Telnet password

Similar Questions

• Customizing configuration LMS 3.2 netconfig telnet password

  I try to configure vty password telnet using netconfig. I want to do the configuration only for line vty 0-4, but I'm not able to find a way to set line numbers. In addition, there also the command of login being added by himself.

  The default configuration, it shows is as follows: -.

  line vty 0% MAXLINENUMBER %
  password *.
  default authentication connection %
  output

  And how I want to set up is as follows:-

  line vty 0 4
  password *.
  output

  Please suggest if there is a way.

  Hi Soniya

  Your are quite correct in thinking that this might not work. But fortunately for you - it works.

  Just paste the config set you need in ad hoc tasks and he deply.

  Like this:

  line vty 0 4

  password cisco12345

  opening of session

  That's it - no need to add "no exit" or the other.

  It will be useful. Cheers.

  Stone

• PIX Telnet lost password

  Hello

  Is there a solution to replace a password for Telnet on a PIX 501?

  I got the admin password, I am able to get into the pdm interface, but I lost the password to Telnet.

  Thanks for any help

  It would be easier if you have access to the pix console. If so, you need not the telnet password. You can get the mode using the admin password and change the telnet password.

  I tried to ssh to a pix using a username/password local name, I thought that if I ssh to a pix even with user privilege 2, you can still get the mode by the password admin unfortunately it does not work regardless of the user privilege level.

  so I guess that if you do not have access to consoles, one way to do this is to perform a recovery of full password as suggested by pakpoor.

• Authentication of SSH without password on a PIX

  I'm looking to implement authentication SSH without password for a Solaris client can run a script to open a session on a PIX and retrieve the configuration.

  Someone has reached the SSH authentication without password on a PIX or find out if the device supports it or not?

  Thank you, Dom

  It is vaguely correct.

  Here are the details:

  Security506E - 6.x (config) # aaa HS

  AAA proxy-limit 16

  authentication AAA ssh console LOCAL SecurityACS1111

  Console HTTP authentication of the AAA SecurityACS1111 LOCAL

  Console Telnet AAA authentication LOCAL SecurityACS1111

  Console to enable AAA authentication LOCAL SecurityACS1111

  LOCAL AAA authorization command

  now, if you have configured aaa on the pix and specified an aaa for the role of authentication server when ssh is done "'authentication aaa ssh console LOCAL SecurityACS1111'...". then the username and passwords of the Ali database should be provided when ssh is done.

  If you have specified LOCAL as an authentication method, then the database username and password configured in the configuration of the firewall will be used for the purposes of authentication.

  If you have not specified "ssh" under "sh aaa" command output, then the default settings are used.

  dafault settings:

  username: pix

  telnet password: password you have defined with the command:

  password

  activate the password:

  password, you have defined using:

  activate the password

  Please indicate if this help!

  Sushil

  Cisco tac.

• Unable connect to the webgui LGS308 crashes at 90% on the treatment of the data

  Hello

  I have a LGS308 but I can not connect to the webgui interface more.

  The user name and password are correct, but there is a dialog box with the title "Data processing" and a progress bar.

  This goes up to 90 percent and crashes there.

  Already removed the power and put the power back in, but no result.

  Always the same, also tried other browsers, always the same result. (or hangs at 80%).

  Is this a known issue? and is there a solution for this?

  I really need to reconfigure the switch.

  Had the same problem, thanks for the tip on the expiry of telnet/password. Worked fine for me also.

  Looks like you can set the password, time-to-live in telnet "cisco" config mode.

  Telnet to the switch

  Opening of session

  Press Ctrl-A

  Type "lcli" to the ">" prompt

  Connection again...

  Type "conf t".

  Type "aging 0 passwords"

  Press Ctrl + Z

  Type "wr" to save.

  Fact!

• Change the preferred default command to EXEC mode

  I'm putting a 2800 series router and prefer authentication type name of user and password rather than allowing a single password. To do this, I did:

  Router (config) # username secret privilege 15 0

  Router (config) # NomUtilisateur2 privilege 15 secret 0

  Router (config) # aaa new-model

  Router (config) # aaa authentication default local connection

  That's basically what I want--when I connect to the router through the console, he immediately asks me a username and password. The thing is - as soon as I provide the right credentials, need me the USER EXEC (default command mode) mode. Is it possible to change this so that after you enter the credentials, I'm going straight to privileged exec mode?

