29,0 is too slow and continues to return when using of 28.0 Grrrrr!

Similar Questions

• MS Office 2007 too slow and cannot be uninstalled

  Hello

  I want to uninstall my MS Office 2007 trial version that came with my new laptop (Vista OS) and install my version of Word 2000 instead. After 4 weeks of trying to use I would say that it is simply too slow, also in conjunction with other software I work with. Apart from that I have not the time and courage to familiarize myself with the completely new design.

  Unfortunately, it can be installed in the usual way. Can someone help, please?

  Thanks in advance!

  Tony

  Hello

  Have you already checked the knowledge of MS document that describes how to remove this software?

  Perhaps, it might be useful.

  [How do I uninstall Office system 2007 if you cannot uninstall it by using the function "Add or Remove Programs ' | http://support.microsoft.com/default.aspx/kb/928218/en-us]

  I'd appreciate comments after reviewing this doc.

  Concerning

• Mac is running too slow and hot.

  I think I might be problems with the software of runing core and bottom of crapware.

  I used etrechek but I can not post for some reason any.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• Wi - Fi is slow and continuous disconnect - Satellite Pro L670

  Hello

  Just got this laptop to replace my old laptop and I have a few questions.

  1 Wifi connectivity seems very very poor, constantly it connects, disconnects and fails to connect at least your next right sat the router. It shows full signal but is unable to connect when more 10 ft with 1 wall!
  I don't have the same problem with other wifi devices & laptops that I can use anywhere in my house. I've updated the bios & wifi drivers but still the same.

  I use a draytek 2820 router that is running the latest firmware.

  2. when typing the keyboard vibrates and makes a rattly noise really iritaing.

  So are these flaws, or how it is? I'll call the assistance the morning but if I can not get at least the better wifi work it's going right back to the supplier!

  Thank you

  Ash

  Try it please update driver WLAN. Latest drivers WLAN, you can find the Toshiba WLAN Portal under http://aps2.toshiba-tro.de/wlan/

  What keyboard? I put t knowledge what noise it can be, but don't you think that keyboard is not in place or what?
  You can contact the closest service Toshiba and they can verify this, of course for free.

• my computer is too slow and problem diagnosis system reports

  the product name of my laptop: Pavilion dv6 notebook pc.  Produces no serioal LM596EA #ABV SCH11410BH.  Installed operating system is Windows 7.  Error message is system better.  When I turn on my computer brings a message of "immediate test drive.  Press F2 to test disc of Hadrd", after pressing f2 brings another message of the" Test Disc hard failled.

  Thank you very much I'm ready for any question.

  Kimirei

  Please help me

• Dell Latitude E6410 touchpad becomes slow and unresponsive after an hour using XP Pro

  I have a Dell Latitude Lap Top with XP Pro (recently installed).  I noticed that the touchpad responds very after about an hour.

  How can I solve this problem?

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to return the item and check if it helps:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/ro-ro/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

• Page displayed using Adobe Flash is cropped on the left, right and bottom, but not when using Chrome or IE.

  A Web page that I use to display the data for my solar panels using Adobe Flash and it will display OK, but several versions of Firefox there, it became cut off on three sides so that you can't see it all. I can post a photo that shows all three browsers view this page and it is cropped only in Firefox. I am running the latest Firefox (27.0.1) and Adobe Flash. This has happened for at least a year. I do not notice the problem, when I'm at home, but only when I'm at work. In both cases, I have dual display 1920 x 1200. I tried to turn off hardware support, but that doesn't change anything.

  This can happen at certain zoom levels. Can you try to reset the zoom to the default level to help

  • CTRL + 0 (that's a zero) or
  • View menu > Zoom > reset

  If you already use the default level, does make a difference if set you the zoom liked or less keeping the CTRL key and typing + or - (expand and shrink, respectively)?

• CFID and CFTOKEN yet defined when using J2EE sessions

  I use CF10 and "Use J2EE session variables" are selected in the admin of CF.

  When I visit an application, I get the JSESSIONID cookie, but I also get persistent cookies CFID and CFTOKEN. The app that I work with is older and using Application.cfm instead of Application.cfc, but the ClientComm and setclientcookies application attributes are set to false.

  I don't know why CFID and CFTOKEN are still fixed. Are independently defined parameters of customer management and the session?

  When I followed post Nadel on forcing the CFID and CFTOKEN as session cookies, I found that these cookies are not at all if the SetClientCookies to the application property is set to false:

  As the docs (well, the CF8 that Google docs is) point out, the default value for SetClientCookies is true so it's why I was getting CFID and CFTOKEN.

  Thank you for pointing me in the right direction!

• Newly purchased HP Pavilion 11 is already slow and laggy when it is used first.

  Hello. Recently, I bought a laptop HP Pavilion 11 11-e113AU.

  When I started using it, it's very slow. Slow scrolling. Switching Windows is slow. It hangs a little and then continue to work again. I got comments after I posted that I bought this laptop and they said that the laptop is shit and it was a very bad performance. Is this true? I'm really getting worried because I'm starting to believe it works really SLOW.

