Card problem NETWORK M30, exchange of memory + HDD replacement

Similar Questions

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• the scan to memory card problem

  I have a HP C4180 all-in-one printer.  Having a problem with scanning on memory card.  Gives message that the memory card is not found, although it is in the appropriate slot.

  Hello PJ65,

  Welcome to the HP Forums!

  I understand that your Photosmart C4180 is not read the memory card. I will do my best to help you! Please follow this document from HP on the memory card troubleshooting. Additionally, make sure that the printer is connected to a live wall, not a surge protector.

  If you encounter the same problem, contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

  Good luck.

• Pavilion TS 11 portable WIFI & network card problems!

  Hello!

  I bought again notebook Pavilion TS 11 with 8 64-bit windows. His new cell phone. WiFi card and network works fine, after that 1 windows update my wireless connection and interent closing. I try to use every single driver on the hp website - nothing works.

  After I configure a new installation of windows 8 since the recovery partition, internet and wifi only ' works from the beginning.

  This is my windows report screen 8 [PL]: http://imageshack.com/a/img856/522/qe4t.png

  He said: do not work driver for network card and wifi.

  Can someone help me out here?

  It's interesting.

  Wifi connection in the systray icon, as seen usually indicates that there is a wifi connection. Click on it to see if it shows a connection.  Is the wifi led lit and white instead of amber?  Can you put a picture of the device manager that shows the wireless network card?

  

  An option would be to connect the CAT5 cable to your router or modem, and then use the HP Support Assistant.  Click on the HP icon in the toolbar start the HP Support Assistant. Take a look at the section updates and optimizations. You can click on it to find the driver ojnthe HP Server support as long as you have an internet connection.

  

• Start Windows Vista or graphics card problem problem

  OK have a problem with Windows Vista here. Its pc of my grandmothers, only a year or two. (office) My brother went in safe mode and came back with a restore point. He said it worked, but now, the screen goes black trying to open windows.

  What's happening...
  It starts showing the status of the drives and ram memory and asks me if I want to install through F10 (which works) then it goes to the "Windows was extinguished not correctly." And it gives the offer of
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Normal windows startup
  The security mode through the long load upward and then a black screen and an arrow of big white mouse I can move.
  Normal windows opens with the quick bar Windows... then nothing. Just a black screen and a white mouse arrow. Of Cntrl Alt Del does nothing and only thing that makes something happen hit SHIFT 5 times. It causes a beep and a window opens asking if I want to use StickyKeys. Other then that I had nothing.
  I'll try to find a Windows Vista dvd to repair.
  Part of me wonders if it is a screwing display driver. As I said some stuff shows up to save for windows, so it's a small chance, but to think what anyone.
  Care,
  Windows Vista Edition home premium
  HP Pavilion p6110t

  Hello

  If you start Windows, see a desk white or black with no icons, video card problems are the most common cause of this problem.

  Try the following troubleshooting steps:

  Method 1: Access your computer and reinstall your current video driver

  Uninstall your video driver and allow Windows to re - install:

  1. click on start and type device manager in the search box

  2. click on device under Programs Manager

  3. Select the video driver and uninstall

  4 restart your computer to allow Windows to reinstall the driver

  Note: Once the driver is reinstalled, you may need to restart your computer to complete the installation. In addition, you will also need to adjust the resolution of the display to its previous value.

  Method 2: Turn on the video resolution (640 x 480) and then update your video card driver

  If the resolution of the registry problems does not work, perform the following steps to activate the video resolution:

  1. Click the Start button, click the arrow next to Shut Down and then click on restart.
  2. Press F8 before the Windows logo appears.
  3. In the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.
  4. Log your computer with a user account with administrator rights.

  If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information,.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Start your computer in Mode safe mode and disable your video card

  If activation low resolution and then update your video card driver do not work, perform the following troubleshooting steps to disable your video card driver:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  When your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 5: If these steps do not resolve your problem, try to boot mode safe again and follow the steps in the system restore to restore your computer to an earlier point in time.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Note: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  If this still does not have the problem, contact your computer manufacturer or the technical support for further assistance.

  It will be useful.

• Excite At10 Pure and 64 GB SD card problem

  Toshiba Tablet excites pure at10-a-104

  SDXC UHS - I class 10 64GB Kingston memory card (gold edition: 90 MB/s read, write: 45 MB/s) format exFAT
  About 45 GB of images on the card.

  When I use android apps for photos of presentations as QuickPic or typical Gallery of the Toshiba tablet, aplication often completely stops (gel, suspend) Tablet (not all functions work, I have to reboot the Tablet).
  I tried to use other applications to presentations of photo from the game of Google but effects was even worse.

  What is the problem. I have to:
  1 tablet complaint service (it security)
  2. complaint of memory card (it security)
  3 configure the memory tablet to special (?) options

  I'll ask for help.

  Post edited by: Petry

  According to the specification of Toshiba page that I could find on the internet, the micro-SD card slot allows you to store and share your photos, videos and large multimedia files, using SD cards up to 32 GB
  Therefore, the question could be linked to the size of 64 GB SD micro card it s not supported

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan.

  I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan. What is the best way to do it?

  I think the best would be a new installation of El Capitan on the new HD and reinstall the applications on the new HD, and then migrate the data and setting for the previous version of OSX. In this way the least unused stuff enters the new OSX version

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• Is possible to extend the graphics memory or replace the graphics card on the Satellite P10 504

  Anyone know if it is possible to extend the video memory on the satellite p10 504, or to replace the video card. Because the memory is too small to play most of the good games.

  Hello

  Unfortunately, it is not possible to increase the graphics memory or replace the graphics card on the laptop computers of s.
  Please don t compare cell phone technology with the desktop simply.
  Laptops use other motherboards and graphics cards are mostly welded on the boards!

  Nothing to do, buddy

  I wouldn't buy a laptop if you want to play the latest games! Why? Because of the possibilities of upgrading equipment.
  The desktop PC can be upgraded very easily but not the laptop

• Acer Liquid E2 SD card problem

  Hello

  I bought an E2 liquid Acer in January of this year. Yesterday, I bought a micro SD card to put in my smartphone.

  Now I want to save photos and movies directly on the SD card, because my smartphone's internal memory is full. For the moment, it does not work... My settings are already changed to back up everything on the SD card and still no change.

  Does anyone know if I'm doing something wrong?

  Sorry for any mistakes in my text, but English is not my mother tongue.

  Thank you very much!

  Start the camera application, at the bottom left you will see a "gear" icon, tap it, scroll down the settings and you will find the option for recording on internal memory or SD.

• best video card with 1 GB ddr3 video memory

  my old 1 GB video card died on me, and I need a replacement. I didn't need with ddr5 memory because I need a lot of performance. suggestions as to what I should get? I have a hp pavilion p6607c with 4 GB of ram and an amd athlon (tm) II X 2 220 processor (2.80 ghz)

  AlbertoHG1,

  Please keep your posts on this slot reservation of one and only one thread. From multiple threads with the same content makes it harder for help us to you.

  It is unlikely that this will damage the GPU using a PSU low power.

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• ERROR WITH "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER.

  GOT AN ERROR MESSAGE SAYING "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER STOPPED WORKING AND WAS CLOSED" AND NEED TO FIX. WHAT SHOULD I DO?

  Hello

  Actually try updating your driver and check with Dell Support and Forums if necessary.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  Dell - drivers
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2