Timer for "test movie".

Similar Questions

• Still need to Flash CS6 sometimes but test movie in Flash shows blank results

  I have CC, I am using the latest version of Flash, but sometimes I need to use CS6 and files in 10.3 and more in this edition.

  Here's my problem: when I go to CONTROL > TEST MOVIE > TEST (with in Flash Professional checked) or command + enter. I get a blank swf file. This will be the case for all files, new or old, that is published AS3 / 10.3 and more.  If I put the target to Flash Player 9, it shows correctly.

  Any ideas? This started when I started using Flash CC 2015.

  I fixed it once by trashing my ~/Library/Application \Support/ Configuration files... but that wasn't the only time.

  I tried to restart and do it as well. no luck.

  Thank you

  Try to do a command-shift-enter instead. Who will use the debug player. There could be security or other issues that are causing something to fail silently. Also, try publishing with swf and html and see if it works in a browser.

• Flash php sql works only in test movie

  I used loadVars and it works very well in test movie in flash.
  on the internet he doenst do anything
  
  When I use loadVariables and have him wait 10 seconds b4, it uses the variables it loads sql information to activate the button that brings up, but dynamic text fields (which come from the same database) are now indefinite. Why used either of thise work!
  
  www.4tenonline.com/JustWork.swf
  
  the button blinks it is because his game to invisible when it loads and then php and sql to determine whether it is visible or not.
  
  This flash the justwork.swf file using loadVariables

  This is your problem:

  SWF:

  URL http://www.4tenonline.com/justwork.swf
  Complete state
  Response Code 200 OK
  Protocol HTTP/1.1
  GET method
  Type of application/x-shockwave-flash content
  Client address /127.0.0.1
  Remote address www.4tenonline.com/65.254.250.106
  Calendar
  Request start time 20/07/07 17:35:52
  Start of response time: 20/07/07 17:35:52
  End time of answer 20/07/07 17:35:52
  Lasting 250 ms
  Duration of response 93 ms
  Latency 157 ms
  Speed 44.82 KB/s
  Response of 116.29 KB/s speed
  Size
  Request Header size 398 bytes
  Response header size 284 bytes
  Size of the request-
  Size response 10.54 KB (10791 bytes)
  Total size 11.20 KB (11473 bytes)
  Compression of the request-
  Response Compression-

  crossdomain. XML

  URL http://www.4tenproductions.com/crossdomain.xml
  Complete state
  Response Code 200 OK
  Protocol HTTP/1.1
  GET method
  Content-Type text/xml
  Client address /127.0.0.1
  Remote address www.4tenproductions.com/65.254.250.106
  Calendar
  Request start time 20/07/07 17:35:52
  Start of response time: 20/07/07 17:35:52
  End time of answer 20/07/07 17:35:52
  Time 203 ms
  Response time 15 ms
  Latency 188 ms
  4.17 KB/s speed
  30.01 KB/s speed response
  Size
  Request Header size 406 bytes
  Response header size 233 bytes
  Size of the request-
  Response size 228 bytes
  Total number of bytes size 867
  Compression of the request-
  Response Compression-

  Content:
  " http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd" >
  
  http://www.4tenproductions.com"/ >
  

  ---

  These are two different servers:
  www.4tenproductions.com (crossdomain only allows data SWFs living here)
  www.4tenonline.com (SWF lives here)

  But back to my original recommendation: update your crossdomain.xml file :)

  Patrick

  Optikalefx wrote:
  > I used loadVars and it works very well in test movie in flash.
  > on the internet he doenst do anything
  >
  > when I use loadVariables and have him wait 10 seconds b4 he uses variables
  > it loads sql information to activate the button that appears, but the
  > dynamic text fields (which come from the same database) are undefined.
  > Why used either of thise work!
  >
  > www.4tenonline.com/justwork.swf
  >
  > the button blinks it is because his game to invisible at the time of loading,
  > then php and sql to determine whether it is visible or not.
  >
  > this flash the justwork.swf file using loadVariables
  >

  --
  http://www.baynewmedia.com
  Fast, easy, better... ActionScript development taken to new heights.
  Download the BNMAPI today. You'll wonder how you ever did without it!
  Available for ActionScript 2.0/3.0.

• Why me charged 3 times for Garageband?

  I recently bought garageband (the app, no in-app purchases) using my debit card and I was charged 3 times for her. I don't know about the payment of test they do on your account. Why what happened? Is there a way to see the transactions that I did? I also know the download history, but I'm looking for something like a recipe section.

  You will need to connect to your account information in the iTunes app to view the history of purchases to iTunes and the Mac App Store, broken down by individual invoices.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.3; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 Air & iPhone 6 + iOS 9.3

• How to set the start time of QuickTime movie in AppleScript?

