Test the connection... File not found

Similar Questions

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.

• manage the runtime error 1000: server lost connection/file not found

  I have a videoDisplay object that throws an error file not found on the server running, even if it is there. Sometimes it works, sometimes it throws the error and the program cannot recover from the error, so after that the error is thrown, the object is stuck until the refill. I've seen examples of using the NetStream class to load the file before playing and also the class NetConnection.
  
  What is your preferred method for the two video load, assuming that the user will change the video source several times during the session and management research of server errors?

  Yes, you'd know that if you're using FMS.
  If you use a var can be linked to the source of the string, this is the first place I'd watch. You can try a stripped down from the sample application with no link? Just change the source of a button click and see if the server generates the error... I bet it won't

• Try to install the downloaded drivers when comes up with the error "file not found".

  Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found

  C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?

  Hi daddums1958,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

• IMAQdx attributes listed in the xml file not found in labview

  Hello

  Some attributes of my camera our watch camera (DALSA CamExpert) software but are not displayed in MAX.

  When I opened the xml file, I don't see a difference between the attributes shown and hidden.

  Why LabView displays all possible attributes?

  The sml file has specific requirements?

  Any ideas?

  Hello Eric,

  I solved the problem yesterday!

  I use a DALSA camera. Dalsa software downloads the XML file and saves it in a directory 'dalsa"on my local disk.

  National instruments software (MAX) downloaded XML file and saves it in another directory. The 2 files were not equal. I replaced the XML file OR the XML of Dalsa file and now I'm able to get all attributes.

  But thanks for your response!

  Kind regards

  Kim

• When you use the copy and collect the files to the new location, I get the error file not found...

  I have 24 hours to media manage and send a feature-length documentary online instead. Everything is ready to go and so I'm going in the media project manager manage all this and I get the following error message:

  

  This is meaningless - why he's looking for the file that it is the copy in the destination folder? The file in question is not in offline mode, it is bound to correctly in the project file and reads without problems. I also tried manually copying the file in the destination folder to see if it changes anything, but no luck.

  I would like ideas, that anyone could have!

  Thank you!

  -Michael

  It seems that because the name of the file was a '-' in there. I changed the name of the file and then reconnected and it has been working fine since.

• What should I do when after Lightrom 6 worked OK and I was rocking it draws to develop, all of a sudden I have started getting the message "folder or file not found?

  I downloaded photos successfully in Lightroom 6 and were able to develop and even export but suddenly in the process of development or export, Lightroom gives the message "File not found" and "file cannot be found. These pictures are already in Lightroom, how can't he not know where they are? And is it a problem with Lightroom, my computer, or what I did? And what should I do to correct this?

  Photos are never stored in Lightroom. They are stored on your hard drive somewhere, instead you put them, or to the place where you education Lightroom to put them.

  Lightroom is a database. When you import a pohtos, a record is created in the database for each photo, which contains the file name and the location of each photo. When the photo is no longer in the location Lightroom is looking (because somehow the file or folder has been moved, renamed or deleted outside of Lightroom), Lightroom indicates that it does not find the photo (or the photo is missing).

  Therefore, find the photo using your operating system. Once you have found the photo, you must tell Lightroom where the photo is, and what's his name. The exact tools used in this step are described here indetail: Adobe Lightroom - find folders and files moved or missing

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• "File not found" message while trying to download games.

  Original title: downloaded games on this computer

  Whenever I have to download a new game, I get the message "file not found". Games Download fine on my other computer, but I would like to be able to use this computer also because of the convenience of not having moved.

  Hi buzzyh51,
   
  a. what operating system is installed on your computer?
   
  b. are you referring to the Games downloaded from a specific Web site?
   
  c. other computer also has the same operating system?
   
  d. get you any specific error and the error code?
   
  e. is the relevant issue in a particular game?
  f. What is the size of the file when it is downloaded?
   
  In the meantime, follow the steps below.
   
  Method 1:
   
  Temporarily disable any security software and then try to install the game, follow the steps mentioned below

  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

   

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  Turn off the User Account Control (UAC) and then try to install the games.

  Access this link to turn off UAC: http://windows.microsoft.com/en-US/windows7/Turn-User-Account-Control-on-or-off

   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Method 3:
   
  Put your machine in a clean boot State and try to install the game and check what is happening.
   
  Response with status.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Request for URL AS3 file not found

  Hello

  I just learned last night of Ned Murphy how to encode a btn in AS3.

  Problem is when you test the site frameset Dreamweaver, site name: URLRequest on drive C with my browser by default F12, I get a problem loading the page / file not found.

  Here's the AS3 code btn.

