Temp CPU and motherboard

Similar Questions

• processor and motherboard too hot!

  Help, please! I recently bought a HP Pavilion Sleekbook 14-b065tx. It came with the BACK. So I installed win 8.1 on it. everything works quickly and smooth that I love him.  but I have istalled speccy and checked the temprature, that I'm typing this, only chrome and Speccy run! but temp cpu and motherboard are constantly only between 61-65 c c! is it Ok? the fan is workig all the time!

  

  I thought to my self. I got a bad virus like program that runs in the background takin 90% of cpu! I took it!

• HP Pavilion G6 1356-el; CPU and card mother temperatures

  Hi, I am a happy owner of this laptop great, but I have a question: when I play videogames temperature is about 70, even 80 °, talk about the (2450 m i5) CPU and motherboard. What is normal and safe, your should I need to worry and buy a basement of fan or something? THX,

  Nicolò.

  http://www.YouTube.com/watch?v=cf5XvOWRHWU

  I like the fact that you can move the fans and it's cheaper. I also think that if one of the fans couldn't you could just buy a replacement.

  I go with this one, but keep in mind it is at an angle of permanent, so if there is a problem, this isn't for you.

  Here's the Google search I did for her. Trying to find how much noise generates.

  https://www.Google.ca/search?q=Cooler+Master+NotePal+U2&SourceID=IE7&RLS=com.Microsoft: en - us: IE-address & ie = & oe = & redir_esc = & ei = tpyXT8i7JImfiAKHq-zLDw

• problems with wireless after the motherboard, cpu and ram upgrade adapters

  As the title says, I have recently updated my card mother, cpu and ram (increased from Asrock extreme6 z77/i7 3770 k/Kingston 8 gb hyperx for EVGA ftw/i5 z97 4670 k/g. Skill ripjaw x 16 gb). I always use the same installation of Windows 7 64 via the same SSD. After I was installing new equipment, I used the disc that comes with the motherboard and installed all the drivers that were available (twice, just to be safe). All the features of the OS I had before seem to be there except to exit Device Manager to correctly install the drivers for my wireless (Linksys AE1000 and TP Link N900) adapters. I downloaded the current driver for the Linksys Web site and I have the disc for the TP-Link and I tried several times to install, but keep the same message ' Windows found driver software for your device, but has encountered an error trying to install it. Device Manager recognizes the device and it is not any question of State symbol (IE yellow triangle, etc.) that is displayed in conjunction with an adapter. I tried disable/re-enabling and uninstall/re-installing times and keep having the same problem. I tried to search in several forums of people with similar problems, but none of the resolutions seem to work or are suitable for my situation. Any help that can be provided would be greatly appreciated. Thank you.

  Hello

  When you upgrade your motherboard, cpu and ram, drivers for particular devices may not be related to other drivers. That's why I suggest you to install all the drivers for the chipset from the manufacturers website and see if that helps.

• Change of motherboard, cpu and ram by using the version of upgrade of windows 7

  I plan on upgrading my motherboard, cpu and ram. I am using windows 7 Home premium that I have updated from xp using a retail upgrade disc that I bought from a company of national computer supplies. Should I have any problems activating this the wrench that came with the drive. I have read several posts on this but can't seem to find a definitive answer. Help, please!

  Well, Windows XP and Windows 7 are versions of upgrade as you claim, that means XP used a qualifying version of Windows that is pre-installed with the system used the upgrade of the command.

  This means, Windows XP and Windows 7 are both related to this version of Windows that came with the system. Because the copy of the original Windows supplied with the system would have been an OEM license, which means, Windows 7 and XP have more rights to transfer if you change the motherboard.

  You can always try a clean install with upgrade.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Satellite A100 - 495 (PSAA9) - CPU and GPU upgrade

  Hi all

  I have a few questions.
  I have a Satellite A100-495 with 2 GB of Ram, Core2Duo 1.83 GHz (2 x; T5600) and an NVIDIA Geforce 7600go.
  I want to spend the CPU and the GPU. Is this possible?
  I don't want to do. I am looking for a store (if possible in Germany) that can do this.

  If its possible, what it costs? And what store can I speak?

  If this is not possible-> why? It is fixed; It getting too hot?

  What solution do I? I don't want to buy a new laptop.

  Kind regards
  Dave

  Update CPU and GPU on laptop computers is complicated enough or is not possible. At first, I must say that GPU is part of the motherboard and graphics card can not be upgraded at all.

  What about the CPU upgrade? Toshiba authorized service providers will not do that and the CPU upgrade is not supported. Few people on this forum have talked about CPU upgrade, but for me the risk is too high. All hardware components are adapted to the work well together and also to reduce the risk of damaging the material. The BIOS is also suitable for the specific hardware configuration. The values of the fans are also tested and there is no risk of overheating.

