Test movement cards

Similar Questions

• Question Windows Spider solitaire game flashes and I can't move cards unless I have click or drag a lot of times.

  Original title: Spider Solitaire not good

  Spider Solitaire is flickering, and I can't move cards unless I have click or drag a lot of times.  The simple answers please because I am not technical minded.

  Hello

  ·        This only happens with solitaire and spider or other games as well?

  ·        You did changes to the computer before the show?

  Method 1: I suggest you to put the computer to boot and see if the problem still occurs.

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Update the video card driver and check if this solves the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• Timer for "test movie".

  Hello.  I did a search for this problem but I have a lot of visitors on how to use the flash to a stopwatch.  This is not what I want.

  I want to know if there is a way to put a clock on the screen "test movie" after having supported on "ctrl + enter".  Usually, for a scene the timeline will tell how many seconds it is, but with several scenes, it would be nice to have a clock there on the screen, rather than scrolling through each scene by adding the time.  Is there anything available like this, perhaps via an actionscript?

  Thank you.

  If you want to display in a textfield, you use this code.

  but for your organization, you can use:

  trace ((this.totalFrames-this.currentFrame) / stage.frameRate + "seconds remaining");

• Still need to Flash CS6 sometimes but test movie in Flash shows blank results

  I have CC, I am using the latest version of Flash, but sometimes I need to use CS6 and files in 10.3 and more in this edition.

  Here's my problem: when I go to CONTROL > TEST MOVIE > TEST (with in Flash Professional checked) or command + enter. I get a blank swf file. This will be the case for all files, new or old, that is published AS3 / 10.3 and more.  If I put the target to Flash Player 9, it shows correctly.

  Any ideas? This started when I started using Flash CC 2015.

  I fixed it once by trashing my ~/Library/Application \Support/ Configuration files... but that wasn't the only time.

  I tried to restart and do it as well. no luck.

  Thank you

  Try to do a command-shift-enter instead. Who will use the debug player. There could be security or other issues that are causing something to fail silently. Also, try publishing with swf and html and see if it works in a browser.

• Test movie, with webservice

  Hello

  Im making a game that shows figures based on a Web service call, it calls the service every 10 seconds, and the numbers will change after a while.

  I can see the numbers change when I select: test movie in the browser.   It works very well.

  But the numbers never change when is: test movie in Flash Professional

  When I test movie in Flash Professional, he calls the Web service, but the answer is always the same, but when to test the service in a browser, the answer/numbers have changed.

  Please help, I tried to change settings in publishing, the best I got was on Debug, it gets the first call a fresh response from service, but the following travel call, the answer does not change.

  Im just starting with SADF CC and AS3. I did other games with AS2 and has never seen this problem.

  I can share the .fla and .as if nedded

  Thank you

  Paul

  Try adding a number randomly generated at the end of the call as another variable to url and see if that helps...

  var request: URLRequest = new URLRequest (this.gWebServiceURL + "/ theThingServerSide/theThing.theThingMethods.svc/ajaxendpoint/getResult?agentID=" + this.gAgentId + "& randNum =" + Math.random ());

• Nested animation does not move on 'Play', but done on "test movie".

  I use Adobe Flash Pro CS6 12.0.0.481 Mac OS x 10.6.8 freshly installed in the last day - so I have not been juggling with preferences again.

  I use symbols nested for the animation of a bouncing ball. The deeper cymbal is the ball object itself ("ball"). The next symbol out is "bounceball" and it contains up-down animation. Finally, the scene itself contains the animation on the left right.

  If I change the scene, and I press Enter (or control > play) I just saw my ball moving in a straight line from left to right - I do not see the nested up-down movement. Case, however, I "Test movie" then I see the full animation up-down and right-left.

  I'm guessing there is a parameter or a property, do I need to change somewhere.

  Here is the file if anyone wants to look at themselves: http://DL.dropbox.com/u/7608731/ball2.fla

  Use the approach to test the animation.  Play/washing of the timeline will not play sub-un calendar as your nested and down from movieclip.  The option 'play' is more adapted to the timeline-based animations that live on a single scenario.

