Satellite M30X stops shortly after starting

Similar Questions

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• Satellite M30X-122 does not start after upgrading memory

  Hello

  I want to upgrade the RAM in my Satellite M30X 122. Correctly my NB contains 2x256MB.
  I bought a GB 1 333 MHz. Cl2.5 module PC2700 (corresponds to the former, but more grand ;-)))
  Now I build in the module, but after the build-in system is dead.
  It doesn't show anything on the screen (after pressing the button one)).

  Does Anyboby have some tips?

  Thank you very much
  Peter

  Hello

  Toshiba has recommended the use of these memory modules:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Well, the size of 1024MB should be compatible. In this case, it s not a module size.
  Have you tried to get into the BIOS? BIOS recognizes the memory module?
  Maybe the module is broken?

  In my opinion, you should check if the module memory works on a different unit. If this module works correctly on another unit if your M30X doesn t support this module of memory and you need one another.

• Satellite M30X stops unexpectedly

  My laptop started to stop dead without warning, even with a battery and during loading of the power outlet.

  No downtime, no low battery beeps, no alert - just screen shuts off and the power light turns off. No idea what this may mean, or whatever it is I can run for more information?

  Immediate departure after a crash screen displays 'Windows stop not properly', but 'Start Windows normally' works very well.

  Maybe overheating! What do you think? Satellite M30x is pretty old laptop and perhaps it should be properly cleaned. Stops dust atop the cooling grill, process cooling and the material may be too hot.

  Turn off suddenly without warning typical results from overheating.

• Satellite M30X-111 died after about 15 sec after power to the top

  Hello
  My M30X 111 died after about 15 sec after power upward. The blue light comes on, the fan starts and then turns off & the dies machine - however, the blue switch remains on. Then I have to keep the power button up to swith off the machine.

  I can't go as far as the BIOS and it does not start from CD, etc.

  Thanks in anticipation,

  Hello

  The laptop goes to home Toshiba screen?
  If yes there is no hardware malfunction but perhaps something wrong with the software.

  You suggested that it of not possible to enter the BIOS. How have you tried to get into the BIOS?
  As far as I know, this unit uses a Phoenix BIOS so you must press the F2 key immediately after switching on. Press the "F2" key several times to make sure that the option has been enabled.

  The alternative to boot from the CD/DVD drive is using the C key. The same procedure here: press the C key immediately after starting the laptop.
  (the CD must be inserted before you start)

• HP Envy 15-j119so: Envy 15-j119so stops immediately after starting

  My 7 month specifications stops immediately after startup. Briefly, it shows the start screen with the message "to initiate the automatic repair" before to stop completely. The laptop is brand new and I have not experienced problems before today.

  Would it be a virus or a motherboard problem? In any case, if you can help, let me know!

  Thanks in advance.

  Sounds like a hard drive problem possible. Have you tested with the F2 System Diagnostics? Immediately after switching on at startup by pressing the ESC key. A menu opens where F2 is an option. Press F2.

  You are still under warranty. HP support a call.

  If you live in the United States / CA, coordinated HP here.

• Satellite Pro A300D down hot and stops shortly after. Help!

  Hello together,

  3 weeks ago, I bought the Satellite Pro A300D laptop. Since the beginning, I have the problem that the laptop gets hot and stops less than an hour!

  I'm not running any application of high performance and I keep the left side of the free laptop so that the hot air can get away! I already cleaned the heatpipe using a vacuum cleaner.
  It could not be! I need the laptop for work and that it is impossible...
  What can I do? Should I send him?
  Help, I'm grateful

  Frank

  Post edited by: DerVogel

  There could still be dust stuck in the radiator, but you say that its only 3 weeks to dust is unlikely.

  Its under warranty, so take it to a Service Center for repair. This may have the thermal grease refreshed or something.

• Laptop stops shortly after the start.

  I have a slight puzzle on my hands. I was working on a DV5-1012EA which had a damaged palm rest/touchpad. I found a replacement and very well equipped. I had the laptop works well and decided to run windows update. Everything seemed fine, but after a reboot (which seemed normal after a windows update) it was decided to close. I tried a few reboots but no joy.

  I then used a recovery disk but it was in the middle of the second "loading files" and he stopped.

  I ran the diagnostic test of the system via the ESC menu and fine tested memory, it stop at Midway through the HARD drive test.

  I tried to boot up a Linux live disk with no HARD drive, but once more, it has failed.

  I booted into the BIOS, but after 3 minutes it stop new

  I tried different hard disks and memory, but it makes no difference. The system just stops.

