y570 hdmi output issue

Similar Questions

• GT620 in XPS8500 - no DVI or HDMI output issue

  Hello

  On my XPS8500, I can't the DVI or HDMI output ports correctly although VGA works OK:

  I use a LG 22 '' monitor with my Dell Vostro 200 with a card that had output DVI and it works well, but on the XPS8500 it gives no signal, I have uninstalled and reinstalled the latest Dell driver and removed hardware from the Device Manager, when I do that I find to restart the GT620 outputs the res 1650 x 1050 native until Win7 completely installs the driver and requires a reboot , upon restart, no signal is output. This happens on DVI and HDMI.

  While in this without signal condition VGA does not export until I have remove the HDMI or DVI monitor cable if something is turn off VGA at this time.

  Cranking up connected via a cable DVI or HDMI, there is no the Dell BIOS screen or the start of Win7 is... new VGA screen is fine.

  Is just crappy GT620 or am I missing the point!

  Well, I have an update for everyone with this kind of problem - my monitor is a LG 22LS4R, which is a monitor with TV tuner built in and after some research, it appears that some monitors (especially the monitor with TV tuner) report the correct EDID information (the info that the PC Gets the monitor to the determin the correct resolution is used etc.)

  I tried my XPS8500 / GT620 on my Sony 2008 32 '' LCD TV with HDMI and TV perfectly displayed at 1980x1080P, so I know that my graphics card is ok, it seems that my LG 22 '' monitor is not so happy with my new PC!

  Further reading shows tweaks people came up with to work around the problems of this kind, I tried, but couldn't make it work so I can either replace my new Board GT620 to my old ATI 2600XT (which does not work on my monitor) or to use VGA cable which works ok'ish or get a new monitor (hmm wife my not be too happy with the freshest!)

  So, I think that this problem is toward the low for older monitors with eccentric HDMI and my nVidia GT620 capabilities do not cooperate with it.

• STR DN1040 HDMI HDCP issues

  I have a recurring issue with my new receiver STR-DN1040. It works fine for a while and then it stops negotiating devices on my TV HDCP. For example, my PS3 will display a black screen when I turn it on. My TiVo Series 3 displays a screen saying that there is a negotiating HDCP error trying to watch cable channels. The only solution I found is to unplug the receiver from the wall and plug it in again - then it immediately starts working again.

  It produces at least a couple of times a week, and it's extremely frustrating. Looking at a few discussions on here and other websites this is not an uncommon problem.

  I tried tweaking about all the settings that I can think of nothing doesn't. One who seems to have made the most difference is turning off the fast display of the HDMI, but it might just be a coincidence.

  Here's what I connected through my receiver (all with HDMI):

  Apple TV

  Xbox 360

  Wii U

  PlayStation 3

  TiVo Series 3

  Sony BDP-S360 Blu Ray

  My TV is a Sony KDL-46EX710.

  My HDMI outputs receiver / A + B the TV (I have a set of HDMI input upwards for games and one for the TV-movie).

  As you can tell, I love my Sony AV products. I wish just that this receiver has worked reliably for me.

  Is this a known problem and it's something that will be fixed in a future update? I really want to love this receiver (and most of the time I do - when it works!), but every time I turn on the TV and get a HDCP error, I want to throw it out the window.

  Ideas or ideas here would be appreciated.

  Thank you!

  High-bandwidth Digital Content Protection (HDCP) is a system of protection against copying in order to eliminate the ability to capture digital content from the source to the screen. It is designed to protect digital signals when using a DVI Interface (Digital Video) and High-Definition Multimedia Interface (HDMI).

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• PC HP Compaq 8100 Elite: How can I add to my PC HP Compaq 8100 Elite HDMI output

  I would like to use my PIP (picture in picture) of HD television feature newly acquired as a monitor for my PC HP Compaq 8100 Elite, which has no HDMI output. The PIP function requires a HDMI input.

  Is there a map update I can add to the PC HP Compaq 8100 Elite to provide me with HDMI?

  At any time.

  I am pleased to have been of assistance.

  There should be a driver disc in the box.

• HDMI output have suddenly stopped. Pavilion a6340a

  Hello

  I posted here in hope that someone can give me some advice.

  The system in Question is:

  • HP Pavilion a6340a desktop computer. Double heart
  • Vista 32 bit SP2.
  • NVIDIA GF8400GS
  • COMPRO Video mate Vista TV Capture card.
  • 2 GB of RAM.

  It is a bit of an older system, I guess, but it plays well as a HTPC for a while now. It has a small LCD monitor connected via the standard connection and a large flat screen Toshiba TV connected via HDMI. He did a great job.

  Today, the HDMI output just stopped. The Toshiba TV again to survey/is visible in the Nvidia Control Panel and the Vista Control Panel when it is connected to the HDMI. the implementation of the features of multiple monitors are available. But there is nothing happening on TV.

  Things has tried so far.

  • Two different Cables HDMI - nothing.
  • Connected my Pavilion Notebook DV6 on the same HDMI port on the TV - works fine.
  • Installed the latest driver from Nvidia - nothing.
  • Tried all the three HDMI ports on the TV - nothing.
  • Physically, shot the video card in the computer, he dusted off and reassembled it. -Nothing.

  I don't understand. Could this be a processor problem, or I have to pay for a new video card? Is it possible to test the output from the HDMI port with a multimeter or something? I do not understand why it would stop just like that. I just installed Vista SP2 a few weeks ago, but it was working well after I did.

  Any help with this would be greatly appreciated. The system is out of warranty, of course, but it has been a great HTPC for me. I stuck a blu - ray inside player and I was about to give him another 2 GB of RAM.

  Kind of useless now, without HDMI.

