Temporarily disable the snap

Similar Questions

• Temporarily disable the tempo map

  I have a few events of tempo entry on the list window in different parts of the song tempo. The song is very fast, so I would save a problematic passage, slowing down to this point in the song, but not change or remove information from pace. Is there a way to temporarily disable the tempo map (and slow down the tempo required) in order to register my passage?

  Thank you

  You want to use Varispeed. -You must activate it in the command bar and it allows you to slow down or speed up the project (maintaining pitch) while maintaining some tempo events you have.

  enable it in the menu bar. Turn on... and you can set as a percentage faster/slower or bpm

• How to temporarily disable the Com Surrogate.

  Is it possible to temporarily disable the Com Surrogate? I play this game and my laptop can barely play without lag. Yet, I realized that whenever he hangs out sound when Com Surrogate is in my process in the Task Manager. Help, please

  Hello

  Thanks for posting the query on Microsoft Community. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  Game in which you try to read?

  The COM Surrogate is a fancy name for sacrificial processes for a COM object that is running outside the process which has asked. Explorer uses the COM Surrogate during extraction of thumbnails, for example. If you go to a folder with thumbnails enabled, Explorer will trigger a COM Surrogate and use it to calculate the thumbnails for documents in the folder. It does because Explorer has learned not to trust miniature extractors; they have a poor track record of stability. Explorer has decided to absorb the decline in performance in Exchange for increased reliability resulting by moving these dubious bits of code on the process of the master browser. When the Thumbnail Extractor crashes, the crash destroyed the COM Surrogate process instead of explore.

  The issue could also be some third-party programs, the origin of the problem. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• How to temporarily disable the update insert dates?

  Hello!

  DW CC on MacOS 10.11.3 2015.1

  I use "Insert date" (see: https://helpx.adobe.com/dreamweaver/using/insert-dates.html) to track the most-recent-update of content pages.  The time stamp is displayed after "Page updated:"about content. "

  I just discovered a systematic error in repeated, without reusable content in 1500 + pages. Oh!

  The solution is simple and I would like to use search and replace in DW to do the job, but I want to leave all the most recent timestamps in these pages intact, that this correction does not affect content.

  My question: how to temporarily disable the DW mechanism that updates the timestamp in the markup?

  I suspect that there is a visible JS file that implements the update, and the path to success is to temporarily replace an inert version of the same name, but before you start digging for this...

  TIA

  The file you need to disable temporarily is at the following location in Windows: C:\Program Files\Adobe\Adobe Dreamweaver CC 2015\configuration\Translators\Date.htm. He will be in a situation similar to Mac OS X in the Applications folder.

  If you use an earlier version of Dreamweaver on a PC running 64-bit Windows, see C:\Program Files (x 86).

  Date.htm contains two JavaScript functions: getTranslatorInfo() and translateMarkup() you need to temporarily replace with dummy functions.

  Know that you will be editing a program file. Needs administrator privileges to do this. As long as you know what you're doing, it should not cause problems, but you do at your own risk.

• Temporarily disable the option "maintain synchronization information".

  I'm trying to temporarily disable the "Maintain synchronization information" option in the category remote info of the Advanced view of the Site Definition dialog box. When this option is in DW CS6?

  When you click Control Panel servers, you should see all the servers that you have defined for the site.  By habit, I appoint my remote site definitions and test, so I know who is who.  You may have neglected to do.  If the names you see may be Untitled Site 1 or Site 2 Untitled.   Simply click on everything you see. Click on the pencil.  Click the Advanced tab.  Now that you see it?

  Nancy O.

• Disable the snap on the grid of numbers

  I have a late 2009 27 "iMac running the OS X Yosemite 10.11.3.

  I use version 3.6.1 numbers and Pages version 5.6.1

  Where can I turn off the snap on the behavior of the grid and smoothly to an object exactly where I want that he shook to the top or to the bottom of the grid?  I have not found any literature that says how to disable it.

  Any help would be appreciated.

  Thank you.

  Number, select the menu item "numbers > Preferences.

  

  Select the segment "Rulers", then uncheck all the boxes "Show Guides... »

  OR hold down the command key while dragging to temporarily turn off the guides

• Can I temporarily disable the password saving and then reactivate without losing my passwords?

  Currently, I am producing a video screenshot to ask my users on how to complete the automated process of 'forgot password'.
  I want to just disable the password save dialogues while I save the screenshot.

  However, I don't want to lose all my passwords/connections in the process!

  Many thanks and best wishes,

  Lachy

  Another idea is to create a separate profile to Firefox for demos. It's a separate Firefox settings folder that is saved along with your main profile.

  A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It should also have databases of completely fresh settings and cool a cache folder.

  If you want to try it:

  Out of Firefox and start in the profile using Start Manager > Search box (or run):

  firefox.exe -P
  

  Do not delete anything here!

