Similar Questions

• On a Linux operating system, what tools need to developed a real-time application that communicates with FPGA?

  On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?

  It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.

  Is this possible at all?

  Thank you

  Michel

  Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.

  1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:

  Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014

  2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian).  The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:

  Linaro Toolchain for Cortex-A

  3. I installed the linux drivers from NOR-RIO 15:

  Driver OR RIO 15.0 for Linux

  4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:

  Example of API Interface FPGA C OR real time Linux and Eclipse

  Michel

• a script which communicates with AI and ID

  Hello community

  I'm currently trying to wrap your head around the Extendscript Toolkit. When I write a code I specified for the program I want to use by selecting it from a drop-down list, however I want to use two different programs at the same time. I want to copy all pageitems a page in indesign, and then paste it on a new page in illustrator. Anyone know how I can have access to both programs at the same time?

  I wrote the bit to follow who seems to give me the two application I want to use, but the content of these objects is not the same if you write 'App' with for example indesign selected as target your application.

  main() {} function

  inApp var = this.indesign11;

  var illApp = this.illustrator;

  }

  If I write inApp.activeDocument the Toolbox just ignore.

  If anyone has any suggestions I'd be happy to hear.

  Thank you

  Dane

  Hi Dane

  You use VBS in the ESTK which will not work.

  The ESTK only handles javascript. The javascript code can execute vbs using app.doScript.

  The "correct" to communicate with the ID and AI way is with BridgeTalk.

  There are examples in the manual script and on the forum.

  Good luck

  Trevor

• Windows Vista cannot communicate with a lexmark printer. my computer continually refuses to send to the printer

  can someone pease help me to get my computer to communicate with my printer lexmark X 7675

  can someone pease help me to get my computer to communicate with my printer lexmark X 7675

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#tab11

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The Dell printer cannot communicate with the Dell computer.

  It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

  Jesse,

  Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

  Please answer these questions to get more clarity-

  (1) what are the other steps in troubleshooting tried by you so far?

  (2) other changes on the computer that I should know about?

  In the meantime, I have you refer to items offered on the Dell website - troubleshooting

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

  You can also have a look at the Microsoft article as well-

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Get back to us with the results.

• my laptop is divided into 2 profiles. How can I remove the 2 profiles without deleting the programs in profiles

  I want to remove the 2 profiles that divides my laptop. I wish well for my laptop one without loseing computer programs that have been added. My laptop is a Dell Inspiron 2650

  Oh

  Here is an answer from another forum posted by Rick Rogers:

  "There is no method of merging the accounts, simply choose one or.
  others and save the data of the impeachment.

  Start and connect to one you want to keep. Open Windows Explorer as
  Administrator (click right/run as admin) and take ownership of files in
  the other profile that you want to save (under your registered profile). You may need to go to start / Control Panel / folder
  Options/display/and check the box to see hidden and system files to do (if you do not, you will not miss important information - in particular about your programs). Move the
  files you want to put on your user profile. »

  There are some files that you should not move - they are documented in the following article: http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile (which is very close to what do you except that you are not from a user account fresh but one that already exists).

  NOTE: Before removing the old profile, I would make absolutely sure all your data are moved and accessible, and that all your programs work correctly.  The time to solve a problem, if there is while you still have available data - not after it has been deleted.  Frankly, I'd let the old profile sitting there for a few weeks or more, just to be on the right side (if you have the space, and I suspect you do).