  I've been tasked with finding a way to play videos to QuickTime in full screen at a specific time.

  It seems that I have to use AppleScript, which I've never used it before.  I wrote this, that does everything, but from the beginning of time says:

  Tell application "QuickTime Player"

  Open the file "Macintosh Users:...: video56.mp4.

  present the document before

  play

  tell the end

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  Thanks in advance for any help!

  El Capitan 10.11.3 OSX

  21.5 "iMac late 2009

  QT worm 10.4 (855)

  Hello

  The script must set the current time property of the document, like this

  ------------

  Tell application "QuickTime Player"

  set tDoc to open the file "Macintosh Users:...: video56.mp4.

  tDoc said

  at the time current 36 - the start time of the movie (in seconds).

  present

  play

  tell the end

  tell the end

  -----------

  Shortman43 wrote:

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  The v designates a file object.

  And the n is a document object.

  Examples:

  read the document 1

  document before playing

  read the document 2

  play tDoc - the tDoc variable contains a document object

  or with a block of tell

  tDoc said

  play

  tell the end

  tell document before

  play

  tell the end

• Position Vs time for LVDT

  Hello, I am very new to Labview (three weeks) can someone give me a few examples on how to measure for LVDT position vs time? It is very simple using an Oscilloscope of cursors of X 1 and X 2 of position to measure delta time, but I don't know how to do this with LabVIEW or charts graphs. I want time to measure the trigger at the fist sign of movement, total race time and dredging (to cylinder). I have attached a picture of what I want to measure. Are there specific screws to search for these times. Even by manually placing cursors on the desired position in labview, all I get is the time for each cursor but not the time delta between cursors.

  Any help will be greatly appreciated

  Juan

  
  

• Cannot burn DVDs or publish on computer for 'home movie' Director / window Vista

  Hello

  I try to publish to the computer for home movie maker Vista zipper theater. publish 52% then pop error I also try many time to burn movie to DVD only 39% is stop and pop up error. Please help thank you very much

  Hello

  ·         What is the full error message?

  I suggest you follow the steps mentioned in the article below.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Also refer to:

  Solve problems with publishing a movie to a recordable CD

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-a-recordable-CD

  Also try to change the audio filters off and check see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/vid, eo-filters-in-Windows-Movie-Maker-frequently-asked-questions

  Thanks and regards.

• SQL to set overall time for all work

  6.2.1.x

  We had a maintenance COMPUTER each night window that starts at 22:30 for many years.  Looks like that will change to start at 23:00 every night instead. We have hundreds of "hard coded" ad-hoc jobs at 22:30 (not inherit) that needs to be changed to 23:00 start.  The jobs are not inherit time due to a current bug who inherited the time is not picked up when insertion in annex jobs who do not have a calendar.

  I need a SQL script that can change the world for the start time for me, so I can't spend an entire day by clicking on the graphical interface.

  Appreciate any help.

  Thank you!

  Hey Tyler,

  Just a little warning: as with the SQL query that modifies the data base of the Admiral in a form, code must be tested and validated by Cisco Support before applying the changes in your own environment. Otherwise, if you run any piece of code that will break the database of the Admiral, this will void the contract between your company and Cisco etc. Note that this piece of SQL code is intended to guide you in the right direction, so that you can view and change your environmental needs, and ALWAYS back up your database of Admiral.

  Jd UPDATE

  -Tide uses a default funny SQL server date depending on version, it's okay to take effect the

  ' SET jd.jobdtl_fromtm = ' MM/DD/YYYY 11:00:00 PM.
  OF jobdtl LIKE jd
  INNER JOIN jobmst AS jm
  ON jd.jobdtl_id = jm.jobdtl_id

  -to determine whether employment is ad-hoc when no calendar is from jobmst
  WHERE jm.evntmst_id IS NULL AND
  JM.jobmst_active = 'Y' AND
  JM.jobmst_dirty <> 'X '.

  - AND jm.jobmst_id = XX, where XX is only linked to a single task for test purposes

  ARO

  The Derrick

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Different response time for each virtual server in the cluster, weblogic 11g

  
  Hello everyone
  
  currently I set up a server with the following characteristics.
  
  O.S. AIX 7
  RAM 32 G
  WebLogic 11 g
  Cluster 4 Server (4 GB each).
  
  My Web the application is deployed on the 4 using servers the management console on another physical server.
  
  J’ai responsible for tests on each server get different time as follows:
  
  Server 1: HostApp: 7090 -> 13 8 seconds
  Server 2: HostApp: 7090 -13 > 5 seconds
  Server 3: HostApp: 7090 -10 > 4 seconds
  Server 4: HostApp: 7090 -> 8 seconds
  
  distribution the load is material.
  