  Btn1.addEventListener (MouseEvent.CLICK, btn1Click);

  function btn1Click(evt:MouseEvent):void {}
  var url: String = "C:\WebSites\FrameSets\URLRequest\mainFrame1.html";
  var req:URLRequest = new URLRequest (url);
  navigateToURL (req);
  }

  Just for comparison, here is the code of btn AS3 Ned copy pasted to my son last night.

  Btn1.addEventListener (MouseEvent.CLICK, btn1Click);

  function btn1Click(evt:MouseEvent):void {}

     var url: String = " http://www.Awebsite.com/aWebpage.html ";

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req);

  }

  What keeps my browser to order 'C:\WebSites\FrameSets\URLRequest\mainFrame1.html ';

  What is the var url: String?

  Thanks for reading

  Sabby76

  It could be a typo (paste C:\WebSites\FrameSets\URLRequest\mainFrame1.html into your browser to test), or it could be a security breach (go to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm and set the safety of your flash files).

• How to set a file not found page on my page?

  I want to define an HTML page replace the default 'file not found '?
  How can I?

  I think it's always accurate: http://smallbusiness.chron.com/change-error-handler-firefox-48250.h...

• Why magnets of all return sites suddenly message "file not found".

  I use Firefox 26.0 on Windows 7. Until yesterday, by clicking on an icon of the magnet has triggered a response by utorrent. Today, December 25, 2013, doing the same thing in the same way on any magnet on any site icon gives the message "file not found" instead of doing what he did before. No changes to Firefox. Use of IE, get the desired result, so it seems not to be a problem of utorrent. What do you recommend?

  Hello

  I found this old article, see if that helps you:
  https://support.Mozilla.org/PT-BR/questions/930045

• DtlDrvProtect file: "file not found".

  My PC has been suspended or frozen every two or three days. Whenever I set my PC to sleep, or restart, if I then run the autorun to see what happens, a file named CtlDrvProtect is highlighted in yellow with the message "file not found".

  I then delete this as an administrator but it reappears whenever I start leader, if not again deleted every time, to my PC hanging / freezing.

  Someone has ideas how to stop the computer to search for this file DtlDrvProtect - which is obviously not there in the first place?

  Thank you very much.

  Original title: DtlDrv Protect

  Hello Paul,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  a. you get the error message at the startup of the system?

  b. don't you make changes to the computer before this problem?

  The question may arise as a result of a third-party software conflict or due to some corruption of system related files. We should continue to diagnose faulty software, or corrupted file generates the error message. I, therefore, suggest you try the following methods and check if the problem persists.

  Method 1:

  Boot to the system and check the number.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  If the problem does not occur in the boot, you can determine which applications and services on the computer is causing this issue.

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  Try to run a scan of the file system (CFS) auditor to check any file corruption:

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively click on Yes.
  3. In the command prompt, type the following command and press ENTER: sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• VMware file not found

  After I had Fusion 7 on and then wanted to uninstall XP. In doing so, I think I screwed up my installation of VMware.

  When I try to open the merge I get the message "file not found" I tried to delate and reinstall Fusion 7 but get the same message. Can someone please help?

  Thank you

  Marc

  Is that all there was to the error message?

  Take a look at: uninstalling, reinstalling and upgrading VMware Fusion (1014529)

  Also take a look at: manually uninstall VMware Fusion (1017838)

• Download items 11 - "file not found".

  Hi alltogether... I have a problem: when you try to download photoshop elements 11 (my new laptop is not able to read the disc) I get the notice "file not found". I am trying to download it since yesterday, but as soon as the provider (internet explore and firefox) opens the link - failure appears. Back, anyone know if there is a general problem with the site? Or is - anyone knows of this failure and can give me an adivce?

  Best regards and thanks in advance

  Yvonne

  Hi yvonnep97993967,

  There is a problem with the link where you download, please try to download using the links below:

  For the English, Japanese, French, German:

  • http://trials3.Adobe.com/AdobeProducts/PSE/11/Win32/PhotoshopElements_11_WWEFDJ.7z
  • http://trials3.adobe.com/AdobeProducts/PSE/11/Win32/PhotoshopElements_11_WWEFDJ.exe

  For the Chinese (China), Czech, Dutch, Italian, Polish, Portuguese (Brazil), Russian, Spanish, Spanish (Latin American), Spanish (North American), Swedish, Turkish:

  • http://trials3.Adobe.com/AdobeProducts/PSE/11/Win32/PhotoshopElements_11_LS15.7z
  • http://trials3.adobe.com/AdobeProducts/PSE/11/Win32/PhotoshopElements_11_LS15.exe

  Kind regards

  Rahul