  Change CPU, you will get no more powerful laptop. Modern processors are powerful enough and a few MHz more won't do anymore difference. What you can do is to increase the RAM to the maximum level - 4 GB. That s all what you should do and your laptop runs a lot faster.

  Also be careful on the configuration of the operating system. This will also help make your laptop faster than before.

  By the way: for operations you need more power? What you want to do with your laptop?

• High temperature CPU and core on Satellite A100-680

  Hey guys,.

  I'm having a problem with the temperature of my A100-680. It holds an average base about 80 degrees Celsius (176 degrees fahrenheit) temperature and a temperature of CPU from above 70 ° c (158 degrees fahrenheit). I had the problem since the purchase and got it to clean the radiator and renew the cooling paste once without any significant improvements. This is not the normal idle temp, it can?

  Anyone else having the same problem?

  Thanks in advance!

  Thomas

  Hi guys,.

  Sorry, but is your accident of machines or you get BSOD? Is performance not well or what?

  I mean, I have an A100 with a T7600 and the machine is like yours, but this is normal since these powerful CPU and GPU creates a few h.e.a.t..

  So, if your machine shows no such problems I described then I really Don t know where the problem is.

  Welcome them

• Can satellite L300-1AS - I put the CPU and the GPU?

  Hey

  I bought what above, mainly for the games but also for use with the software of music, at the end of 2008, but found that the graphics card is a big drawback. Is it possible to upgrade the graphics card GeForce or NVIDIA update?

  There is also a processor Intel Core Duo... is a feasible way of this upgrade to a Quad Core?

  Cheers in advance!

  I can confirm the message posted by Luke.
  The upgrade of the GPU is definitely not possible.

  Upgrading CPU is more delicate.
  Usually you can remove the CPU from the motherboard but no one can say how the laptop would go after these updates.
  The main issue may be the higher heat dissipation which would be created by stringer CPU. The higher temperature may affect the functionality of the laptop.
  In addition, there could be a problem of compatibility between the BIOS and the new processor.

  The BIOS was not designed and tested not with different CPU and this could be a problem.

• Equium does not start after Exchange VGA and motherboard

  Greetings.
  I have a satellite that were replaced VGA & mainboard, but it does not start. There power correctly and power & switch are turned on but there is no image on the LCD or external. HDD led flashes but nothing more.

  I tried a different CPU and RAM modules.

  In other threads with similar problems seems to be a problem with the screws but I tried to remove all the, winding or change.

  Im stuck with this and have need of any kind of help.

  Thank you

  Try this:
  Remove the battery and the AC adapter, wait up to an hour, plug in the battery and the AC adapter and try again to restart the laptop.

  In my opinion, a problem with the motherboard. The new mother is maybe defective.
  You have replaced parts by yourself?

• Acer aspire problem vn7 - 591 g nitro with high CPU and GPU temperatures

  Hello! I recently noticed some issues (lower fps) performance when you play semi demanding like cs and Overwatch, although pretty much the lowest settings. I went to download CPUID (software to monitor your hardware) to check my temperature and I noticed that I reach 90 low to high (depending on the game) when I play.

  I thought it might be dust or something inside so I removed the keyboard of the laptop part and used some canned air to remove any dust I could reach (without removing the motherboard). I also managed to get your hands on a laptop computer, cooling rack. The problem is that all these efforts really solved the problem. Just a slightly lower temperature on the GPU and about the same on the processors. I'm starting to wonder if it could be the thermal paste, which need to be replaced? I had the computer for a little over a year now. Does anyone else know similar problems? Help or advice would be appriecated.

  Hello

  The CPU and the GPU are designed to operate at these temperatures. If they are too high they will be the butterfly, and if even this does not then at some point they just instantly shut down to avoid any possible damage.

  Changing thermal paste may improve performance, but you will only get lower temperatures. Your CPU/GPU will probably run at higher clock speeds and will not throttle, but temperatures will be in the same range. But in my experience if you can change the thermal paste, you should.

  Also, you can use the laptop fan control that has the configuration for 591g and it may further increase the fan speed. I think, from the factory, the maximum speed of the fan is just about 60-70%.

  https://github.com/Hirschmann/NBFC/

• Upgrade of Acer Aspire 5738 G CPU and RAM?

  Hello! I want to spend the CPU and the RAM of the Aspire 5738 G. The Chipset is PM45. Common current C2D [email protected] and RAM CPU is 2x2gb Kingston DDR2 PC2-6400 to 400 MHz. I'm confused because some sources claim that he cannot be upgraded

  but official intel PM45 docs say. I want to put the 8 GB of memory and if possible some cpu faster. Thanks in advance!

