Tecra S11 does not recognize the Art store

Similar Questions

• Re: Win XP does not recognize the art Store 1TeraByte external HARD disk

  my xp does not recognize the art Store 1TeraByte external HARD disk.
  In the past he woked fine.

  I tried to connect it to another computer with XP and it works very well.

  If I understand well there is no driver to download for this disc. It is plug ' don't play.

  There is no massage.
  other devices that I connect to USB also works very well,

  Thanks for your help.
  Eitan.

  Hello.

  You tired to update the chipset drivers?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Tecra 8200 does not recognize the RAM in Slot B

  Since a few days my Tecra does not recognize the RAM Module in Slot B. Before everything was fine. I have 2x256MB Modules. I was wondering why my Tecra becomes slower, the last days, and then I saw that I have now only 256 MB of RAM. I have change the slot Modules A to B. I checked also the two modules of RAM with MEMCheck. Both are ok! Just at the moment where I put a RAM for Slot B and none in slot A my Tecra won't start! If I insert the two module my Tecra boots but with just 256 MB of RAM.

  Is there another solution then buying a new laptop? Is my Mainbord damaged?

  I was so contently with my Tecra ;-) so far

  The slot B is probably defective. Only solution for me is to buy compatible 512 MB module and use it in A slot. According to specification for laptop, your device can handle with max 512 MB of RAM.

• Tecra M1 does not recognize the DVD drive after replacement

  I am trying to install a new drive CD-RW/DVD-RW on a Tecra M1; However, when the computer does not recognize the drive.

  Is there a solution to this?

  Thank you

  Colin

  For me it s case.
  I would say that the BIOS can't handle the new player properly because of the wrong master/slave/c-salt settings
  Readers slim for computers laptops support setting master/slave/c-salt settings and these settings can only be changed by changing the rider as on desktop drives.
  So it is very important that you purchase a compatible player and supported because disks with incorrect settings will not work.

  Before buying a car, you should ask the service provider to Toshiba for a caught player supported and compatible

• Tecra M9 does not recognize the SDHC 4 GB

  Tecra M9, Windows XP

  The internal card reader does not recognize the SDHC 4 GB (provider: "extreme memory"), being inserted in camera or PNA not connected via USB, no problem to read or write to the card.
  No idea how to get the card to work with this card reader?

  Hello

  I have an idea.
  I think that the SDHC 4 GB card is not recognized because a Microsoft patch is not installed on your XP operating system.

  Microsoft has released this document which should help you to solve this problem:

  [Hotfix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards | http://support.microsoft.com/kb/934428]

  Good bye

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• Tecra S5 does not recognize the SDHC 4 GB micro card

  Hello.

  I have a 4 GB microcard SDHC and the reader of my laptop does not recognize the card...

  Help.

  GR Arno

  Hello

  Are you sure that this laptop supports this type of card?

  As far as I know THAT these cards are compatible:

  Card SD - 8 MB - 2 GB
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  Only the SDHC card and not SDHC micro card is supported

  Concerning

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• MacBook 2006 does not recognize the Canvio Stor.e

  Hello world!

  I bought this external HDD Stor.e Canvio (2 TB usb2/3),
  The problem is that it only appears not on the macbook in 2006 (2 GB ram 2 GHz c2d OSX 10.4) I bought it for.

  But:
  The HARD drive is perfectly recognized by my macbook pro.
  Other external hard drives are recognized by the macbook (2006), no problem here (even usb powered works of readers, the canvio has its own power plug). The canvio is formatted in Mac OS.

  Clearly, I do not understand the problem, it should work.
  And the 2006 is compatible if I read the news of the canvio box.

  No idea how to run is more than welcome.

  Thank you!

  PS: latest news, the canvio appeared on the 2006 once or twice, but I don't know what was 'different' these times.

  Hello

  First of all it s not the HARD problem because this HARD disk drive works fine in the other computer (Macbook).

  This HARD drive supports the USB 3.0 standard but it s compatible with the USB 2.0 standard.
  The point is that the USB 3.0 offers 900mA. The USB 2.0 port common supports only 500mA.

  I think the problem is the low power supplied by Macbook s USB port. In this case, you must use a USB Y cable in order to connect the HARD drive to 2 USB 2.0 ports.

  Not sure if it will really solve your problem, but I think that this should be verified

• Tecra M9 - does not recognize the 320 GB HARD drive

  Hello @ all,

  I tried to install the HARD drive, but it seems to be not recognized by the BIOS. Any chance to get this problem resolved?
  With Acronis Disk Man. I get an error message: No. HDD installed!
  BIOS version is 1.80, HARD drive is a Seagate ST9320421ASG (Momentus 7200.3 320).

  Thanks in advance

  Hello!

  Have you tested the HARD drive in a laptop or in an external enclosure? Maybe it s faulty.
  Or you test another HARD drive in this notebook.

  Normally a 320 should work in Tecra M9.
  There is a new version of the BIOS on the Toshiba, but I doubt that the problem of the article, but try to update.

  Good bye

• Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

  I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

  My laptop is a Qosmio F60

  This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
  According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

  Some other HDD is recognized correctly?
  What you can try is to reinstall the chipset driver, restart the laptop and test it again.

  Since when you have this problem? Some installed updates of the last days?

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

  I uninstalled flash on my mac now youtube videos will not play.

  the error says safari does not recognize the video formats available.

  Reinstall the Flash Player... Why did you remove it?

  Barry