  Bonus question: as it is now, I have no enable password, so when I login with my references, I run 'enable' to enter exec mode privileged without him asking to specify an additional password. Is it safe to do this way - have no password enable but requiring a username and password to login?

  Hello

  We do this all the time. It works the same way on telnet

  Line vty 0 4

  Priveledge level 15

  That way when we telnet in, it takes us right to the exec.. priv mode Most people have the same enable the telnet password / console password anyway so my humble opinion, it's the same thing. If you try to be ultra safe, to do something different from your enable password and do not use this little trick... But like I said... I use it all the time.

  Paul

• Cannot connect to internet after connecting to VPN Cisco ASA 5505

  Hi all

  I am an engineer of network, but haven't had any Experinece in the firewall for the moment, I'm under pressure to take care of a ASA 5505 were all VPN and incoming and out of bounds have been set up, recently I've had a few changes and re made the change, but unfortunately, he took some configurations that are ment for VPN now I am facing a problem,

  VPN connection, but impossible to navigate on the internet is my problem, I tried inheriting tunneli Split, but I coudnt get through it seems, I did something in a bad way, I use here for most ASDM,.

  I paste the Configuration for the investigation, although he's trying to help me.

  ASA Version 8.0(4)16 ! hostname yantraind domain-name yantra.intra enable password vD1.re9JLbigXJxz encrypted passwd hVjSWvtgvNN21M./ encrypted names ! interface Vlan2 nameif outside security-level 0 ip address Outside_Interface 255.255.255.240 ospf cost 10 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 2 ! interface Ethernet0/6 switchport access vlan 2 shutdown ! interface Ethernet0/7 switchport access vlan 2 shutdown ! boot system disk0:/asa804-16-k8.bin boot system disk0:/asa724-k8.bin ftp mode passive clock timezone GMT 0 dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 192.168.0.106 name-server 192.168.0.10 domain-name yantra.intra same-security-traffic permit intra-interface object-group service Email_In tcp port-object eq https port-object eq pop3 port-object eq smtp object-group service DM_INLINE_TCP_2 tcp port-object eq ftp port-object eq ftp-data port-object eq www object-group service RDP tcp port-object eq 3389 object-group service DM_INLINE_SERVICE_1 service-object icmp service-object icmp traceroute object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service voip udp port-object eq domain object-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data access-list outside_access_in extended permit tcp any host  object-group Email_In access-list outside_access_in extended permit tcp any host FTP_Server_Ext object-group DM_INLINE_TCP_1 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit tcp any host ForSLT eq www access-list outside_access_in extended permit tcp any host Search object-group DM_INLINE_TCP_2 access-list outside_access_in extended permit tcp any host IMIPublic eq www access-list outside_access_in extended permit tcp any host eq www access-list outside_access_in extended permit tcp any host SLT_New_Public eq www access-list outside_access_in extended permit object-group TCPUDP any host 202.133.48.68 eq www access-list rvpn_stunnel standard permit 192.168.0.0 255.255.255.0 access-list rvpn_stunnel standard permit 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list nat0 extended permit ip host IT_DIRECT 192.168.0.0 255.255.255.0 access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended deny object-group TCPUDP host 192.168.0.252 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console debugging logging buffered debugging logging trap debugging logging history emergencies logging asdm debugging logging host inside 192.168.0.187 logging permit-hostdown logging class ip buffered emergencies mtu inside 1500 mtu outside 1500 ip local pool rvpn-ip 192.168.100.1-192.168.100.25 mask 255.255.255.0 ip verify reverse-path interface inside ip verify reverse-path interface outside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any traceroute outside asdm image disk0:/asdm-61551.