  PS: I found an answer here on the RAM upgrade. It is said that it can be improved with two 4 GB DDR2 modules. But what is DDR3 and CPU?

  Hello

  I found your laptop specifications:

  LX. PEX0C.015 - ASPIRE AS5738G-664G50Mn

  I also found other specifications on this one:

  1 - motherboard:

  MO. P5601.011

  BD OF THE HAND. TELL. PM45 WO / 3G (only DDR2)

  2 - memory:

  Up to 2 GB of DDR2 667 or 800 MHz memory per slot, expandable to 4 GB using two modules soDIMM.

  3-original processors:

• DV7-1210eo Black Screen with CPU and graphic Error Codes

  I'm running out of ideas on how repair this laptop so I thought I would ask here. Like so many other people with these portable mine seemed to go right after my warranty expires. I went to power on one day and he presented that a directed graph code error with a black screen. Instead of trying to fix the original slide myself I thought it would be best to just replace it. After the new Board of Directors came and I reassembled it all has been great to work for a few days. I went to power on one morning and he presented the same graphics code error as before. I then reset and tried again, but this time that he gave me the CPU error instead, after 15 seconds or later he would begin to switch between error a CPU and graphics. I assumed that the jury who sent was defective, so I sent a replacement. Once the replacement card has been installed it would always give me the same errors, sometimes it would be the graphics and other CPU.

  I was told the jury that I sent worked great and replacement has been tested before it was sent, it even came with the results of the tests to check. I tried to replace the CPU and memory with a work known and same notebook AC adapter, which does not seem to help.

  If anyone has any idea as to what could be the problem I would be acknowledging the entry.

  Thank you

  I want to just update to anyone who seems to have the same problems as me.

  I finally had time to replace the CPU and specifications works fine now. It seems the controller memory on the old CPU came out and was causing memory to not be detected properly and causing graphic errors. Before you spend money on a new motherboard, you may want to consider the processor as the problem.

  Now if only I can figure out how to keep it from cooking itself...

  Thanks for all the help,

  Domo

• Pushed a little CPU and now a blue tint

  I was vacuuming in the room where is my cpu and bumped slightly with the void and all of a sudden my monitor has developed a blue tinge.  Obviously, untouched.  I tried a few options to repair Windows, but they had me try to adjust my monitor, which I think is the problem.  Any ideas?

  Monday, June 8, 2015, 22:00:40 + 0000, Rick the librarian wrote:

  I was vacuuming in the room where is my cpu and bumped slightly with the void and all of a sudden my monitor has developed a blue tinge.  Obviously, untouched.  I tried a few options to repair Windows, but they had me try to adjust my monitor, which I think is the problem.  Any ideas?

  Apparently, you think that the term "CPU" is a synonym for "computer". It's
  not. A CPU and a computer are two very different things. The CPU is a
  small chip which is the case of your computer, on the motherboard.
  Yes, it's the most important chip in the computer, but it is not the
  the computer itself.

  "CPU" is in fact an abbreviation, not an acronym. "CPU" is synonymous with
  "Central processing unit". In modern personal computers, the CPU is a
  relatively small chip, an integrated circuit. It sits on
  the motherboard inside the computer case. It is not the case
  itself, it is not the total computer, which includes the case and
  all that it contains.

  I don't know how incorrect practice began the appeal of the whole
  the "processor" of the computer, but here's my guess: when you buy a computer, you
  normally get the deal and what is in it, with a monitor,
  keyboard, mouse and perhaps a printer. All of these devices
  connect to the ports on the case. Because everything connects to the case,
  the case is "Central" to everything, and the term "Central."
  Processing unit"is sometimes badly understood and poorly applied to it.

  So you might not have pushed the CPU. Please be careful
  not a misuse of the term, because if you do, you are likely to be confused
  those who try to help you and get the wrong answers.

  About your problem, my guess is that the cable from the monitor to
  the computer has loosened. Please make sure that it is connected tightly.

• Material: What i7 processor and motherboard can pay me for my construction Assembly of the machine?

  I work with the PC. I am running with a first-generation i7 980 x, a processor in a motherboard that is nice, but dated from 6. I was not told that the second generation i7 half price was a processor much better for video. Nevertheless, I held five years after my investment.

  Recently, I wanted to upgrade and my neck of the bottle is in my hard drives. I have one zero RAID but it is only syncing Seqential reads 295 MB/s and writing 304. When I run the process on one screen and work first on the other, I see that whenever there is a hiccup during playback, and what hard drive not show up where my RAM and CPU are not.

