Telephone charges too quickly and die as fast
In the course of the last month and a half, my phone charges jumps every time that its on the charger. It's going to be 28% and as soon as I put it on the charger it goes to 40% and if I take off it will refuse slowly over the next few minutes to a still smaller percentage. Even if I load it 100%, disable or reset, this will continue to happen. I bought a new charger for Sprint ($15 so it worked better) but who did not help in any way.
Check your battery recharge Cycles, if the numbers are bad, better to go for a new battery
Tags: iPhone
Similar Questions
-
Why is my iPhone 5s overheat quickly and lose battery fast?
My grandmother recently gave me his iphone 5 s when she got a new, but I noticed it's hot so easily, it really hurts to the touch. and the battery goes down so fast, I was 100% and 6 minutes later, I was 83%, and I was just on the application of the parameters. No one knows how to fix?
First of all, set factory settings back without using any 3rd party backup apps or 3rd later. Manually configure personal data, and the life of the battery to test.
If the iPhone is not yet too hot, let the phone tested by Apple or an Apple, the problem authorized Service provider may be material related in this case.
Find an Apple authorized service provider
The battery has been replaced in the past?
-
my pc goes to sleep too quickly, and keep having to log into windows
I connect Windows, and after the Panel if I don't stay active with ex activity; the mouse, internet, windows etc goes back to the lock screen and I have to sign again after one minute of inactivity. I want to keep the lockscreen, but tired of him going to sleep so fast. What should I do?
Hello
Right-click on an empty area of the desktop and select Personalize. Click the link to screensaver at the bottom right. In the next window, you can adjust the time until the screensaver kicks in the menu dropdown "wait." If you do not want to have to connect after that, also Remove the tick in the box next to "in»the logon screen curriculum vitae Click on apply, then Ok to save the change of the parameter.
Kind regards
DP - K
-
Redirection to allow appears and disappears too quickly click on.
I have Firefox installed 36.0.1 and type the URL I want it flashes the blocked redirect and allow so fast, I can't click on it. Then he evokes Qwest so useful URL search page. I disabled the "Ask before redirection" setting, even enabled the topic: config parameter. The URL appears in my nslookup, but my IE or Firefox can bring to the top of the web page. I go to wordpress to build a site that I registered.
Many of these search ISP 'useful' pages have a small link somewhere to give them so that Firefox gets a normal 'page not found' result instead of going to the search page. If you can't find it might help to reduce the scale of this problem.
If you have a Qwest toolbar, there is a setting in the toolbar to withdraw. If the toolbar is not a visible settings button, you can try the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Find the toolbar on the right, and then look for an option button. Or maybe the button disable is more appropriate in this case.
-
I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly. It never happened until this update. How to fix this problem?
Hello kellyfromrexford,
I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s. To determine what application or process affect the life of your battery, take a look at the information in these resources:
On the use of the battery on your iPhone, iPad and iPod touch
Maximize the life of the battery and battery life
Take care.
-
Drop-down menu CSS disappears too quickly
Hello
This may sound like a picky question, but my customer asked if I could do something. In any case, I made a menu CSS dropdown on the following site: http://www.southernprairierailway.com/
There is decline in the bottom under the tabs 'About', 'All' on board and «Ogema heritage...» ». You should notice that if you hover over the menu and move your mouse down too fast, the menu disappears. Is there anything I can do about it?
Thank you!
The subnav closes too quickly because you have a small space between the top-level link and the
- submenu so the mouse detects his flakes subnav and firm.
Change the top to 38px position on the "selector css navbar ul ul (as shown below):"
#navbar ul ul {}
position: absolute;
visibility: hidden;
top: 38px;
}
-
Satellite R630-155 - fan is too loud and SSD update
I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:
1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...
2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!
3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.
Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.
Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?
To follow...
Hey Buddy,
With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversBut before you start the update of the BIOS, you should consider the following tips:
-Run update as an administrator only
-Unzip all files from zip archive before launching the update file
-Close all running programs as the antivirus and firewall
-Make sure the battery is fully chargedWith regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.
All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)
-
WinXP bluescreens on startup, disappears too quickly to read
HP Pavilion dv2000, WinXP, restarts constantly, blue screens, but the blue screen disappears too quickly to read. Is it possible to get this blue screen to see more?
I could solve this problem by starting with a mini version of WinXP and repair start-up files.
Thank you!
-
I'm unable to determine the correct HP Quick Web access to fast Internet security key
I am unable to determine the correct HP Quick Web access to fast Internet security key?
Hello
You need to contact HP support, their documentation online and ask in their forums than
is not a problem of Windows or Microsoft.These should help:
Install and use the Applications HP QuickWeb
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02043846&cc=us&LC=en&DLC=enSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My battery is currently not defined charges to 80% and it is constantly in charge up to 100%. I want to free up to 80%. How can I change this? my laptop is Sony Vaio.