  Here is more information about the permissions you need permissions in its own right and to take ownership of:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• cRIO and 9234 modules do not work or communicate via fpga with accelerometers, fpga, connected to the real-time application is also related to shared variables related to modbus slave

  Hello

  I have a compact rio, which has a 4 way frame this chassis is the three modules of ni9234, they are related using FPGAs for application in real time, then using shared variables in the low-speed loop associated with a slave modbus to communicate with the domain controllers, the nor 9234 accelerometers linked to them with option ac coupled iepe on c modules , my problem is the real-time application seems to work well even when power loss occurs it restarts without problem and the fpga written hard disk portable bin files very well, but without an accelerometer connected I get readings of low noise as soon as I connect an accelerometer to one of the outputs 10 it just goes to a fixed number (0.03125) as soon as you unplug it again He returned to readout noise, I ran a scan on the modules and get only a spike when I connect or disconnect the accelerometer, I tested voltage at the pins on the module and I get 22 volts CC which makes it more likely that the material is not the problem, but software is perhaps the cause to hang up, I join the project and files for your perusal. I also realized a new project which, in mode directly linked scan has the module entry in the shared variable and the scenerio even once again. Help would be appretiated.

  Thank you very much

  Jason

  Whren using waveform with the 9234 acquisition, we recommend the following FPGA and RT model.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209114

  It can be extended as a datalogger with:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6388

  or using shared variables combined with the analytical engine

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9851

  The FPGA in all this, as well as the framework of RT have used successfully by 1000s of users.  I recommend giving these a try.

• Test an AIR application on iOS device, without being an Apple Developer.

  I know that it is now possible to test an application on a device iOS WITHOUT be paid member of the Apple Developer program.  How do I do that?

  The way I've done things before, was to go on my developer account Apple - device UDIDs to type and create the commissioning of profiles and certificates.  I also used TestFlight - but this also requires a paid membership.

  
  So, what's the new way?

  OK - it worked!

  You need XCode 7.  Create a new iOS XCode project.  (A simple display application - regardless)  But the Bundle ID must be the same as your white AIR app ID (the same that in your configuration xml AIR fie .).

  Plug in your device, and then run the XCode application on your device.

  In XCode, you can consult your commissioning profiles - and display them in the Finder.  You will need one for this application ID.  (I did a copy).

  Then - Keychain Access (in the Utilities folder) and find your certificate listed under 'my certificates). Export it as a .p12 file (and give it a password).

  Now, you can use the .mobileProvision and .p12 file and the password, to build your AIR application to deploy your device!

• My printer which is connected to a home group to not communicate with the computer laptop and Netgear is not connected to my computer

  Original title: 305 lemark printer s device

  My printer will stillnot communicate with the laptop.  It is in the homegroup?  Help

  In addition, my netgear will not or connect to my computer?

  Thanks in advance for your help

  Gary

  Hi Gary,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Open the troubleshooter group living:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Performance of CVI 2013 SP2 with CVI 2015 - Windows XP problem

  I see that XP isn't an operating system in 2015 of the CVI.

  Most of our PC are Win7 now, but we have some legacy units which require XP due to a limitation of external controller processor.

  Is is possible to generate executables in 2015 CVI which will work correctly with the runtime of 2013?

  Alternatively, CVI SP2 from 2013 and 2015 CVI co-exist on the same PC development?

  I would not get stuck with CVI 2013 SP2 for the future just to maintain a few predictable XP-based PC.

  Hi Shr,

  I recommend reading through this community's message: https://decibel.ni.com/content/docs/DOC-23955

  Essentially, you can develop a code in CVI 2015 but set the executable to run on previous versions of the Run-Time Engine. Note that the older version of the RTE of Side-by-Side CVI is 2012. You can indeed install previous versions of the CVI on the same computer. The shared runtime will be set to the latest version. Other versions will be side-by-side. The code is not guaranteed to work with previous versions of the RTE so be sure to test the code locally before moving on to another computer.

• Errors when trying to communicate with the server administrator

  I'm deploying fusion web app to the stand-alone weblogic server (Version is 10.3 and its hosting OBIEE), but JDeveloper (Studio Edition Version 12.2.1.0.0) reports the error below.

  [01: 27:03] - incomplete deployment.

  [01: 27:03] [SPI: 260111 deployment J2EE] errors were detected while trying to communicate with the management server.