  If your nested animation is a graphic symbol instead of a movieclip, then you can get it to animate if you give it enough frames on the main spend management scenario.

• Issue of game scenes in test movie animations stop playing

  I'm pretty new to adobe flash, so I hope I'm using the right terms then this question.  I use AS2 in CS5.5.
  I create a project for a class that I was introduced to adobe flash.  The problem is that I got up to a certain point on 15 stages.
  During the 15th stage say scroll the timeline animations works very well, play on the test scene works very well.  When I go there to play on test movie, it stops at a certain point.
  At first, I thought it might be a misplaced stop action, but there is nothing to find.  The weird part is all the other scenes I create once
  continues to freeze as well, the images are there, but the animations will not play.  All my previous animations play ahead of the issue, it's just
  These new plays for some reason any test the animation, but completely smoothly in the scene test and the chronology.  Can someone help me understand this please?

  There is a limit of about 16 000 images in a swf file.  are you that exceed this limit?

• Test movie in Flash professional

  Hello, I did not a lot with flash professional CS5. I create a demo of application 4 framework that stops on the first image and allows the user to navigate to other frameworks using the buttons. I did something very similar before and did not have this problem.  Now with this new project, I created the pages in photoshop and imported on the stage. The dimensions are 1024/768 px.   When I go to control-> test movie-> in Flash professional.  The window appears very low, but the page seems nomal size if I get the top left of the drawing or model. So when I develop the window, rather than see the rest of the design desing to the bottom right floats, because I get the window open to leaving all that white space around the top and left margins.  I've never had this problem before. Does anyone know how to get around this problem?

  

  Have you set the stage size to match the images? From your description, it seems that you have the phase, by default.

• Flash CS5 to crash when testing movies

  When I test movie in Flash CS5, it blocks generally. Output panel scrollbars sparkle and sometimes show the following result:

  364 AVMINF: CALCULATION flashx.textLayout.property::UintProperty/setHelper () @ 0x24E49562
  364 AVMINF: CALCULATION () String/_substr @ 0 x 30325650
  364 AVMINF: CALCULATING String/get length () @ 0 x 30325650
  AVMINF 364: String CALCULATION / http://Adobe.com/AS3/2006/builtin:substr () @ 0 x 30325650
  AVMINF 364: String CALCULATION / http://Adobe.com/AS3/2006/builtin:toLowerCase () @ 0 x 30325650
  364 AVMINF: CALCULATION () String/_substr @ 0 x 30325650
  364 AVMINF: CALCULATION global/parseInt () @ 0x303256A0
  364 AVMINF: CALCULATION global/isNaN () @ 0 x 30325650
  364 AVMINF: CALCULATING color () @ 0x24E4A0DD flashx.textLayout.formats::TextLayoutFormatValueHolder/set
  364 AVMINF: CALCULATION http://ns.adobe.com/textLayout/internal/2008:colorProperty () @ 0x24E4A027 flashx.textLayout.formats::TextLayoutFormat$/get
  364 AVMINF: CALCULATING color () @ 0x24E49F48 flashx.textLayout.formats::TextLayoutFormatValueHolder/get
  364 AVMINF: CALCULATION flashx.textLayout.formats::TextLayoutFormatValueHolder/getCoreStyle () @ 0x24E4AA0B

  Etc.

  Then it crashes. There is no update. I tried a variety of different films with different content and it crashes. I've tried resetting preferences, but not agree. Any ideas?

  Hello

  You draw this information, or are they drawn on their own?

  Looks like you found the info from Profiler for your files.  You have a mm.cfg file on your system?  If you use FlexBuilder/FlashBuilder of profiling, it can leave behind a mm.cfg file that will do everything the SWF content to information in Profiler output during playback in the browser or the Flash IDE.

