Tengo Windows 7, Ultimate-y sonido Higs Definition Audio device

Similar Questions

• AMD high definition Audio Device not Plugged In (HP Pavilion dv6-6b09sa)

  I just started my laptop HP Pavilion dv6-6b09sa (running on Windows 7) to find that the sound icon is a red cross next to him and he claims that "no speakers or headphones are connected. In Control Panel, it says that the AMD high definition Audio Device is not plugged in.

  As far as I know, I did nothing to cause this.

  I have already tried:

  Restore the system to yesterday at 22:00.

  Instalation of a TDI driver on the HP website, but I don't know how to disable/change/remove the old driver. I am completely ignorant of these things.

  Please help, I am at a total loss.

  Hello

  You are welcome

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54400.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Laptop of HP ENVY m6: high definition Audio Device a yellow exclamation

  Hello

  I have a yellow exclamation next to the high definition Audio Device in Device Manager. He says that I have the best driver when I try to update the driver software. FYI, the Realtek one is good. I need to fix the high definition Audio Device.

  My product number is G6R97UA #ABA.

  Please help me!

  OK, it's exactly what I thought it was in the first place... the Intel HD Audio chip.

  Try to manually install the driver that I posted as follows.  If you have not deleted the file I posted, go to Device Manager and click on the audio device HD requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp72370.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

  If you have deleted the file, download and run again the driver, close the error window and follow the procedure above.

  I see the hardware ID you posted as supported in the driver file, so it should work.

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• IN reading under HDMI output: ATI High Definition Audio device not connected not

  I have a Probook s 4720 with Windows 7 Pro. Connect my laptop to the TV with an HDMI cable worked fine then all of a sudden the next time I did I got no sound and when I right click the icon of audio, I noticed he read ATI High Definition Audio device not connected. It worked once and now it won't, Miss me. The driver is up-to-date.

  Can someone help this grueling 82 year old principal?

  I like to play the old big Bands and numbers Andre Rieu on You Tube.

  Please try download and install the latest driver from the following link, and then reboot the system:

  http://www2.ATI.com/drivers/Beta/amd_catalyst_13.4_legacy_beta_vista_win7_win8.exe

• Device Manager - unknown device + Hig Defintion Audio Device (Point of Exclamation)

  Hello

  I hope that someone can help you. The hard drive on my laptop of HP ENVY TS 15 (product number: E3S19UA #ABA) out crapped and I reinstalled Windows Enterprise 8.1. I downloaded and installed all the drivers from the HP website. When I look at the Panel, I have an "unknown device" and in the audio, video and game controllers, I have an exclamation mark next to the high definition Audio Device.

  I installed the HP Support Assistant and let it do its thing. That has not fixed the problem. When I look at the properties for the unknown device, I see the following in detail: "ACPI\HPQ6007\3 & 11583659 & 0" regarding high definition Audio, I see the following in the general tab:

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  When I try to update the driver software fo the High Definition Audio, I get a message that "Windows has determined the software driver for your device is up to date.

  Don't know where to go from here. Any help or words of wisdom would be greatly appreciated.

  Thank you

  -Val

  You are the very welcome.

  This is defininitely the driver you need and you need to install it manually.

  Run the driver again.

  Go to Device Manager and click on the unknown device needing driver.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software, and find the folder of the driver that was created when you ran the driver.

  This file will be located in C:\SWSetup\sp66078.  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If this does not work, then back to her browse my computer for driver software window and then select Let me pick from a list of drivers for devices on my computer option, then select Have Disk and browse to: C:\SWSetup\sp66078\InstallFiles\Win8_1\accelerometer and select the HP Mobile Data Protection sensor from the list and see if the pilot goes like this.

  The HD audio device is the audio device Intel HDMI which could not install when you ran the graphics driver, so run it again and if it does not install, manually install the driver using the same procedure that I posted to the 3D driveguard.

  If it doesn't, then I remove the driver and tell you where to get the driver from, as I did for the above device.

• High definition Audio Device Code 10 - device cannot start (tried all the typical solutions)

  Hey!