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list nat0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) netmask 255.255.255.255 dns static (inside,outside) FTP_Server_Ext FTP_Server_Int netmask 255.255.255.255 dns static (inside,outside) ForSLT SLT_New netmask 255.255.255.255 static (inside,outside) Search LocalSearch netmask 255.255.255.255 static (inside,outside) IMIPublic IMI netmask 255.255.255.255 static (inside,outside) SLT_New_Public SLT_Local netmask 255.255.255.255 static (inside,outside) netmask 255.255.255.255 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 202.133.48.65 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication http console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map rvpn_map 65535 set pfs crypto dynamic-map rvpn_map 65535 set transform-set ESP-3DES-SHA crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer  crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map 2 match address outside_cryptomap crypto map outside_map 2 set pfs crypto map outside_map 2 set peer crypto map outside_map 2 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic rvpn_map crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=yantraind proxy-ldc-issuer crl configure crypto ca server shutdown crypto ca certificate chain ASDM_TrustPoint0 certificate f8684749     30820252 308201bb a0030201 020204f8 68474930 0d06092a 864886f7 0d010104     0500303b 31123010 06035504 03130979 616e7472 61696e64 31253023 06092a86     4886f70d 01090216 1679616e 74726169 6e642e79 616e7472 612e696e 74726130     1e170d30 38313231 36303833 3831365a 170d3138 31323134 30383338 31365a30     3b311230 10060355 04031309 79616e74 7261696e 64312530 2306092a 864886f7     0d010902 16167961 6e747261 696e642e 79616e74 72612e69 6e747261 30819f30     0d06092a 864886f7 0d010101 05000381 8d003081 89028181 00f6d1d0 d536624d     de9e4a2e 215a3986 98087e65 be9f6c0f b8f6dc3e 151c5603 21afdebe 85b2917b     297b1d1c b3abf5c6 628afbbe dda1ca27 01282aff 6514f62f 2965c87c 8aab0273     ab59dac6 aa9f549b 846d93fd 44c7f84f b29545bb d0db8bbb 060dfbbf 592a15e3     3db126be 541003c4 38754847 0b472e62 d092fec2 d556f9e3 09020301 0001a363     3061300f 0603551d 130101ff 04053003 0101ff30 0e060355 1d0f0101 ff040403     02018630 1f060355 1d230418 30168014 9f66b685 2ebf0d5a 97a684ba 9a9518ca     a8ed637e 301d0603 551d0e04 1604149f 66b6852e bf0d5a97 a684ba9a 9518caa8     ed637e30 0d06092a 864886f7 0d010104 05000381 81003b49 2a7ee503 79b47792     6ce90453 70cf200e 943eccd7 deab53e0 2348d566 fe6aa8e0 302b922c 12df802d     398674f3 b1bc55f2 fe2646d5 c59689c2 c6693b0f 14081661 bafb233b 1b296708     fc2b6cbb ba1a005e 37073d72 4156b582 4521e673 ba6c7f7d 2d6941c4 9e076c39     73de21b9 712f69ed 7aab4bda 365d7eb3 39c05d27 e2dd   quit crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 15 ssh version 2 console timeout 0 dhcpd address 192.168.0.126-192.168.0.150 inside dhcpd dns 192.168.0.106 192.168.0.10 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 webvpn group-policy DfltGrpPolicy attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-dns value 192.168.0.106 group-policy rvpn internal group-policy rvpn attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value rvpn_stunnel default-domain value yantra.intra username rreddy password 6p4HjBmf02hqbnrL encrypted privilege 15 username bsai password 41f5/8EINw6VQ5Os encrypted username bsai attributes service-type remote-access username Telnet password U.eMKTkIYZQA83Al encrypted privilege 15 username prashantt password BdrzfvDcOsnHBIdz encrypted username prashantt attributes service-type remote-access username m.shiva password p5YdC3kTJcnceaT/ encrypted username m.shiva attributes service-type remote-access username Senthil password qKYIiJ9NmC8NYvCA encrypted username Senthil attributes service-type remote-access username agupta password p3slrWEH1ye5/P2u encrypted username agupta attributes service-type remote-access username Yogesh password uQ3pfHI2wLvg8B8. encrypted username Yogesh attributes service-type remote-access username phanik password inZN0zXToeeR9bx. encrypted username phanik attributes service-type remote-access username murali password Ckpxwzhdj5RRu2tF encrypted privilege 15 username mgopi password stAEoJodb2CfgruZ encrypted privilege 15 username bill password Z1KSXIEPQkLN3OdQ encrypted username bill attributes service-type remote-access username Shantala password aCvfO5/PcsZc3Z5S encrypted username Shantala attributes service-type remote-access username maheshm password Fry56.leIsT9VHsv encrypted username maheshm attributes service-type remote-access username dhanj password zotUI9D6WWrMAh8T encrypted username dhanj attributes service-type remote-access username npatel password vOfMuOZg0vSkICyF encrypted username npatel attributes service-type remote-access username bmandakini password Y5UZuahgr6vd6ccE encrypted username bmandakini attributes service-type remote-access tunnel-group rvpn type remote-access tunnel-group rvpn general-attributes address-pool rvpn-ip tunnel-group rvpn ipsec-attributes pre-shared-key * tunnel-group  type ipsec-l2l tunnel-group  ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group  ipsec-attributes pre-shared-key * ! class-map global-class match default-inspection-traffic class-map inspection_default ! ! policy-map global_policy policy-map global-policy class global-class   inspect esmtp   inspect sip    inspect pptp   inspect ftp   inspect ipsec-pass-thru ! service-policy global-policy global prompt hostname context Cryptochecksum:7042504fefd0d22ce4de7f6fa4da14fa : end 