  [01: 27:03] the requested attribute is not exposed via JMX: isDynamicallyCreated: com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  [01: 27:03] com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  However, the application server is successfully passed all the tests, the result below.

  JSR-160 LENGTH tests... success

  Tests of JSR-160 DomainRuntime... success

  JSR - 88 tests... success

  JSR-88-LOCAL tests... success

  Test server MBeans model... success

  ... Controller App tests success

  Tests of JSR-88-DEP-MGR... success

  JSR-88-DEP-MGR-LOCAL tests... success

  Tests of JNDI... success

  JSR-160 tests edit... success

  Tests of HTTP... success

  11 of 11 successful tests.

  I am able to successfully connect and deploy applications on the same JDeveloper weblogic - version 11.1.1.7, but I am facing issue with JDeveloper - version 12.2.1.0.0.

  Any help is very appreciated.

  
  

  Thank you

  Vishwa

  Hi Vishwa, there.

  using JDev 12.2.1 to create fusion web applications means that you use ADF

  12.2.1 and you try to deploy this app on WLS 10.3 which

  knows nothing about ADF 12.2.1. This means that you must

  install and configure the ADF 12.2.1 libraries running on your application

  Server prior to deployment.

  Before that review certification ADF matrix to determine the

  version minimum 10.3 where you can run ADF 12.2.1-

  http://www.Oracle.com/technetwork/developer-tools/jdev/documentation/122-CERT-2708091.html#ApplicationServers

  However, you should check if installation 12.2.1 ADF will not

  installation of OBIEE break.

  Before you dig in fact ADF 12.2.1 installation can you pack

  your application developed in JDev 12.2.1 and deploy from the admin

  Console?

  HTH,

  A.

• Import with presets developed vs developing vs Export

  Setting: Scientific Specimen imaging, using Lightroom to convert and normalize the types of images. All images are produced in a photobox, so are virtually the same as the actual sample.  The final products are jpeg and DNG images uploaded to a database.

  The camera raw image files we 'Import' means the images to Lightroom with "metadata" and "Develop" presets activated, which gives DNG files for each image.  There is white balance, sharpness and the color correction preset hysteresis in the "develop" used for import, we do no further manipulation of the image in LR.

  The fundamental Question is: are the DNG files from the 'import' final, usable, DNG of generated images, or these can be 'developed' or 'exported' to get the latest DNG?  Experimentally, we tried to do the 'export' and exported DNG files are exactly (byte) of the same size as the ones we have generated when they were imported.

  The question is we do something else that wasting time when we do the 'export' to give a second series of DNG files?

  Thank you, Carl

  Update: we did some tests and we found out, is that if you use the function "import with copy DNG with presets to develop" the generated DNG file has modifications in the develop preset applied to the image in the DNG file.

  Our experience: starting with 2 identical copies of the same RAW image, we did import with copy DNG twice - once with our development presets applied and the other without the develop presets.  We then exported the each image as a DNG, which gives an "only import" and a version "exported" of each image.  We then compared the 4 images (on another computer without LR), it is clear that there is no difference between the DNG format generated via "Import with copy DNG with presets to the point" and the images after export.

  Thus, it is our conclusion that there is nothing to gain from the export to DNG that were generated images by using the function "import with copy DNG with presets to develop."

  Note: We use LightRoom CC 2015.3 Release, Camera Raw 9.3

  We hope this is helpful to other users!

• Questions, communicate with a Windows domain controller

  I thought at first my user had a problem with Keychain and had finally called Apple Tech Support.  While on the line with Apple, we proved that it was not a question of Keychain, but rather a problem of communication with a windows domain controller. The key elements are:

  * Multiple users and Macs are members of an Active Directory multi-domain forest

  * iMac is a 27-inch, mid-2011w / 8 GB RAM

  * OS X 10.11.2 (updated 10.11.3)

  * Question appears isolated to this iMac (currently). All other iMac, Macbook Pro and Mac Pro is currently very well, several VIRTUAL LANs, and a MacBook connected to the connection of network iMacs can communicate properly with the domain.