  What a coincidence it occurred after the Windows Update? I changed the material so any conflict caused by the update wouldn't be here.

  I can't think it is overheating of the CPU or GPU, and that is why he stops? Maybe all the work of dismantling the until that replace the touchpad/palmrest dislodged the thermal/thermal heatsink paste?

  Please can someone advise me because I want to make this thing run again and return to my friend?

  Thanks in advance

  Changy

  Hello

  Yes, as I mentioned in my original post, I booted into the BIOS, but it turns off after 3 minutes. It's what made me suspect overheating. It was very quick to stop if open windows, but slower with the BIOS that requires less work CPU.

  I have removed the radiator and check the thermal paste. I'll remove it and use the new thermal paste just to be sure

  Thank you

  Changy

• Satellite P750 stops at the start of the 1st time but then works great 2nd time

  Hello
  My Satellite P750 always stops on the first time every day, but the 2nd boot works fine and no other problems...

  I press the Start button and it runs for maybe 10-20 seconds then stops... She does both on battery or power outlet...

  If I try to start again after that, it starts fine... sometimes, it gives the possibility to start in safe mode, or run the Startup Repair tool, but it always starts well and works normally...

  I tried to start repair when the option was given, and it is immaterial that the next day, he does the same thing again...

  Any advice appreciated, and Im a bit concerned that one day he did not start the second time...

  The laptop is only around the age of 6 months and otherwise runs great...

  Thank you

  Hello

  Recovery of the laptop back to factory settings.
  You use the Win 8 or Win 7 system?

  Usually, books Win 7 supports a HARD drive recovery by pressing F8-> fix my computer-> drive HARD recovery.

  If the same problem appears on the right after the system has been recovered, I guess there is a hardware problem and a technician must check the hardware parts.

• Satellite M100 stops automatically after about 10 min

  Hey there guys :)

  My Toshiba laptop has been powered off abrubptly and lit, it's own lately.

  When I turn on my computer laptop, everything appears fine, if fully charged battery, AC adapter / CC plugged in etc. However, after about 10 minutes of use, it will be just turn off and make some noise "zoip" or similar. Turn the laptop back on right after work, but I find it only remains on for 4 minutes before doing the same thing. Turn again reduces the time it stays on, sometimes not even go beyond the boot sequence.

  However, if I leave it alone for a few hours and come back, he's going to stay for about 10 minutes again, before going through the same process.

  I have a warranty, but I am hesitant to take my laptop because I don't want to lose my files.

  So I hope that someone here has a solution for my problem :)

  Thank you
  Osman

  Hello

  Sorry to say, but I think it s a hardware problem. This portable strange behavior seems to be a simple overheating!
  The laptop supports thermal protection to prevent the equipment from damage.
  If the temperature rises to a higher level, that the laptop stops automatically. It is a fact and nothing unusual in this case.

  Especially the fan cleaning helps but sometimes the laptop must be open for a professional cleaning. But beware: I n t recommend opening or removing the case! You lose the warranty!
  Maybe an aspiration would make it.

  Anyway, you said that you will not lose the data on your HARD drive. Well, I wonder why you n t create a backup of data, you can also remove the HARD drive and connect it via external USB controller on the second PC and can save the files to the other HARD drive.
  After this procedure, you must put the HARD drive in the laptop and try to reinstall the operating system.
  If this does not help, I would recommend taking the guarantee.

• Satellite A60 stops automatically after about 1/2 - 1 hour of use

  Hello

  My PC automatically stops after about 1/2-1 hours of operation.

  Can you help me?
  Thank you.

  Hello

  Sounds like overheating
  Have you noticed a higher temperature?
  High temperature may affect the pieces of equipment like the CPU, RAM, GPU

  What do you think of this?

  The A60 is a little old, and I think that there could be dust inside checking the fans If you can remove the dust using a jet of compressed air.
  This should help to decrease the temperature.

• I get a 0x000000003b System_Service_Exception shortly after starting... (graphics driver as possible, external drive possible?)

  Not quite sure the cause.

  I was in the shower, my wife tried using my computer and he went to two monitors go black screen. I hardbooted he took.  When he started my vga monitor showed the charger of the bios, the loader of windows, then double black screen for about 10 seconds and then it restarts.

  I reboot with only the vga is plugged, I started having chkdisk running on one of my external USB drives.  I'd get to the user interface of connection and choose profile admin / default and before the screen goes to the office is blue screen with the error above, 10 seconds passes, it restarts.