  Thanking you in advance

  Hello

  If you want to have Split-tunnelin in use. One you have patterns for.

  Then you will need to fix the configured "private group policy" under the "tunnel - private-group

  tunnel-group private general-attributes

  strategy - by default-private group

  Then reconnect the VPN Client connection and try again.

  After that the VPN Client connection only transmits traffic directed to the LAN on the VPN Client connection and all Internet traffic beyond the VPN connection directly to the Internet through the current connection of the users.

  -Jouni

• ACS 'Password change rule' does not work with telnet

  Hello:

  I am configuring users will have to change their password when they enter a network device, the first time they connect.

  I have a camera ACS 4.0, the option "disable TELNET change password against this ACS and send the following message to the telnet users session" is disable. When I try to enter in a Catalyst 6500, for example, I type user and pass and I get rejected (RADIUS is the protocol used).

  In the reports of the CSA, I can see, it seems the following error "Impossible authentic - CS expired password.

  I activated the option 'Apply the password change rule' in group settings, other options for the 'password aging rules' are disabled.

  Thanks for your help,

  Francisco

  You can use GANYMEDE + to get the change of password to work.

  Does not work with the RADIUS.

• enable the telnet and password

  Or remove them. Hello. My goal is to one or two internal connections on each Cisco device and then allow Radius Authentication for telnet or SSH?

  Is there a simple way to do this on a Cisco device?

  Thank you

  Dwane

  Oh, I see what you mean, use local authentication failure RADIUS! You're almost right.

  AAA authentication login LINE1 group local RADIUS

  line vty 0 4 'or '.

  line vty 0 15

  authentication of connection LINE1

• I can not change / set the smtp password.

  T - bird 24.5.0 running. On Ubuntu 10.04. There seems to be no way to change/set the password. Here is an overview of the screen indicating a change of account: http://k4gvo.com/images/smtp.png I don't see a way to set/change the password and an exhaustive search of the other menus, including the configuration editor has not helped. For some reason, probably because of an automatic update, he ceased to send emails. I manually installed 24 to see if that helped, but it didn't. This profile/account is probably 5 or more years so there is probably something in the profile that is the pipe upwards. I tried to add a new e-mail account so I could put the server by default to it but it won't let me. He went through all the motions, but when I look in the list of accounts, it isn't here.

  I created a new user account on the system and it I would like to create a usable smtp profile without change it however.

  I'd start on if I can save emails, however when I tried to copy the Mail / directories < account > to another user to test, they never came.

  Thank you
  Jim.

  Setting are OK because I used the same settings on a different system and it works fine. Also, using the same user/pw I receive mail fine, just can't send.

  I can connect from the command line: tbird should therefore be able to from the same system, right?
  Telnet Wxxx - xxxxl.com 587
  184.221.22.22 by train...
  Connected to wxx.xxxxl.com.
  [Escape character is ' ^]'.
  220 - sunxxx,xxxoc.com ESMTP Exim 4.82 #2 Saturday, June 7, 2014 15:34:48-0400
  220. we do not allow unsolicited use of this transport system,
  220 or in bulk by email.

  See also picture as an attachment.