  Even when you do simple tasks like scroll or transition from window to window, minimize the window and opening a folder, searching for words is slow and laggy. Especially when using Facebook in google chrome. Scrolling is laggy, lag very

  What seems to be the problem? It is brand new. I think that we lost a lot of money on this laptop. Help, please. What can I do to make it faster? I'm really disappointed that I bought it. I'm from the Philippines. Help, please

  

  Hi again.

  Thanks for the details

  1. Yes, I think that this McAfee product not suitable for the configuration of your computer. It can slow down your computer.

  McAfee may be able to detect the virus/malware but is know that it is not the fast/more lighter AV.

  I suggest you completely uninstall and restart your computer.

  Finally, run the McAfee removal tool

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Instructions-> http://service.mcafee.com/faqdocument.aspx?id=TS101331

  2. I am not aware of the details of your computer, but in order to change the processor, you will also need to change the motherboard which is not a small change. If it can be changed, my colleagues in the support will be able to respond better.

  However, I don't think that this change is necessary at this time. You/we have not crossed all possible options.

  Let me stress again that these type of mobile computers are expected to generally not to be used for heavy load such as graphic design software (Adobe Photoshop example / AutoCAD) or Machiavellian heavy. They are smaller and lighter than the typical laptio, only 11 inches and mobility is their biggest advantage.

  3. at this time you need not to add 4 GB of additional memory. According to the data provided, you are currently using 1.79 GB of your physical RAM (less than 50%). If you add additional RAM at the present time, this change anything re. performance

  4. has reviewed your supplied log file.

  S ' Please, uninstall McAfee. Reset. Once that just activate Windows Defender (built into Windows)

  http://www.TomsHardware.co.UK/FAQ/ID-2063942/turn-Windows-Defender-Windows-Windows.html

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03275183-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1407600943192.876444892.199480143

  -Follow the steps previosly offered by Futoji

  http://support.HP.com/us-en/document/c03340676

  such as disk defragmentation, removal of temporary files, etc.

  Please, let me know how it goes after you follow the instructions. I think that there should be an improvement.

  Feel free to ask for help if you are having problems.

  If you want to say thank YOU and show tips, click on the thumb white BRAVO upward. If your problem has been resolved - click on the appropriate button and accept the post as a solution. If you want to provide more advice and words, send me a private message *.

• Satellite Pro L500 - wireless connection is very slow and unstable

  Hello

  I bought a Satellite Pro L500 a couple of weeks (Windows 7 and Realtek 8191SE). I have no problem connecting to public networks, but I can't use it at my place, where I have a broadband cable connection.
  The strange thing is that, in the same room, I have no problem with my old A105 Satellite (Windows XP).

  It is also very strange the fact that, even if the signal is good, sometimes excellent, the connection is very slow and unstable (it disconnects when I try to browse the Internet).

  I have already tried:

  -Update the Realtek drivers.
  -Disconnect the firewall;
  -Modification of the properties of the Realtek card.

  Maybe it's a problem with the software or, on the contrary, with the material?

  Thank you!
  Poncet

  Hi Patrick,

  If you can connect to public networks correctly, I think that this problem is related to your router at home. So I would recommend updating the firmware on your router. You can get it on the page of manufactured goods.

  Also try to disable WLAN encryption and MAC address filtering.

  By the way: you can access the Internet at home via a cable connection?

• The heat of my computer a lot and it suddenly stops when Im playing certain games.

  My computer get too hot and it suddenly stops when Im playing certain games. Can you give me any advice to solve this problem. (I would like to format the pc and put it as the 1st time using, but I accept more tips) I have a cooler, but I think I'll buy a new one.

  Original title: heat of the computer

  EPPT

  With the computer turned off and not plugged in you should carefully blow out the fan and radiator.  Laptops are not suitable for playing games in the first place.  If the cooling block does not help and the computer is more than a year, you may need to reapply the thermal CPU paste or frankly just not playing games with her.

• Application and interface scrambled freeze when the effect is on the clip

  Dear users of Adobe.

  Some day my application Adobe first CC began to malfunction. Maybe some Windows 7 update or update graphics card fit, because when I saw this problem on a project, all projects, I opened have been made from this time and new project as well.

  DESCRIPTION OF THE PROBLEM:
  When I apply any effect to any clip, the user interface freezes. It works, but the display is hanged:

  -I can rub on the timeline, but the timeline indicator does not move (clip playing on monitor or second full screen and rubbing noise is there)

  -I can toggle effect, but the icon remains (I see on the photo that the effect is en/diss)

  -Effect cannot be edited or deleted

  -On some effects first freezes if I try to change the effect (kill application in the Task Manager is required)

  -Program start to answer (and I can edit effects) once I reset workspace. I have to reset the workspace after each / every effect is applied to the clip. What is bulky.

  -Problem exists with all the custom saved space and work with the first all those, as well with those I create new ones. Workspace so probably not corrupted.