  IM at a loss. What else can I do to verify that Exchange of the graphics card?

  Hello

  The short answer is: replace the video card VNvidia GF8400GS. If you happen to have another video card around laying which has an output and HDMI, then install it for a test. It's the fastest way to solve the problem.

  Best regards

  EICO

• F5 will not read a map and will not HDMI output

  Hey guys, I'm new here and new to F5. I just got me second hand F5 and opportunity SXS pro + card (64 GB) and the camera is not picking up. When I insert the card, turns bright red media access, and then I get locked out settings. I get a cannot continue message when I try to do something. I don't get a message to format the card, and I don't think I can access the menu to format the card manually because I don't have a HDMI output power on my HD Gratical Zacuto. Any idea of what this could be the cause?

  
  

• Re: Satellite U400-145: no option to select HDMI as HDMI output default

  Hello

  I followed the instructions in the manual its leader to the topic on the HDMI output.
  However, when I go to the sound control panel, there is no digital output device (HDMI) listed only the Conexant Chairman and SPDIF outputs.
  I tried the default SPDIF output, which did not work.
  The HDMI works fine for the image, but the absence of the sound through it is driving me crazy.

  I'm running VISTA (fully updated) on a U400-145

  Someone at - it ideas how I can get the HDMI to appear as an output option?

  Andy

  Hello

  Go to the control panel-> Sound-> playback tab
  There, you have to click to the right.
  Then mark the options; Show all disabled devices
  Then you should see the HDMI interface.
  Now, you could activate and chose as the default value.

  Welcome them

• Qosmio G30-161: Cable for HDMI output on DVI input

  I have my G30-161 "HDMI" output as well as the analog out. I began to find a cable to connect it to the DVI to a TFT monitor, but seem to have trouble identifying which is the end "HDMI" cable connection. Does anyone know the formal classification of HDMI connector (or a UK power cable) I can be sure I buy the right cable?

  Thank you very much

  Phil

  Hello Phil

  Put? HDMI-DVI adapter? as keywords on Google and you'll find enough online shops where you can order one.

• Live streaming and own HDMI output on camcorder SONY consumer (HDR-PJ650VE in my case)

  Hi all

  I'm trying to figure out how I can live streams, using my Camcorder HDR-PJ650VE. I managed to connect the camcorder to my TV by HDMI out and get the live stream, but the problem is that it also displays the superimposed onscreen. It would be a very useful feature, since it this way, you are able to capture the stream by a jury of consumers capture and share it on Youtube for example.

  I cannot find anything on the manual release of the stream HDMI output and get rid of overlapping info. Is there a key combination or a hidden menu to achieve?

  In addition, it seems very strange SONY would not offer such feature, as for example the PANASONIC offers this good enough consumption walked on models like HC-V520

  Please, let me know if it would be possilb esolving this annoying limitation

  Best regards

  Matteo

  I want to share my discovery because it seems to be valid for all SONY camcorders: to have a clean HDMI out, turn off on HDMI CTR.

  I'm very happy now and I'll start live broadcast!

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• Satellite P50-B-103 - to connect my HDMI output on a VGA monitor

  Hi all

  I just bought a satellite * P50-B-103 *, which has a HDMI output and I want to connect it to an external VGA monitor.

  I thought that I just need to buy a HDMI - VGA Converter, but the buyer was told that Toshiba, unless this model, is not ready to connect to a VGA monitor, although I use a converter.

  Is it true or I can connect my laptop to the vga monitor using the converter?

  Thanks in advance,

  Charly

  It remains that HDMI provides digital signal and analog support port VGA (RGB) signal.

  To be honest, I read a lot of articles on these adapters and converters, but in many cases, these converters are useless.

  So it s no matter if your laptop was manufactured by Toshiba or another manufacturer.
  ITSA the question of the standard of caught signals supported by each port.

• Satellite L500-131, an HDMI output to the audio amplifier

  Hello

  I can't the sound of my Satellite L500-131 HDMI port to my Pioneer amp supposed to be designed to manage these tings...

  Think the problem is in the early stages as I * don't * select "Realtek HDMI output" as default + output + option is not available.
  Playing around, I managed to get to an old Microsoft driver hidden in memory somewhere and could select HDMI output 'default' through the laptop speakers. But ultimately this ddn can't get sound through either, well that the volume to "sound board" control of Vista indicates activity signal (bars during playback of DVD)... :|

  No idea what is the problem? By selecting "Output HDMI" audio output by default seems to be a Solver for everyone, but it's the only option that is not left in me, so frustrating... :|

  Thank you very much for any help provided.

  Hello

  To be honest I often use HDMI connection on my laptop but I never had any problems with this connection. Everything is working properly and even I checked again all works well!

  Anyway, in your case, I'll try reinstalling the audio driver. You can find it on the Toshiba site.

  If you use the HDMI connection, connect the cable first. Then turn on your TV or your amplifier and finally the laptop.
  Check it!

• Y510p - drivers nvidia HDMI output that's an analog connection

  I had occasional problems with HDMI output before, but can usually get things working in certain combinations to turn off TV and laptop.

  This time, however I can't convince them to talk together. I suspect that this may be due the new drivers (353.30).

  The control panel can see TV and recognizes that it is a LG TV, but TV shows only "no signal".

  I tried

  -the extension and mirroring of the display

  -changing the resolution

  but no luck. The only thing is that enter in the nvidia Control Panel, I noticed that the control panel is refers to the "analog display" and claims that he uses the VGA connector.

  Any ideas how NVIDIA persuage it's really a digital camera display via the HDMI connector?

  Thank you

  Mark

  Now fixed by the expediency of simple to try another HDMI cable :-(