  Why This behavior?
  
  expected be around the same value or not?

  
  

  Thank you

  Please see my comments below:

  1. what made the request? It goes to the database? He calls a web service? Provide details

  2. how to access the application, you have a web server or a load balancer? Provide details.

  2 - is a web application? Is possible to test the application from a browser in the same area where the weblogic?

  I would try that because in this way we can isolate the problem to understand if this is a network problem or a matter of WebLogic Server.

  Best regards

  Luz

• Setting date and time for several photos

  Thank you for providing the space for new users and thank you in advance for your help.

  Currently, I'm moving across lightroom and apple aperture/iphoto 5.

  The part of OCD I like to have my library organized, and I noticed that when I transferred my library everywhere he is in a bit of a mess, so I'm currently putting together the library and it cleaning (around 18000 photos)

  Anyway, I almost settled on a folder structure (YYYY/MM - I for the number of photos I have try on the nut until days could be for many - happy to receive Advisor on it also)

  For the most part, the photos have the date and time of the beginning of the digital age (for me from 2006)

  Photos prior to 2006 are in the negative, and I am currently underway with these scanned and imported into the library, I have a lot each month.  Set the date and time from the date of creation, this is where I am running into trouble.

  I looked around the web and various forums without success.

  First of all, I organize the pictures in the correct order.  Then I select the first photo and then select it the remaining photos.  I then select the date/time setting in the menu and select the first option, ajuster to adjust to the new date and time, say on 01/01/1990 to 1200 hours.

  The result I get is the first photo (the photo so good term) 01/01/1990 @ 1200 as the date and time, others have 01/01/1990 Date (if I'm lucky), and the time of jumping around.  Sometimes it wont even change the date time for the remaining photos.

  What I want to achieve is the time even for all the photos when I select a lot, or increment in time by a lump (is to say 1 minute (1200/1201/1202) or 1 second (1200:00 / 1200:01 / 1200:02)) and I seem not to be able to work it to do this automatically, currently, I have to do this by adjusting each photo (some 200 at a time) which is really manual labor)) intensive

  Thanks in advance and hoping an easy solution

  Concerning

  
  Dean

  I have had success using EXIF change of Basepath.com, but is not

  free. There are other publishers had EXIF free that may be useful to

  you. Some are better than others, and all have a learning curve. I suggest

  make a copy of some files you want to change and make a test of some of

  the available candidates. Search for "EXIF editors" and you can see what is

  available.

• Time for examination VCP after taking the training course?

  Hello.

  Can someone answer me if they know if there is a limit of time for me to get VCP certified?

  I took the "VMware Infrastructure 3: install and configure" course at the end of 2007, it was obviously in ESX 3.0 and VC 2.0.  Due to several factors, I never sat the examination.  So basically I've missed the boat, and second, if I'm still good to go I can take the 3.5 review?

  Answers greatly appreciated.

  Thank you.

  You can take the exam... until VCP310 exam is removed.

  It is not yet an official date:

  VCP VI3 Test expires?

  VCP exam 3 - when he retired?

  André

• Estimate of time for CTAS

  Hello
  I'm looking for a long time to find a way to estimate the time of execution of the orders of the ETG. I'm a DBA. Our users are running DEC orders to charge millions of rows. Commands extract the data from 4-5 very large tables each with millions of records and process them using where clause and group by clause and finally to create the table. All these things are coded in the order of the ETG. These CTAS sometimes takes a lot of time as 5, 8 Hrs. users frequently ask me to find how long it will take. I use the OEM and the TOAD. But I couldn't find the estimated time for these tools. I think there must be a way, but I do not know the method.
  Can any body please help me in this regard?
  
  Thanks and greetings
  Ananda Basak

  915354 wrote:
  I started using the method of table surface and looking at the value of column time to estimate the execution time long-running queries. For the first test case, it gave me good estimate. But for the 2nd case today, the plan for a DEC showed the value of the column time as around 40 minutes wherever the ETG was already running for 1 hour 45 minutes. If the value of column time is not estimate this matter correctly.
  Please suggest why this might be happening?

  That's why I said at the beginning

  "Of course, the optimizer estimates are only estimates and are not as accurate as the database statistics that are in place." If the optimizer generates a bad plan, it is likely because the optimizer expects an operation to take much more or much less time that it in fact in this case the runtime optimizer estimate is likely to be far. »

  Even in the best of cases, the optimizer estimates will be rough. If statistics are imprecise, estimates of the cardinality and runtime optimizer may potentially be off by a bit. You will have to dig into the specific query plan to see where the optimizer estimates do not go and then to understand the statistics are misleading it. Most likely, you will find statistics on a column, other tables, or some indexes are updated but you might also find a column that has need of a histogram, statistics system that is obsolete or a myriad of other possible sources of error.

