I had no problem with him the day before. I made no changes to the code. I use IE9, but I've been since I started this site. Everything looks fine in Firefox. If I approached IE9 compatibility mode, it is centered horizontally but not vertically. Any ideas?

  http://www.toddsshowcase.com/

  http://www.toddsshowcase.com/styles/stylesheet.CSS

  Just add height: 90px; and line-height: 90px; to your 'bottom_menu' of the selector css (as shown below)

  {#bottom_menu}
  text-align: center;
  Width: 974px;
  margin: 0px auto;
  Clear: both;
  height: 90px;
  line-height: 90px;
  }

  Normally, I would not recommend the definition of a height on a

  that contains text, BUT in this case there are many possibilities be accommodated the text should zoom to the end user in two or three times.

• How can I fix the screen because everything is horizontal and not vertical poster?

  How can I fix the screen because everything is horizontal and not vertical poster?

  Hello

  Please tr

  1. Press and hold Ctrl + Al bot
  2. Press the enemy (left or right because I do not know what sense on your screen)

  Hope this helps

• How to get the angles of view (horizontal and vertical) camera?

  How to get the angles of view (horizontal and vertical) camera?

  The horizontal and vertical field of VIEW properties are available with the camera_get_physical_property() function.

  Who is using the C API of the photo. I don't think that you can access by using the control of the camera of Cascades.

• How to enable vertical and horizontal scrolling with sculpt Touch Mouse (W7-64). When I activate horizontal disables vertical scrolling to scroll.

  Load the IntelliPoint software that is more recent, although she did not recover that (!). Scrolling works when you use the Synaptics Touchpad.

  When I turn on all the other functions in the IntelliPoint vertical scrolling is disabled.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
  The description of the question, I understand that you can not use horizontal and vertical scrolling with sculpt the touch mouse.
  Let me go ahead and help you with the issue.
   
  As you have been told that the IntelliPoint software is updated, but sometimes Sculpt mouse drivers may be outdated which causes this problem.
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  I suggest for the link and follow the steps in the article:
  Install IntelliPoint software and the mouse
  http://support.Microsoft.com/kb/258785#top
   
  Method 2:
  Download and install the drivers from the link:
  http://www.Microsoft.com/hardware/en-in/d/sculpt-touch-mouse
   
  See also:
  http://www.Microsoft.com/hardware/en-in/help/support/how-to/mouse/use-sculpt-touch-mouse
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• [SOLVED] Headers of columns (horizontal and vertical) Center

  Hello.

  I use JDeveloper 11.1.1.7.0

  I need to center headers of columns (horizontal and vertical), a < af:column... > classic within a < af:table >

  It is very important that one header is centered. The content could be left, Center or right-aligned.

  I tried this solution to another thread (alignment of the column header in the table of the ADF in the Center), but it does not work:

  <f:facet name="header">
      <afh:rowLayout>
          <afh:cellFormat halign="center">
              <af:outputText value="column header"/>
          </afh:cellFormat>
      </afh:rowLayout>
  </f:facet>
  
  

  Any suggestion? Thank you

  The solution is for JDev10g.

  Have you tried the alternative

  Set the align of af: column in the Center, it aligns the header and the data at the same time in the Center, if you only want the header to the Center, the inlineStyle value ' text-align: left;' in addition to the align property

  Timo