  I unplug my external drives and still only vga, (and he only ran chkdisk on just an external, not both my references external and not on one of my internals 2.)  and boot it - I get to connection ui - i can choose my profile or my profile comments/woman and he goes to the Office - until it finish loading all the stuff of taskbar, bluescreens on me, the same error and restarts after 10 seconds.

  I start and go to safemode still only vga, I get desktop on my profile but safemode is no way to really "use" a computer. It is stable, so I hope someone nice enough here can help me recover.

  More moderately Pertinant.

  Its Windows Vista 64-bit Acer
  4 GB shared video and system
  NVIDIA 9200 series card
  AMD Phenom triple core
  BESTFIT VGA resolution is 1440 x 900
  BESTFIT connection Polaroid HDMI HDTV resolution is 1920 x 1080
  The HDMI is normally my main video screen

  for these 2-3 weeks I stayed on my profile, have restarted, there a few times and everythings been groovy.
  About 2-3 weeks ago, I updated a bunch of patches, one of them being my nvidia drivers.  -THAT was a huge problem.

  I had the HDMI connected only at the time of the update. After the update - it defined the default resolution as 13xxby768.  My TV do not like this resolution and cannot evolve in it - so it glitches out my TV and says he has a resolution of 1 p. It also disabled supported dual monitor after the patch, if it is used to run monitors separate dualview.  I had to unplug hdmi, vga only in.  change it back to its best fit of 1440 x 900.  the driver blasted nvidia won't let you set resolutions for screens nonhooked upward, and it won't let you turn on dualview without these two things hung or cloneview.  so I flew over my mouse of choice of resolution area, removed the vga, plugged into the socket hdmi, clicked on a random selection and press ctrl + A to apply it. Once the monitor flickered and remained black, I knew I had an another nonscaleable to resolution, I hit down arrow, ctrl + has once again and got on my second try - a few ridiculous low resolution, then put to scale up his goodness was 1080 p best.  Since that time, I wasn't going to the profile of my wife.

  I think that its possible she hit my making usb cable unplugged the external hard drive.  Or it may have been when she has "changed the user" instead of "disconnecting" as repeatedly, telling him not "change user" he had a huge conflict with trying to keep my resolution and possibly default resolutions on their profile which has been forced by the patch (but does not explain why I can return to my office with nothing connected for a few seconds and it's good resolution for vga).

  I tried to read other messages on this forum and it seems that this may be associated with two graphics cards and removal of hard drives.  However, all the stuff on the disassembly of the drives appeared to apply to the winserver 2003, however, I could be wrong.  I wish myself a an extremely capable user but the drivers and hardware are 1up me.  Thanks a lot in advance to anyone who can help me.  If I need to do a dump or something, to give you more information, would you please tell me how to do this - I know very well my way around safe mode.

  Hello children of the light.

  Thank you for your message.

  You can check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the voice on the recording stops immediately after starting

  Hello

  I am a novice user of Premiere Pro.  I just started working with voice recording.  I did the whole upward as I understand it.  When I start recording, he immediately "finished" and stop recording, as if the record button is not "switched" on.

  Here's a clip showing my problem, I hope it's clear.

  0113.02.premiere pro troubleshooting. VoiceOver finishing immediately on Vimeo

  Thank you in advance,

  Travis

  The Voice over function looks like the faster and easier.

  Well, as you have now done using a Zoom, I'm not sure that this is the case.

• My windows fax tone stops shortly after the recipient fax tone is heard

  I send a fax with the fax from windows, I hear my tone waiting for a response. Within 5 seconds the tone that responded to the questionnaire, my cut fax tone and nothing gets by fax. Why?

  Windows XP fax is notoriously fragile.  It was poorly supported by Microsoft and is now essentially not supported.

  Did you ever send a fax using Windows XP Fax?  If so, what has changed?

  This happens with all fax numbers?  You can try fax HP testing service: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00259105&lc=en&dlc=en&cc=us

  What is the brand and model of your fax modem?  (Check the device in case of doubt Manager; Start > run > devmemg.msc > OK)

  Is your fax modem connected to a phone line, for example, must go through a DSL filter or something else before it connects to the wall jack?

• LCD of Satellite A2450 stops working after two years

  I don't see anything on the LCD screen. What is the solution? I go to the local service center and they ask me to pay $500 for test only.
  It's a shame!
  Can someone give me best suggestion for me?

  Hello

  What! They ask you only for the silver screen 500 test? Are you really sure? What service center is, would be interesting why want it so much money just to have a glimpse of your graphics hardware.

  On the other side, have you tried to connect an external monitor to see if you machine still works? You machine is maybe defective and not only your LCD screen?

  Please give some comments on my ad so that we do a kind of diagnosis ;)

  Welcome them