  Justin

• Nested animation does not move on 'Play', but done on "test movie".

  I use Adobe Flash Pro CS6 12.0.0.481 Mac OS x 10.6.8 freshly installed in the last day - so I have not been juggling with preferences again.

  I use symbols nested for the animation of a bouncing ball. The deeper cymbal is the ball object itself ("ball"). The next symbol out is "bounceball" and it contains up-down animation. Finally, the scene itself contains the animation on the left right.

  If I change the scene, and I press Enter (or control > play) I just saw my ball moving in a straight line from left to right - I do not see the nested up-down movement. Case, however, I "Test movie" then I see the full animation up-down and right-left.

  I'm guessing there is a parameter or a property, do I need to change somewhere.

  Here is the file if anyone wants to look at themselves: http://DL.dropbox.com/u/7608731/ball2.fla

  Use the approach to test the animation.  Play/washing of the timeline will not play sub-un calendar as your nested and down from movieclip.  The option 'play' is more adapted to the timeline-based animations that live on a single scenario.

  If your nested animation is a graphic symbol instead of a movieclip, then you can get it to animate if you give it enough frames on the main spend management scenario.

• Time for specific dept record display by adding 10 minutes

  Hello
  

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  /****************************************************************************/
  
  create table dept(
  dept_id number(14) primary key,
  c_id number(14) constraint dept_fk references centers(c_id) NOT NULL,
  deptName varchar2(50)
  );
  
  create sequence dept_seq
  start with 1 increment by 1;
  
  create or replace trigger dept_trig
  before insert on dept
  referencing new as new
  for each row
  begin
  select dept_seq.nextval into :new.dept_id from dual;
  end;
  /
  
  create table shiftManager(
  s_id number(9) primary key,
  dept_id number(14) constraint shiftManager_fk references dept(dept_id) NOT NULL,
  title varchar2(110), /**e.g. Morning, After noon, Evening **/
  startTime date,
  endTime date
  );
  
  create sequence shiftManager_seq
  start with 1 increment by 1;
  
  create or replace trigger shiftManager_trig
  before insert on shiftManager
  referencing new as new
  for each row
  begin
  select shiftManager_seq.nextval into :new.s_id from dual;
  end;
  /
  
  select to_char(startTime,'HH24:MI'),to_char(endTime,'HH24:MI')
  from shiftManager where dept_id=1 order by startTime asc;

  I want to choose startTime adding 10 minutes to the end for dept_id specific for example time
  
  Dept1
  =====
  startTime = 09:00 and 14:00 = endTime
  
  POWER required:
  ================
  09:10
  09:20
  09:30
  09:40
  09:50
  10:00
  ..
  ..
  ..
  ..
  ..
  13:40
  13:50
  14:00
  
  Thank you in anticipation
  
  Best regards

  Raakh wrote:

  I am not able to understand especially startTime + (level - 1) / 24 / 6<= endtime="" +="" (600="" -="" 1)="" 600="">

  Oracle date arithmetic unit is day. So 1 / 24 represents 1 hour and 24 1/6 represents 10 minutes. You start by startTime and continue to add 10 min and startTime + (level - 1) / 24 / 6 impeccable (level starts from 1). Now we must stop when meet us or exceed the end time for the first time. Therefore, we can add add 9 min 59 s to endDate and use it as the end. And (600 - 1) 3600 / 24 represents 9 min 59 sec.

  In fact, we can simplify and use the following logic: difference between current 10 min. and end must be< 10="">

  connect by startTime + (level - 1) / 24 / 6 - endTime< 1="" 4="">

  SQL> select * from shiftManager
    2  /
  
     DEPT_ID STARTTIME ENDTIME
  ---------- --------- ---------
           1 01-JUL-11 01-JUL-11
           2 01-JUL-11 01-JUL-11
  
  SQL> select  to_char(column_value,'HH24:MI') tm
    2    from  shiftManager,
    3          table(
    4                cast(
    5                     multiset(
    6                              select  least(startTime + (level - 1) / 24 / 6,endTime)
    7                                from  dual
    8                                connect by startTime + (level - 1) / 24 / 6 - endTime < 1 /24 /6
    9                             )
   10                     as sys.OdciDateList
   11                    )
   12               )
   13    where dept_id=1
   14    order by column_value
   15  /
  
  TM
  -----
  09:30
  09:40
  09:50
  10:00
  10:10
  10:20
  10:30
  10:40
  10:50
  11:00
  11:10
  
  TM
  -----
  11:20
  11:30
  11:40
  11:50
  12:00
  12:10
  12:20
  12:30
  12:40
  12:45
  
  21 rows selected.
  
  SQL> 
  

  SY.