  Let me first, I use a laptop Aspire V3 - 772g.

  After the recent update of Windows 10, I had problems getting past the lock screen (took FOREVER to get to the point where I could enter my password) and it had been awhile, so I reformatted ('reset my PC' delete all files) - that didn't really solve my problem, so I used Rufus with an iso of Windows Microsoft to remove all partitions and start 10 REALLY cool. Since then, the laptop runs like a dream - in all but a point.

  It seems that no matter WHAT I do, I can't get my audio HDMI / TV to appear as an option in the playback devices (Yes, disabled devices is checked). Looking in the Device Manager, the high definition Audio Device has an exclamation point is to launch a code 10 - impossible to start the device. I tried to uninstall it, tried to install all the drivers of Intel V3 - 772 f page including chipset, updated my graphics driver / Realtek / drivers Intel HD audio... and yet, nothing. Ran /sfc, ran /chkdsk, nothing.

  I read something that made me believe .NET framework can be part of the issue - and in fact, I have a bit of difficulty getting the 3.5 installed / functional, but I finally did... and yet, nothing!

  Seriously, I'm losing my mind. I'll have to run my sound surround sound via an auxiliary cable into the laptop, which is sacrilege and a fraction of the quality.

  If there is SOMETHING, someone can suggest beyond the foregoing, please do!

  This problem is related to Intel HD audio via HDMI cable, if the driver is in the same package of graphics drivers.

  Have you tried to manually install the audio driver HD?

  you need to unpack the Intel graphics drivers (but no installation, you can use 7z to unzip), and then select update the driver HD audio from the Device Manager and point to the unzipped folder.

• Error code 10 after deleting high definition Audio Device

  original title: High Definition Audio Device

  Hi, I accidentally deleted my Audio high definition device on my lap top Windows XP (This device cannot start Code 10) I tried to reinstall it. But it happens with the problems encountered. High definition Audio device has a driver problem. I've tried every way, I can ut without success and I see that it is a problem of hugh with a lot. Any help is greatly appreciated.

  Coco

  Yes. Visit the link below to download your audio device.

  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=47&m=W5a&OS=17&hashedid=SNzSY2VyXFuOTPdC

  Good luck.

• Laptop of HP ENVY 15 TS: problems installing the audio driver (High Definition Audio device)

  Hi all

  My product is the HP ENVY 15 TS laptop.

  Product number: E3B65PA #AR6

  OS: 8.1 64-bit Windows

  A few days ago, I upgraded my windows to windows 8 to 8.1 windows and found that no noise from HDTV when hook up my HDMI cable however video is perfectly fine. I was completely baffled because the audio was working perfectly fine before the upgrade to Windows 8.1. I tried several solutions posted on other forums, such as install other drivers and uninstall the IDT High Definition Audio Driver and then scan for hardware changes. I checked the HDMI cable and it works very well with the other laptop.

  Device Manager is needle 2 device:

  High definition audio device (yellow own showing)

  IDT High Definition Audio CODEC

  When I open the properties of the audio device high definition, that is to show:

  This device cannot start (code 10)

  {Operation failed}
  The requested operation failed.

  If anyone knows how to solve the problem, please help me

  Thanks in advance

  Hello:

  Audio driver IDT (portable speakers) seems to work very well.

  The problem is probably with the Intel graphics driver that controls the HDMI audio.

  My recommendation would be to install the latest Intel graphics driver from the link below and see if that fixes the problem.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23714&lang=eng&OSVersion=Windows%208.1%2c%2064-bit * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

• High definition Audio device

  I just install Windows 7 to a friend on a Dell Vostro 220 and there were two High Definition Audio devices in Device Manager. When I installed the Realtek HD driver, one became Realtek High Definition Audio, but the other remained as high definition Audio Device. When I disabled it Audio in the bios then both disappear from the Device Manager. There is no HDMI on this pc. What is this high definition Audio Device?

  I uninstalled the drivers for the chipset of dell and installed from the site to intel. Now, everything is good. Thanks for help.