  Please see if you have a mm.cfg file to:

  • Windows XP:C:\Documents and Settings\<username>\mm.cfg
  • Windows Vista/7 - C:\Users\<username>\mm.cfg
  • OS x - Macintosh HD/Library/Application Support/Macromedia/mm.cfg

  If you find such a file, delete it or move it to another location.

  HTH,

  Amel

• 2 of the 4 buttons stop working when test movie

  I have a main menu 4 buttons. They work as expected when enable simple buttons are activated. However, when I press on test movie, 1 and 4 buttons do not work. The mouse does not change States above them, it's as if they aren't there. I've decided to re-create buttons in a separate file, and then try again. All buttons worked as expected when test movie is called. Large. Should I wear then the four buttons in my project and the same thing happens as before. I don't think this is the code, but here's the code that I use for the buttons, in any case:
  *******************
  Stop();
  
  function onHomeClick(evt:MouseEvent):void {}
  gotoAndStop ("home");
  }
  home_btn.addEventListener (MouseEvent.CLICK, onHomeClick);
  
  function onAboutClick(evt:MouseEvent):void {}
  gotoAndPlay ("about");
  }
  about_btn.addEventListener (MouseEvent.CLICK, onAboutClick);
  
  function onWorkClick(evt:MouseEvent):void {}
  gotoAndPlay ("work");
  }
  work_btn.addEventListener (MouseEvent.CLICK, onWorkClick);
  
  function onContactClick(evt:MouseEvent):void {}
  gotoAndPlay ("contact");
  }
  contact_btn.addEventListener (MouseEvent.CLICK, onContactClick);
  ************************************
  
  Any help or thoughts productive would be appreciated.
  
  

  OK, I found the problem. The menu was laid out in a circular table above a large sphere. The field was in a clip. The sphere has been on the layer above the buttons. Enable authorized simple buttons the buttons hidden by the square perimeter of the clip containing the sphere to be clickable. However test movie saw the clip by concealing the buttons and their States of success, even if it was transparent. Of course the 2 Middle buttons were poking out behind the top of the clip.

  Solution, move the layer above layer movie clip buttons and hide more and click on States if the sphere appeared on top.

• Flash php sql works only in test movie

  I used loadVars and it works very well in test movie in flash.
  on the internet he doenst do anything
  
  When I use loadVariables and have him wait 10 seconds b4, it uses the variables it loads sql information to activate the button that brings up, but dynamic text fields (which come from the same database) are now indefinite. Why used either of thise work!
  
  www.4tenonline.com/JustWork.swf
  
  the button blinks it is because his game to invisible when it loads and then php and sql to determine whether it is visible or not.
  
  This flash the justwork.swf file using loadVariables

  This is your problem:

  SWF:

  URL http://www.4tenonline.com/justwork.swf
  Complete state
  Response Code 200 OK
  Protocol HTTP/1.1
  GET method
  Type of application/x-shockwave-flash content
  Client address /127.0.0.1
  Remote address www.4tenonline.com/65.254.250.106
  Calendar
  Request start time 20/07/07 17:35:52
  Start of response time: 20/07/07 17:35:52
  End time of answer 20/07/07 17:35:52
  Lasting 250 ms
  Duration of response 93 ms
  Latency 157 ms
  Speed 44.82 KB/s
  Response of 116.29 KB/s speed
  Size
  Request Header size 398 bytes
  Response header size 284 bytes
  Size of the request-
  Size response 10.54 KB (10791 bytes)
  Total size 11.20 KB (11473 bytes)
  Compression of the request-
  Response Compression-

  crossdomain. XML

  URL http://www.4tenproductions.com/crossdomain.xml
  Complete state
  Response Code 200 OK
  Protocol HTTP/1.1
  GET method
  Content-Type text/xml
  Client address /127.0.0.1
  Remote address www.4tenproductions.com/65.254.250.106
  Calendar
  Request start time 20/07/07 17:35:52
  Start of response time: 20/07/07 17:35:52
  End time of answer 20/07/07 17:35:52
  Time 203 ms
  Response time 15 ms
  Latency 188 ms
  4.17 KB/s speed
  30.01 KB/s speed response
  Size
  Request Header size 406 bytes
  Response header size 233 bytes
  Size of the request-
  Response size 228 bytes
  Total number of bytes size 867
  Compression of the request-
  Response Compression-