Hello
Why do you do this? Most recent type lithum batteries must be fully charged that Sony has
implemented.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport====================================================================
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With
systems today, the premiums is not a problem.
Here are some tips to help and troubleshoot battery issues.Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Try this - to make a Restore Point
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
RESTART which will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Quick and easy way to change the SID of ORACLE EBS
Hello
I was wondering if it is somehow fast and quick change SID of Oracle EBS databases and Application layer?
9i database
EBS 11.5.x
OS = Unix flavor (Redhat Linux / AIX)
Thank you981553 wrote:
HelloI was wondering if there anyway quick and fast change SID of Oracle EBS on two layer of database & Application?
9i database
EBS 11.5.x
OS = Unix flavor (Redhat Linux / AIX)Thank you
The way simplest would be using quick Clone - run preclone on the database/application, stop the application/database, run post clone on demand database and change the SID.
Documentation fund quick Clone version 11i and 12 [799735.1 ID]
Cloning Oracle Applications Release 11i with rapid Clone [ID 230672.1]Thank you
Hussein -
Size of the table space increases too quickly (DEV_MDS of soa suite 11g)
I use Oracle 11g SOASuite.
We are facing a problem of database (table space). After each schema deployment that dev_mds increases of 40 MB. We are therefore very often our processes in the development stage. and while cancellation of the deployment of the process. Ideally the memory should be freed. but it's not free memory.
Please, help me out of this problem. and it will be appreciated if someone will explain how this schema size increases too quickly.
Thank youWhenever you cancel the deployment a composite of a partition in the composite EM console gets also deleted from the MDS store. But since you must keep all versions of your composite, that your MDS store is bound to grow with each deployment.
As you mentioned that your size of the composite is huge due to activity of embedded java, it's something that your design should be avoided because there is no resuability for your component java embedded in several versions of the same composite or composite.
If you are wanting to use Java in your BPEL process I recommend to use a resalable composite with a context of spring that you can reference from different composite materials or different versions of the same composite.
It also gives you an advantage in terms of modularisation your application, because whenever you need to change your composite Java or BPEL, they can be changed and deployed independently.
-
36 Firefox changes on ALL too bright and saturated colors.
Now I have 28, 33 and 36. All previous versions were the same and more accurate color. But, 36 makes all too bright and saturated. All pages. Even the icons of bookmark. Everything.
Something has changed. Could have changed at 34 or 35, I skipped those. but here in 36 is definitely a problem.
There is a new parameter, that I missed?
Appreciate your answers. It's hard to see.
~ Bob
You can attach a screenshot?
- http://en.Wikipedia.org/wiki/screenshot
- https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
- Use a type of compressed as PNG or JPG image to save the screenshot
- Make sure you do not exceed the maximum size of 1 MB
This may be due to a problem with the profile for your monitor screen colors or color profiles embedded in images.
Try disabling color management to test whether it is caused by a problem with color management.
You can set the pref gfx.color_management.mode to 0 on the topic: configuration page to disable color management.
You have to close and restart Firefox for the changes to take effect.
See: -
Cannot change rules in Mail because the window is too short and not resizable
When I create or edit a rule in the mail, the window is always too short, and it cuts the Actions section. I had this problem for a while, but there is a small bit visible (the wick down the line) and I could click to edit it, but now there's nothing I can click at all, that keeps me completely from the use of the rule. How can I fix or work around this problem?
In the past, restarting Mail would bring this window to its full size. If this does not work for you, try this:
Exit the Mail.
In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:
~/Library/containers/com. Apple.mail
Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.
Some have said it works, and others say that it worked temporarily.
-
29,0 is too slow and continues to return when using of 28.0 Grrrrr!
29,0 was too slow and too jerky. I returned to 28.0 and it was fine until 29 reinstalled on its own. I checked about: config and everything everywhere was assigned to prevent back but he did anyway. Sorry to his coarse, but what gives? I had deal with this as it has evolved. We should always be able to choose, right?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.
See:
Maybe you are looking for
-
Mac Mini - no Ethernet Interface
Hello I have the Mac Mini 2011 model, and I've been using an Ethernet for some time, have not had any problems, connection worked perfectly until now. First of all, there is no internet connection, so I have just connected to wifi for a bit, then I w
-
Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15
Hello I had my HP ENVY 15 t-q100 CTO Notebook PC in September 2014. It has 8.1, 64-bit Windows. For the first few weeks of use, I don't have any problems. Then, I started having occurrences more problems of cursor/touchpad to the point where it happe
-
Laptop HP 15: updated processor
Hello! This is my first post here so excuse any errors please! So, I have a Hp i3 3110 M, bridge of Ivy 35 W, socket 988b rPGA, 21ga 39.5 motherboard and I would like to upgrade to i5. Could you recommend / tell me if there are all compatible process
-
We plan to buy some m90 and use them with 2 monitors each, working independently. What I have to install any special NVIDIA or the graphics processor integrated graphics card is enough?
-
Issue scan to a file.