  * iMac seems not to contact no matter what domain controller when connecting, but connects to the resources of the network and domain controllers, after login. Permissions and access to the resources appear normal after login.

  * User (s) cannot change passwords for mobile accounts or login with new mobile accounts, but accounts/passwords cached work very well.

  * iMac uses Symantec EndPoint Protection for Mac (anti-virus) – REQUIRED BY THE POLICY.  I can't change.  I have come off for the test, but must replace as soon as the test is completed. This policy is set at a level about five grades of remuneration above me.

  * It isn't really everything off the coast of the wall software installs on the computer.  The full Adobe Creative Cloud subscription is responsible, but so it is on just about every other mac I support.

  The steps that have taken place:

  (1) about a month ago, the user went to change his password, but wouldn't go to change password at the login window.  We were able to change their password on the network and could use the new password to connect to the network Active Directory controlled resources. We can connect to resources network successfully with the new password, after we connect locally with the old password.

  (2) we get the red ball (the network resources are not available) to the login window. We are basically connecting with identification and passwords cached information.

  (3) if we try to change their password through the system preferences / users and groups / / password Chang, we get the message that no domain controller is available.

  (4) initially thought that it was a matter of trousseau, and we ended up calling Apple support, since Keychain first aid is no longer available in 10.11. Apple-Advisor while that remote, showed where it was not a question of Keychain because we could not change the password on the domain, because the iMac didn't communicate with a domain controller.

  (5) while on the phone with Apple, we reset SMC and NVRAM without success.

  (6) If you are going to untie the iMac in the domain, a message that the system cannot communicate with a domain controller.

  (7) today, thinking that maybe there was a hardware problem with the ethernet connection, tried to use the private WiFi network. Still would not communicate with a controller domain, but, as if using the wired, could connect to network resources. This happens independently attempted account.

  (8) used a MacBook on its network without any problem, it is not the connection port or switch

  (9) moved his iMac to another connection on one VLAN different. Same question.

  I'm open to suggestions. I have two days to work on this subject, around the planning of production of the user, while I'm off site for a week.

  10) thinking that maybe it was something that happened with 10.11.2, he improved to 10.11.3 today. No change.

  I don't want to try to clean and recharge its iMac, in the hope that this clears up the issue.

  ANY SUGGESTIONS?

  A few additional tests.

  (1) Symantec deleted using Symantec CleanWipe, without modification. Has been reinstalled after additional tests and a reinstallation of the operating system.

  (2) being ran reports, visualization and research now, but nothing is really coming out as noticeable. Only problem seems to be a helper of Adobe

  (3) use a bootable USB key and had no problem with the thumb drive version, this isn't somehow a hardware problem.

  4) entered the recovery partition and the re-installed El Capitan, in the hope that perhaps, is a pilot or something in the protocol stacks have been corrupt, a reinstall would correct. Reinstall has not corrected the problem.

  I'm really strongly leaning towards here is something in a plist or somewhere configuration file that is corrupted, but I don't know where this would be right now.  Will continue research and testing. Last resort will be a wipe up to bare metal and a clean install. I will not migrate the profile of the user, but only its working files.

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

  Salvation OR engineers,

  I intend to use my gateway NI9792 in the following way:

  1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

  2. the other port to communicate with a cRIO device? If so, how can I do it?

  It seems to be a stupid question, but I really couldn't work this!

  Thanks in advance,

  Luiz

  Good afternoon, Luiz

  Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

  How to set my time on the NI WSN-9791 or NI 9792 gateway server?

  http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

  Configuration and NI WSN product guide
  http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

  Configure the Ports of double Ethernet on real-time controllers

  http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

  video installation and installation CRIO

  http://www.NI.com/SWF/demos/us/cRIO/outofbox/

  Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

  http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

  Sincerely,

  Mauro Vera.