  To set the soft hard drive configuration that I have; I wanted to set up a RAID 0 SSD some for awhile. But I've been holding. I'm glad I did I think because now I want to jump on the PCI. E 3.0 SSD. My current motherboard's PCI. E 2.0. It is also a neck of the bottle in my video card (MSI GeForce GTX 680 N680GTX Twin Frozr 4 Video Card - 4 GB GDDR5, PCI-Express 3.0(x16))

  So I want a new motherboard to unleash the potential of my video card, hard drive and RAM DDR4: Intel 750 series AIC 400 GB PCI-Express 3.0 x 4 MLC internal Solid State Drive (SSD) SSDPEDMW400G4X1 - Newegg.com

  Does anyone have any suggestions on a particular processor and motherboard should I consider? I've been watching this processor Processor Intel Core i7-4930 K Ivy Bridge - E 6-Core 3.4 GHz LGA 2011 130W BX80633i74930K Desktop - Newegg.com or this one I think I like better: http://www.newegg.com/Product/Product.aspx?Item=N82E16819117403

  Still no idea on a very particular motherboard. I guess one with several PCI. Slots E 3.0. I'll be in touch with ASUS to see if they have suggestions based on my desired material (which I have of him up to this day).

  Using CS6 or CC 2015? What the media, how many layers and what kind of effects, if necessary use you? (certainly talk about third-party plug-ins)

  If you are overclocking your 980 x now?

  East of 400 GB really enough workspace for all your files? (media, projects, zero/cache/swap and export)

  I know I am asking a lot of questions, but these things make a difference any on a few recommendations. Workflows and different tax brackets the PC in different ways.

  Recommendations of a general nature you could do now or more later:

  -If you have machines to slot/ports available in your current motherboard, there is no reason to wait for a new system add a PCIe SSD or 2 x 3 table SSD RAID 0 x (those can be convincing solutions still too)

  -Intel 750 1.2 to is on sale at Micro Center now for $649; I find this a really compelling case for that price - very fast, very reliable and compatible with multiple systems (M.2 solutions are more cutting edge, running more hot and seem to be less reliable in reading the user comments)

  -Not the fastest or most recent, making x 2 or x 3 (or more) RAID 0 arrays with the best drives SSD (Micron, Samsung 850 Pro, Intel 730) is a large enough to go so way too long as you have enough ports SATA; Here, too, you could do it now... a SSD RAID 0 array could still be hot fast when compared with your rotation on your old SATA ports

  -If you run CC 2015, it seems to me that Adobe has been out more our GPU if you always use the CS6. So, if you're on 2015 CC, you can upgrade to a 970 GTX or better and continue to use the GPU in a generation of new and future. BTW, I seriously doubt that your GPU is limited by PCIe 2.0, its just not that fast!

  New recommendations to build:

  -Think that Asus x 99 build (Deluxe, x 99-e WS or V Rampage)

  -Intel i7 - 5930 k or i7-5960 x (quick, easy to overclock 8 strands)

  -32 GB of RAM if only use body (64 GB so also use After Effects)

  -new GPU (GTX 970, 980, or 980-Ti)

  -If you do not upgrade to a 99 x new system (that's what I would say from a generation previous fast 6-core CPU), then Samsung 950 m2 512 GB drive can be the way you want to go

  -personally, I like the speed of the drive, but find 400GB, 512GB a little limiting

  Kind regards

  Jim

• Updated new Alienware 17 with CPU and GPU

  Hi all

  I would like to know if it is technically possible to upgrade my new alienware 17 (i7 4800 and gtx 770 m) with a view to graphics card like gtx 780 m and a microprocessor quick as processor 6 or even 8 if these are forthcoming. The motherboard will support the cpu and the gpu? And wil cooling well then?

  Thanks in advance and best regards,

  PFYAAA

  PFYAAA,

  The motherboard supports this upgrade.
  * No. we do not support the kernel following Dell OEM 4 processors:
  C8HRG i7-4930MX 3.00 GHz
  HDX3D i7-4900MQ 2.80 GHz
  M 036 4 i7-4800MQ 2.70 GHz
  86XWW i7-4700MQ 2.40 GHz

  the cooling system which would allow?
  * Because we never test them, we do not know.

  with a higher graphics card?
  * You could pass to the GTX780m of the Dell OEM.
  2K0KW Nvidia GeForce GTX780m N14E - GTX 4 GB of GDDR5 memory with support, thermal pad
  YP26V GTX780m GPU thermal Module right 100w

  and even a core 6 is already available in configuration alienwares 18.
  * Where do you see that? I have seen that the AW17 and the AW18 offer the same 4 core CPU?