  -J' have all Windows updates and the latest version of the software of GPU (I even tried several beta different drivers from nVidia, but no change to the problem).

  I have two screens on nVidia GTX770 (ASUS) where one is the program monitor, and it shows image full screen. Problem is the same if only one view is used, but while testing this I found another scenario where MISTLETOE is reset, without reset via menu option: If the focus went from the Panel to the PROGRAM Committee, GUI is reset and I can work normally. This work only if two panels are on the same group, the Panel of the hidden program because while the effect controls panel is active. If I drag the effects (on second monitor) TIME focus have no effect. I need to reset the workspace only.

  Some effects become not only which do not meet, but even the hang first if I try to edit before you reset space work (or switch effect-> program). In this case, I need to kill the process monitor first (Task Manager). If I reset the right of the workspace after that I place effect on clip, first work normally until I add new effect to new (or even) a clip. If I COPY-PASTE effects from clip to clip, it works without the reset workspace.

  When I close the first, more often it does not turn OFF in process list. I have to kill the process before I want to run again. Or restart the PC, of course. I know when he did not stop second doe to display full-screen does not return to the office, but stays black until I have to kill the first. First remains in memory even if I use only one view. QT32 process stops when I kill the process of creation.

  During the problem done first, Adobe Media Encoder does not work. It begins its own process of QT32 and it closes properly, without worrying first is stuck or active.

  I have a slight idea this problem started when I installed first CS6 and it have uninstalled after leaving Encore CS6 on the system. I think it is software problem, because lately, I is no rate of material. The system is almost 2 years old SB-E with INTEL DX79SR Board. I reinstalled windows, a few months before, but the problem started a week ago after some update or even CS6 associated. I can't say for shure. I have no install/uninstall other software PC lately.

  I use the 6.5 version first. I always solved my problems by reinstalling Windows and first or by finding the solution on the forums. This time I found nothing on all internet and I cannot reinstall system before finishing long project. But this problem, it is more difficult to finish. It seems that system is slower and less sensitive, as it used to be.

  Thank you very much for any advice or solution.
  MIHAEL

  Hi all

  It is a problem with the last GoPro Studio Installer. We're going to be it fixed in the next version of Studio of GoPro. in the meantime, you can solve it by removing the CineForm entries in the following folder:

  c:\Program files\adobe\adboe first pro cc\settings\badgeicons\

  Jake Segraves

  Director of technical support

  GoPro

• Deal with failure when using LabVIEW 2011 and DSC MODBUS communication

  I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.

  My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.

  I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.

  Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.

  Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.

  Any help on this would be appreciated.

  So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.

  In addition, the addresses seem to be shifted by + 1.

  Thanks for the tip so.

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• BUG? (%) Dial and dial gauges return odd if negative values of numbers

  Using AnyChart 5 and Apex 4.0
  
  When using a Dial gauge (percent), I'm trying to measure quarter percentage growth during the quarter.
  
  Tell me Yes we have sales of $100 in the 2nd quarter of 2009 and the sale of $80 in the 2nd quarter of 2010.
  
  We should see a percentage of 20% growth.
  
  My query returns a single line as for the gauge. However the gauge indicates 1%. Positive rather than negative.
  
  When I run my query in TOAD and APEX SQL WORKSHOP I get the OK - 20%.
  
  So I pull the XMLfile URL on the < embed > tag and drop it in my browser. The XML returned with a positive 1 as the value of the gauge pointer. Because the XML generated by the apex_util.flash procedure, I'm guessing that there is a bug?
  
  XMLfile = "http://apex.server.com:PORT/pls/apex/apex_util.flash?p=108:5:3130601357809295:FLOW_FLASH_CHART5_R5524931725885645_en."
  
  generated:
  
  ... < type pointer = "needle" value = "1" color = "0xF1683C" >...
  
  I even tried to make the series ' SELECT-20, max_val 100, low_val-100, 100 hi_val OF THE DOUBLE ' and then got a positive 1% on the dipstick?
  
  ---------
  Published by: WannaRock on August 3, 2010 14:16
  ---------
  Tried to switch to a regular dial as opposed to dial (percent). But then, any value should be returned, the dial has returned a value of-99. I need to try a few things and update this post...
  
  -----
  Published by: WannaRock on August 3, 2010 14:26
  -----
  Seems to be a problem when there is a negative value, AND you specify a up/down column in your query. IF I delete the columns high and low of the query, I get the right numbers when they are positive values. But the negatives do not return (for example, I had a 1% where I should have gotten a-84%). Strange behavior.

  Hi Walter,

  You hit a limitation where gauge cards currently do support the display of positive values. However, this restriction has been removed for Flash 5 graphics and support for the display of negative values on the gauge cards will be included in our next release. This issue is followed by bug 10024437.

  In the meantime, you will have to customize your chart XML in order display negative values. This would require that you replace the chains of substitution #SCALE_DATA # and #DATA # in the custom with your own and area of XML information.

  Kind regards
  Hilary