Temperature of closing in on Satellite M30x

Similar Questions

• Satellite M30x-143 - ATI Catalyst 7.9 cannot be installed

  How am I supposed to install the driver Catalyst 7.9 I get an official driver from Ati and it say, it cannot be run on my computer. The driver on the toshiba site is 7.71 (atitool profile 7.71) but Sisoft sandra 2008 info gives the driver is 6.14, when will it be updated?

  Post edited by: Rudinho

  Hi Rudinho

  If you visit the download page for manufacturers of graphics cards, you can find instructions, for mobile computing, drivers are provided by the manufacturers of portable. Unfortunately the graphics drivers cannot be updated so often than on desktop computers.

  The reason for this is simply. With the new graphic card driver will be forced to run on the limit and the result is high temperature. High temperature can be responsible for suddenly shut down or even damage the hardware. Because of this laptop manufacturers should treat with great care. Can you imagine what will happen if Toshiba offers the driver and the result is damage of graphics card?

  Satellite M30x is old enough for laptop and I do not think that the driver will be updated. The same situation is for my old Satellite P20.

• Type of keyboard on Satellite M30X-130

  I need to change this keyboard---> COMPAL P/N PK13CW10180 - Darfon P/N 99.N5682.30E - MODEL NSK-T430E - K000016100 WK442K - ITALIAN LANGUAGE
  but on the internet, the models I found that they have these characteristics---> MODEL MP-03436I0-698 - P/N PK13CW10280 - K000016100 WKA16K - ITALIAN LANGUAGE

  The only difference I've seen looking at the photos is the dish that connects the keyboard to the motherboard.
  My doubt is about the feature and if they are hardware compatible.

  Can someone help me in this choice?

  Thanks a lot for all

  Michele

  Satellite M30X is old enough laptop model, so I think that you should have no big problems to get the new keyboard. I had similar problem on my old Satellite M70 and I bought the new keyboard on eBay.

  At this time keyboards were quite similar and a keyboard could be used on some models of laptops. eBay is the right place to find different hardware parts for old models of laptops and keyboards.
  Unfortunately I can't help you with this keyboard control, so if you find the specification that says that it is compatible with M30X you can buy it.

  Don't spend a lot of money for it. as I've written before on eBay you can find keyboards for reasonable price.

• Update the driver for graphics card for Satellite M30x

  I need to update the video card driver in my Satellite M30X (ATI mobility Radeon 9600/9700). Where can I find the latest version?

  On the toshiba support page, there is only an older version (dic.2004). I already tried to install a feeding at ATI.com but failed (suddenly stops and says that my system does not support this driver). I really need this update...

  Please help me

  Hello

  The driver from the ATI site will not help you. It is generally not possible to install the original graphic drivers from sites of s card on Toshiba laptops manufacturer.
  The Toshiba own graphics drivers are a bit modified and not the same as the original ATI drivers.

  However, the Web omegadrivers.net site provides drivers for ATI and NVidia chips and to my knowledge, it should be possible to install these drivers on your laptop.

  Check just

• How to connect a device to capture video for Satellite M30X 127

  I'm going round in circles trying to find a video capture device that will work with a laptop computer and would be grateful for advice. For example, I am now looking to the ' Canopus ADVC-110', although still looking autour (but not Pinnacle, which seem to have a bad reputation for the elements of capture).

  Problems include:

  1. the main problem is - many video capture devices require a "line-in" for PC for audio transfer of good quality. This laptop is not a line in, only headphones and mike catches. In addition, I also tried a few RCA pins into the 3.5 mm headset jack, and they were too small. How to solve the problem of getting audio from the VCR to my PC?

  2. the ADVC-110 connects to the PC via Firewire (and S-video), but is a type of SIX pins. M30X is a FOUR pin type. There are adapters available?

  3. Some capture programs seem to require a huge capacity of RAM. A laptop will be adapted to do the job? (I just want to capture old VCR to PC vhs tapes, and then burn it to DVD with Nero 7 or similar).

  Thanks in advance!

  Hello

  You are right! You must use an external device for the transmission of signals to your laptop. I put t know where you have this info but I have good experiences with Pinnacle product. I used the USB data transfer.

  "Canopus ADVC-110 is not known to me, but I put t see why this shouldn't work well." Use made software for video capture and there should not be any problem.

  The only thing is that, after registration of video equipment together must be prepared to burn and the unit need a lot of power to do this well und fast. When you buy it and to use on the way I recommend to extend the RAM to 1 GB.

  Compatible memory modules for your Satellite M30x are:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Satellite M30x not recognizing not all USB ports

  My Satellite M30x has recently ceased to recognize all USB devices are connected that he, being a huge super biff computer I can only assume all my USB ports are totally exhausted.

  If anyone has any other theories id be more than happy to hear... Thanks :)

  Hello

  Something similar happened on my laptop. The laptop has stopped to recognize the external device (USB HDD). Someone told me that it happened because I used the safely remove. Usually, if you want to for example disconnect the USB HDD or USB key, you must use the remove before disconnecting the device from the laptop.
  I just deleted all ports USB device and Manager after restarting the laptop operating system recognized all the USB ports again. Further, I have connected my external HARD drive, and it worked!

  I put t know which external USB devices you use, but sometimes the machines cannot be allowed because the ports USB don t provide enough power.
  In this case, you can disable the mode without power failure in the USB hub properties in Device Manager.

  Good luck

• How to find the serial number of the Satellite M30x

  Over time, serial number has worn away from the bottom of my Toshiba Satellite M30x. is there another way that I can know what it is?

  I m not 100% sure, but maybe you can find the serial number in your document that were shipped with the laptop.