• How can I stop people to send e-mails via telnet from outside

  Hello

  I am looking for a solution for 1 month, we exchange server 2010 with local antispam (integrated with the firewall)
  anyone can make (public ip Exchange) telnet port 25 and can send emails for mailboxes mailbox internal * address email is removed from the privacy *.
  How can I disable the telnet so that if someone tries to send e-mail from outside the local domain to get error or request password.
  We had a serious problem because of this, someone outside email sent using telnet to our Chief Financial Officer and he thought it was a valid email address :(
  Please help please

  Hello

  I am looking for a solution for 1 month, we exchange server 2010 with local antispam (integrated with the firewall)

  anyone can make (public ip Exchange) telnet port 25 and can send emails for mailboxes mailbox internal * address email is removed from the privacy *.

  How can I disable the telnet so that if someone tries to send e-mail from outside the local domain to get error or request password.

  We had a serious problem because of this, someone outside email sent using telnet to our Chief Financial Officer and he thought it was a valid email address :(

  Please help please

  Try asking in Exchange Server Forums:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• install the Telnet Service for remote access

  How do we install the telnet service on my pc I can access the pc from anywhere under the same gateway.

  Reach

  beginning

  Run

  Type "services.msc".

  find and start the telnet service, and set the startup type to automatic

  Now you set any password for your administrator account?

  If not now

  go to my computer > right click > manage

  find user and group > select Administrator > right click > set password

  now go into firewall of network properties, made setting a right click on the network adapter Firewall setting and allow the exception to add 23 like telnet port name

  and you're done

  Restart your system

  Hope this work

  Best regards and good luck

  Sohail Khan

• M6348 Firmware Password

  Hello, I've updated the firmware on my switch M6348 following the "modernization PowerConnect password 2.x.x.x or 5.x.x.x 3.x.x.x or 4.x.x.x to 5.1.10.1 Firmware Version" guide. However once it reboots I am more able to connect to the switch with any combination of username and passwords. I tried to connect via telnet and who does not. I followed the directions exactly.

  I'm hoping to avoid having to connect to the console I am 700 miles from the switch.

  Please notify.

  Thank you!

  Too bad, I thought of it.

  I have SSHd in CMC, then used the switch-1 connect command. I provided the enable password and was then able to use the user name command to configure an admin user.

• reset the password on a Dell PowerConnect M6220

  Hello, I'm trying to reset the password on a Dell PowerConnect M6220.  Can connect to the CMC via the https Web page, I don't see how to do it from there.

  Then I'll try to plug a USB serial cable into the console port and reset the password via a console session using teraterm but when I do that all I get is a white screen.

  Parameters of the series are:

  Cable: The Null Modem

  Bits per second: 115200

  Data bits: 8

  Parity: None

  Stop bits: 1

  Flow control: no

  Any ideas on how I can access telnet access to the device to reset the DDT successfully

  Thank you

  Kevin

  You can connect to the console port internal to the switch via the CLI of CMC

  Telnet to the CMC, then connect switch-a1 (a2 or b1 etc. etc.)

  This will give you the > invites, so either delet the startupconfig and recharge it, or put into you own username and password - remember that you can set on the schema of the interface of the band or band in slecting the appropriate interface

• Telnet is missing from the Windows features in Windows 7

  I wanted to use telnet.  I went to the command prompt and enter the name of the telnet server.  He received a message indicating that it does not recognize the telnet command.  I thought that it had to be turned on in Windows (features) components.  I went to the Control Panel, get the programs, and then turn on or off Windows features enable.  Completely empty the box that opens.   There is no options to check or uncheck.  It is completely empty.  How can I get the Windows features in there?

  Concord wrote:
  > I tried to use telnet. I went to the command prompt and enter telnet
  > servername. He received a messege indicating that it has not identified the telnet
  > command. I thought he must be turned on in Windows components
  > (Features). I went to control panel, download programs and select Activate Windows
  > features on or off. Completely empty the box that opens. There is zero
  > options to check or uncheck. It is completely empty. How can I get the windows
  > Features in there?
   
   
  Windows 7 support:
   
  By default, Telnet is not installed with Windows, but you can install it
  by following the steps below.
   
  To install the Telnet Client
  Click the Start button, select Control Panel and then click programs.
   
  Under programs and features, click Turn Windows features turn on or off. If
  you are prompted for an administrator password or confirmation, type the
  password or provide confirmation.
   
  In the Windows features dialog box, select the Telnet Client check box.
   
  Click OK. The installation may take several minutes.
   
   
  --
   
  Bruce Chambers
   
  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html
   
  http://support.Microsoft.com/default.aspx/KB/555375
   
  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin
   
  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell
   
  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot