Tecra S11 - webcam application failed to initialize

Similar Questions

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• How solve this error message application failed to initialize properly 0xc0000005 on start up

  Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message

  (application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!

  Hello

  You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.

  (a) use the Recovery Console, which is described in the article below.
  http://support.Microsoft.com/kb/314058

  Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,

  (b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
  Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dll

  Note: Where d: is the CD-ROM drive

  (c) then type EXIT and when the pc reboots, you should be able to boot XP.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "ibrytdesktop.exe. the application failed to initialize properly (0xc0000135)" when the computer is turned on.

  Original title: need help please

  Ive had an application error, ibrytdesktop.exe. Note ISC, the application failed to initialize properly (0xc0000135), click ok to close the application. Can this happens whenever the computer is on how I fix

  Hi petrospapamihelakis,

  Looks like one of the installed program on the computer has been corrupted.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you get the error.

  Step 2: If he is able to start very well without any errors, and then try to try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

• Reinstallation of Windows Media Center XP error, the application failed to initialize properly (0xc000135

  I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:

  PxShare.exe Application error.

  The application failed to initialize properly (0xc000135).  Click OK to close the application.

  It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.

  I don't know if the two problems are related or not.

  Thanks for any help!

  Hi Lowery619,

  (a) If you have external devices unnecessary connected to the machine, unplug them.

  (b) thereafter, you can try reinstalling Windows XP.

  For more information, please visit this link: install, reinstall, or uninstall Windows

  Install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• If I update to windows 7 it will fix error application failed to initialize properly?

  When I try to open certain programs I get application failed to initialize properly.

  I want to know if I upgrade from Windows Vista to Windows 7 will be the mistake still be there?

  Will he take it?

  Thank you

  Mildred W.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  3. What is the full error message?

  4. what programs you try to run?

  If you upgrade Windows Vista to Windows 7, once again depends on what program you use. If there is a problem with this program, you could get the same question.

  If these programs are third-party programs, so I suggest to uninstall and reinstall once and check to see if the same problem happens.

  Alternatively, you can also try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Defender of Windows Application failed to initialize x 0 80070006. The handle is not valid.

  When I connect to my pc the "Windows defender Application failed to initialize x 0 80070006. The handle is invalid. "appears.
  And then when I go into my control panel and open Windows Defender is the same thing.
  How can I stop this?
  Thank you

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Qosmio F60/00Y15. Webcam application fails to launch

  Hello

  I have a laptop "Qosmio F60/00Y15" camera app fails to initialize.
  61 drivers on my computer are up to date.

  The camera on my lapyop version is V2.0.0.19.

  Can someone help me to get the camera to work?

  thnx

  Hello

  Have you tried to reinstall the webcam app?
  Do this! Firstly uninstall the webcam software. Restart the computer and reinstall the software of the webcam.

  You don't know where to find this software?
  Well, you can find this package or on page pilot European Toshiba or the Australian Toshiba page.

  http://EU.computers.Toshiba-Europe.com
  http://www.MyToshiba.com.au/

  Both pages should provide the same software of the webcam.

  I think that the new facility should help sortout this question.

• Error when you try to open Internet Explorer 8: the application failed to initialize properly (0xc0000005)

  IExplorer 8 causes error "the application could not initialize properly (0xc0000005)."

  Hello

  I use Windows XP and make regular updates. I use a firewall, Windows Defender, virusprotection, etc and I don't surf _ or download strange apps.

  Whenever I try to open 8 IExplorer, it gives me an error "the application could not initialize properly (0xc0000005)."

  Any ideas how I can fix explore?

  You use XP, but post in a forum of Vista, and Internet Explorer has an own forum. Please ask here.

  Internet Explorer Forum
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The application failed to initialize properly (0xc000001d)

  My name is Daniel and I had problems with windows 7 and had to reinstall. I formatted the hard drive and after reinstalling windows, I started to download the Photoshop, After Effects and Premiere Pro compared to the Creative clouds... After installing these programs, when I try to open these programs they do not open. Opens an error message... "The application could not initialize properly (0xc000001d). Click OK to close the application. "What I'm doing? Someone help me pelase. I have a card mother Gigabyte Z97X-UD3H-BK, Intel Core i7-4790 CPU @ 3.60 GHz, NVIDIA GeForce GTX 680, 16 GB of RAM and Windows 7 Ultimate x 64.

  Hi Daniel,.

  Could you please check and verify if you have Windows 7 Service Pack 1 installed or not?

  Please post the log of errors.

  ~ UL

• Problem with opening of Windows Update - "application failed to initialize (0xc0000005) property.

  I can't open "Windows Update" - it will momentarily Flash on the screen, then disappears.  When I start my computer (Vista) I also get an error message 'property initialization failed (0xc0000005) - don't know not if associated with Windows Update not opening

  I can't open "Windows Update" - it will momentarily Flash on the screen, then disappears.  When I start my computer (Vista) I also get an error message 'property initialization failed (0xc0000005) - don't know not if associated with Windows Update not opening

  Error could be caused by a virus/malware, programs or simply corrupted system files.

  Search for malware: http://www.microsoft.com/security/pc-security/malware-remove.aspx

  or http://www.microsoft.com/security/pc-security/scans-and-software.aspx

  To check if it is a program:

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  To fix corrupted - files

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228

  For the WU issue:

  Suggestions-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

• When I open windows defender, I get this error that says 'application failed to initialize the 0 x 80070006 handle is valid' can you help me?

  Yes just like the title says I have a few errors on my laptop.

  1 WINDOWS DEFENDER ERROR indicating that the initialization failed 0 x 80070006 handle is valid.
  2. THE REPAIR ERROR 42060
  WINDOWS 32:MALWARE - GEN 3
  4 WINDOWS DNS CHANGER VJ [Trj]

  Hello

  Method 1:
  Some malware may also be responsible for this behavior, you need to be as sure as possible that your machine is not infected
  You can perform a Microsoft Security Scanner and check if the virus is completely removed. Check out the link below to run the scan and check if this helps-
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  
  Method 2:
  You can also check out the link and check:
  Error message when you try to start Windows Defender on a computer that have recently upgraded you to Windows Vista: "initialization failed".
  http://support.Microsoft.com/default.aspx?kbid=935511

• The application failed to initialize properly (0xc000005)

  When I run some applications (I guess point net apps) they come with this error in the application. This error appears when I run my Visual Studio project (when I run debug file). It still happens if I create a new project. This affects several applications. The event type is a popup of the application and the number is 26. It is related to this error I get when running applications on VB2008 "could not load file or assembly 'Project name' or one of its dependencies, the specified module could not be found. Boot in safe mode always comes up with the error.

  I can't find a solution to this problem. Apparently, it happened when I ran a particular application or something else of editing the registry. Any help would be greatly appreciated!

  Hi Gruntkillerl,

  Welcome to the Microsoft community.

  The question you posted would be better suited in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Please help me: I get message "application failed to initialize properly 0xc0150002 error code", when trying to open the trial of Sony Vegas 8.

  Windows XP

  Hello Jamie-94,

  Thanks for posting on the Microsoft answers Forum.

  It looks like something has become corrupted when you tried to install or open your application.
  I want to uninstall the application first.
  Make sure that all the files/folders related to Sony Vegas 8 trial have been removed. This includes My Documents.

  If the file is a .msi, you can use the Microsoft Installer Cleanup utility.
  Click here to download it. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Otherwise, try to install it again and see if you get the same error.
  If still problem, I suggest you post your question in the Forum Sony listed here.

  Hope this help to solve your problem. Please answer if you still need help.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Application failed to initialize 0xc0000142

  About 2 months ago I had service pack 2 installed on my computer. Everything was working fine until about a month. When I try to open Microsoft Office Powerpoint and Excel, I get an Application error message. But I can't open and use Mircrosoft Word without any problem. I also have an Application error message when I try to use Windows Media Player, iTunes, Microsoft Sliverlight, reader DVD Toshiba and Mozilla Firefox. But I am able to use Internet Explorer very well. When you try to download adobe flash player I get the message: getPlus + (R): error, error operating system! I also get errors of Setup.exe and Plugin. When I tried to uninstall Mozilla, I got a message saying that the program may have already be uninstalled. I searched all over the internet for solutions and none worked!

  Hello

  Step 1:

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  Once the analysis is complete, restart the uninstall from the computer and re - install the applications that are the problem.

  To uninstall programs follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstall an application only if you have the media to re - install.

  In addition, run a virus scan to check if there are any infections on your computer.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.