  Content:
  " http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd" >
  
  http://www.4tenproductions.com"/ >
  

  ---

  These are two different servers:
  www.4tenproductions.com (crossdomain only allows data SWFs living here)
  www.4tenonline.com (SWF lives here)

  But back to my original recommendation: update your crossdomain.xml file :)

  Patrick

  Optikalefx wrote:
  > I used loadVars and it works very well in test movie in flash.
  > on the internet he doenst do anything
  >
  > when I use loadVariables and have him wait 10 seconds b4 he uses variables
  > it loads sql information to activate the button that appears, but the
  > dynamic text fields (which come from the same database) are undefined.
  > Why used either of thise work!
  >
  > www.4tenonline.com/justwork.swf
  >
  > the button blinks it is because his game to invisible at the time of loading,
  > then php and sql to determine whether it is visible or not.
  >
  > this flash the justwork.swf file using loadVariables
  >

  --
  http://www.baynewmedia.com
  Fast, easy, better... ActionScript development taken to new heights.
  Download the BNMAPI today. You'll wonder how you ever did without it!
  Available for ActionScript 2.0/3.0.

• Flash CC "test movie".

  Hello people,

  I had a problem and I do not have ' t know how to fix it.

  Whenever I have test my movie "CTRL-ENTER" the window opens very, very small. It is quite annoying because I have to manually stretch the window every time. Pls take a look at the screenie.

  I tried to reinstall flash cc, tried resetting the configuration. I guess cc flash nor save the last position and size of the specific windows.

  

  Thanks in advance...

  OK, I have a fix for the problem:

  Problem is HYDRAVISION that is installed by the catalyst thing.

  I uninstalled everything, including the drivers, etc. and reinstalled the driver for graphics card with the parameters defined by the user and not wanted to install Hydravision and 3 small thinggies useless... and it works...

  concerning

• Flash CS6 - test movie based on Flash Professional grayed out

  I'm quite new to Flash so maybe miss me something here, but I dragged the forums and the internet to find a solution, but can't. I work on just a simple animation and whenever I say to test the movie only the functions that it will provide are the two 'in Air Debug Launcher"(Mobile/Desktop) and functions"on USB device", Flash Professional, and the browser are grayed out and I need the Flash Professional to see. I use the free trial version at the moment if this has nothing to do with it, but I doubt it. Be grateful for a response.

  He probably has a direct relationship with the type of document that you created.  If you create Actionscript 3 files, then you will get the option to test in Flash Professional

• Flash Pro CS5 shows does not text when I test movie/export... only on the stage.

  Exactly what the subject says. I am a novice and regardless of how I export the thing (such as a picture or a movie and in any format), I can't see the text. It's particularly frustrating, because the text is the entire basis of my animation.

  Tried to convert text to clips, no difference. The weird part is, I could test the thing early on with no problem - text displayed and any. I should add: I have used SEVERAL fonts... and I think it was when things started does not.

  An answer to this would be greatly appreciated. I'm working on a deadline and if you know how to solve this problem, it would make a big difference in my life.

  EDIT: They are not unusual fonts - Helvetica, Times New Roman, etc.

  Embed your fonts.

• ScrollBar to test movie

  I am creating a website in flash and I have a step which is quite large (720 x 100 px).  So, when I test the movie in flash content seems to be small so that it fits on the screen.  When I try to zoom, no scroll bar does appear, however, to allow me to see all the content.  Is it possible to zoom into the content of the flash movie and have the bar scroll that appears once this is done? Or I have to create it manually? Thank you

  If it appears in the head of your html page tags:

  change to:

  Otherwise, copy the code between the head tags in your html code