• Satellite m30x: keyboard for linux driver

  Hi all
  I have a satellite m30x running Linux. I would like to know if anyone has a driver for the keyboard on the left control the cd player.

  Thank you.

  Hello

  Here are some interesting sites of linux

  http://www.Linux-on-laptops.com

  http://newsletter.toshiba-tro.de/main/index.html

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  There are hardware compatibility lists...

  Bye Bob

• How to activate the WEP to a Satellite M30X?

  Hello!
  I m working on a new wireless LAN. In fact it is not protected, because I didn t, how do I activate the WEP on my laptop (Satellite M30X). I didn t find the menu in my system (using Windows XP) to activate the WEP.
  Activate the WEP on my wireless router is not a problem.

  Thanks for your help! :-)

  Hello

  WEP can be enabled in the properties of the network connection Wireless Wireless Network tab. Under preferred networks, click on that and click Properties. You will find the WEP setting.

  Good bye

• Satellite M30X: Trojan horse - total Formate with recovery disc?

  Hello

  I had a Trojan horse on my Satellite M30X. My Antivirus deleted, but every time I've been connected to the Internet, it appeared again. Not connected to the Internet it doesn't give me any problems. As I couldn't get rid of him, I backed up all my data and do a fresh install from the recovery disc. As long as the button for LAN wireless is disabled, everything works fine, but just a little while, after I turned on it, I get a blue screen. When I restart my computer with WIFI turned on, it produces a blue screen before Windows is properly loaded, even during installation. I tried restoring 3 times, but it's always the same result.

  1 is it possible, that the Trojan horse destroyed things of the pre installation?
  2. I can't choose to make a formatting during the recovery process. All data are lost, but I feel that's not formate the hard drive correctly, when everything is destroyed. It crushes just stuff?
  3. is there a way to make a good formatting, then install completely new Windows?

  It is not a problem of my WLAN card, internet being no problem under Linux.

  Thank you for your help

  Todier

  Hello!

  If you use the whole HARD disk Toshiba Recovery disk will be formatted so if you have any virus or Trojans on your laptop, they will be also deleted.

  But what BSOD code are you have? Are you sure that's the reason why the virus?
  You have the same problem if you connect a network cable to the laptop?

  Good bye

• The BIOS on Satellite M30X recovery

  Hello.
  What is a procedure of new right flashing BIOS for Toshiba Satellite M30X-118?
  Thank you.

  Visit http://www.toshiba-tro.de/biosinfo/ and Notebook BIOS FAQ section

• Satellite M30X: battery load stop

  Hello
  I have a satellite M30X laptop. It is two years old and the battery stopped charging but it works very well through the AC adapter.
  I bought a new battery, but it doesn't charge either.

  Can anyone throw any light on this for me please?
  The orange light is lit to indicate that he is in charge, but neither batteries receive the load for some reason any.

  Thank you

  I put t think that it s a connection issue because as you say in your ad the laptop works well with the main power supply.
  I guess there could be a malfunction of the card maybe something wrong with the electronics

  PS: Did you buy a battery compatible, right?

• BSOD 0xC4 appears on Satellite M30x

  Hello

  Since yesterday I have Blue Screen Of Death, a few minutes after the beginning of my Satellite M30x. The error code is 0xC4.

  Sometimes IRQ_NOT_LESS_OR_EQUAL. I used the CD to reset the default settings, but now the image is the same: blue screens, until Windows has finished starting.
  But if I use the F8 key to get the protected mode there is no problem. Please help me solve the problem!

  On a Switzerland Toshiba site I found information (in German) that produced M30x tend to restart:

  http://ch.computers.Toshiba-Europe.com/innovation/de/generic/PRODUCT_UPDATE_SAT_M30X_CH

  Thank you very much!

  Hello

  I think you should check if the BSOD issue could be resolved using new memory modules RAM.
  I remember my old laptop had a similar problem. The OS crashed and nothing has worked. The question was about the faulty RAM module.
  I first checked how the laptop would be using RAM that one alone. This helped to discover how faulty RAM module.
  Then I replaced the RAM and re-tested

  Since the notebook then run as it should.

• Satellite M30X: Screen doesn't work after sleep mode

  I own Satellite M30X (model) after I left the laptop on while awhile, the computer went on standby to fashion. When I turned it on, the screen does not work, everything else is ok. I use the external monitor to the laptop. Everything seems to be in the order outside the screen. I did a system recovery and still the same problem. I don't know if it's a hardware or software problem.

  I know the screen works, because you can see roughly. It seems to me that the screen is always on standby.

  Is there anything I can do to fix this problem?

  Hello

  @marc.andres: If you n t no contrast on the screen have so try to use the FN + F7 key

• Satellite M30X stops shortly after starting

  Hello

  I got my Satellite m30x on repairstation because the charger was broken.
  Today I get back.

  But when I boot Windows XP home, after a short time, 10s, it turns off. Non-stop, just next door.
  I used to make State delivered, but same problem recovery cd.
  This Helene I run it in safe mode and it works very well, but is not normal.

  Seems to be a hardware problem. I don't think it's a driver problem, because it happened even with recovered resh system. So I think that some hardware is broken.

  Someone know this problem, or could tell me, what to do? I try to start with throw newspaper and view the log file, maybe this will help you.
  If nothing helps, I will bring this back to maintenancer Monday :(

  thx anyway

  Hello

  If the laptop works fine in safe mode and not in normal mode, so it could be a software malfunction.
  In safe mode, the operating system uses the standard drivers and don t charge all services.
  But as you suggested the laptop has been repaired. I think that your warranty is valid and the best way is to contact the technicians again.