• I Accedently disable my high definition Audio Device and I cannot get it back

  I Accedently disable my high definition Audio Device and I cannot get it back. IDK what to do but I do not see how to reactivate it.

  Hi MarkRampone,

  Thank you for posting in the Microsoft Community, where you can find all the answers related to Windows. It seems that you have disabled the Audio device high definition and you must activate it.

  In addition to answering these questions that would help us provide a better solution:

  1. How did did you disable the Audio device high definition?

  2. What is the brand and model of the computer you're using?

  Try the steps mentioned in this link and check:

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• ATI high definition Audio device has a driver problem

  All of a sudden Windows 7 can find any Audio device.

  The troubleshooter is running a nd reinstall the drivers down.
  Problems found
  ATI high definition Audio device has a driver problem ATI high definition Audio device has a driver problem There is a problem with the driver for ATI high definition Audio Device. The driver must be reinstalled.	Not fixed
  Reinstall the device driver

  Check the audio device Detected There could be a problem with your audio device.

  I solved it by going to the registry and by locating and removing the UpperFilter = LVUSBSta.sys
  to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class
  I have an Intel mother board DP55WB with an onboard Audio device and Windows 7 Professional.
  LVUSBSta.sys is a virus, Trojan, spyware, adware.
  See http://www.file.net/process/lvusbsta.sys.html

• High definition Audio Device works not properly

  I use Windows 7 Home Premium with a generic "high definition Audio Device" that beat unexpectedly and I can't get it fixed. It seems that Windows thinks that the Audio device does not work correctly, except there is a red X on the speaker sign on my toolbar. I have no playback listed device, but there is a device under sound, video and game controllers. Its location is also "Location 0 (High Definition Audio Bus)". Please and thanks for the help!

  No, the Red Cross means no driver installed, essentially.

  Go to the site of the manufacturer of your computer, looking for support for your page, then download and install the specific audio drivers for W7.

  Re-post if it does not work. Do NOT rely on MS to do the update for you.

  See you soon,.

  Jerry

• HP Envy Touchsmart - 15-j063cl: high definition Audio Device has an Exclamation Point through it

  I have an exclamation point for my high definition Audio Device in Device Manager. Immediately below I IDT High Definition Audio CODEC (WHO do IS NOT HAVING a POINT of EXCLAMATION to).

  I installed the drivers for my laptop and still have an exclamation point. I get the sound from the laptop and my internal microphone works so I don't know what exactly this influences. The two drivers that I have installed are those below.

  1. sp63555.exe
  2. sp63407.exe

  The hardware ID for the high definition Audio Device with the exclamation point is:

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000
  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101

  Thanks in advance for your help.

  -Val

  Hi Val,

  The hardware id is audio via a HDMI connection and should be provided by the Intel Graphics Software - try to download and reinstall it from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• This device cannot start (Code 10) - high definition Audio Device AND opening. VHD files.

  Just upgraded from Vista professional to Home Premium 7.  (Which means that I couldn't have the installationl UPDATE and had to go for CUSTOM).  In hindsight, not a good idea!
  1. no sound from speakers.  I tried updated driver.  Problem is with the Microsoft high definition Audio Device.  Using T9404 of advent, Intel R, HD 400 G, 1 G of RAM.  Speakers are not muted and sound card worked fine with Vista.
  2 had a full backup in Vista immediately before moving to 7; But - guess what - can't open. VHD files for the look, or use it!
  Any help would be greatly appreciated
  Concerning
  AL

  His problem solved.  For the benefit of others in the same boat, that's what I did.
  After trying everything I could think of, I had another look at the system clean.
  Computer >
  Drive C (double click) >
  Request >
  Driver >
  Sound >
  Select Configuration, right-click, choose Run as administrator >
  Wizard starts, select 'Reinstall using your computer settings' >
  Reset.
  Hey its nice and presto!  (Which almost took off my head, because I had forgotten that the speakers were entirely upwards).
  Shows Device Manager now that one mistake, on the network controller - anyone has any information about it, what it does, what application it is associated with etc.
  Concerning
  AL