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button to create a profile, assign a name like Clean2015 and ignore the ability to move the profile folder. After you create the profile, select it and start Firefox in this profile.

  One of the advantages is that none of your history shows in this profile.

  When you return to the Profile Manager, you might be tempted to use the button to delete the profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• How can I temporarily disable the HP Support Assistant?

  I have a laptop HP g6z with Win7 Pro (64-bit).  I often use the command line, but when I press F1 to retype the characters from the previous command, the HP Support Assistant appears.

  I don't want to remove the Support Assistant, simply disable it temporarily.

  Thanks, Terry

  You need not turn off the HP Support Assistant.

  To reuse commands already typed on the just command line use the arrow, not the F1 key key!

  Whenever you type it will travel the already typed commands. Stop at that you need.

  This keyboard thing is used BACK for years.

• Temporarily disable the CS6

  Yes, I have two perpetual licenses to CS6 that have been purchased for two employees. Accounts are saved for me because I was the buyer. We learned by our IT department that the machines would have to be re-created. A couple of problems here.

  The installation of the system is on a Government computer, so a lack of administrator rights are preventing employees and even the service deactivation (they have not access to internet when using their permissions.

  The other problem is that trying to get help via chat to temporarily suspend activation is not possible with respect to more than a week, cat told us that it is closed, Yes, one open 24/7.

  We try to meet the rules of Adobe and treat our software correctly. A machine has the second installation on a laptop, but the other licence has only one installation.

  How can we get help from Adobe? We prefer a real person, but a robot will do. Note: this is not a creative Member cloud so we can not turn it off via our account management.

  Help, please

  Sharon

  Adobe-blocked

  As far as I know, an administrator account is REQUIRED to install and activate Adobe programs... so if you are able to disable, you will have a major problem trying to install and activate without an Admin account

  Also, since CS6 is now out of use, I think I know that Adobe will not be providing any support installation or problem... other people are able to get to the online chat to get the number of activations of software reset, so I don't know why you can't

  Well well... an idea... you are behind a firewall or you connect to the Internet through a proxy server?

• How to disable the snap

  Hello

  Sorry if I phrased my question like that - I'm not sure what to call it... I created a music video and need to sync several video clips with audio. Problem is that I can't move the video clips along the timeline with the precision that I need. For example, in the screenshot below, I need the pliers to start to the where the yellow arrow points. However, I can only move at the beginning of the clip at 00:00:02:20 or at one of the markers on the timeline. Is it possible to disable this, so I can move my clip exactly where I want to?

  see you soon,
  Fred

  

  This isn't a limitation of Premiere Pro - it is a reality in video.

  Professional shoots blocking for the music videos will use genlock for each camera door opens and closes at the same time with precision. The editor can then simply move the audio in cradle mode until it is aligned with the first clip, and everything else falls in place perfectly. If you have video tracks with doors there is no realistic way to align the alignment better than an image, unless you want to resample everything with optical flow to create images that do not exist. Some DPs always make music videos at a high speed (60 +) so they have finer precision in the Assembly, but be out by a half frame is not uncommon even of chart-topping artists. It's even worse when the talent is miming at double speed of reading. There is a reason that the drummer is not well in the final Assembly

  In your case, the fastest way to get a precise timing will be cut the audio for each video transition and boost cradle to fit the video track currently in view. No one will notice a 1/100th of a second bevels. It is often easier to do at the hearing, given that you can paint on the seams if need be, stretching the clips rather than their splicing. Simply export your video editing locked and that put in work space multitrack hearing as a reference sequence.

• temporarily disable the application?

  Hello
  
  Is there a way to "temporarily cut" an APEX application so that users can not access? It would be useful to do this while you upgrade an instance of Production in order to avoid users who are trying to make changes while the application is being updated.
  
  Thank you
  Steve

  Steve wrote:

  Is there a way to "temporarily cut" an APEX application so that users can not access?

  Yes, the application definition includes properties availability for exactly that.

• Disable the effect "click"?

  Hello. I'm trying to resize a layer and I get this interlocking effect that won't let me not resize to the size I want... it seems to try to match with a font that is near him. How can I disable this? Thank you.

  I did turn in a similar undesirable 'click' when you try to resize a rectangle encompassing for a harvest.  I discovered that holding the CTRL key while offset of the bounding box temporarily off the snap.  Don't know if this is related to your problem, but try quick Ctrl.

• How to disable the touch screen on the Qosmio DX730?

  I want to use the calibrators of color such as colourmunki for my graphic work. These must place me something on the screen.

  How can I temporarily disable the touch screen while I do this?

  I tried Control Panel and manual with no luck.
  Thanks for any help

  Hello

  Have you found a way to do it?
  I think that it of not possible to disable the touch screen.
  Found no information in the user manual. Maybe you can check the BIOS settings available. Switch on and press F2 to enter the BIOS.
  But to be honest, I doubt that a power option would be available there.