View of the horizon and 'Blast' Protocol

Similar Questions

• View of the horizon 6 - customer zero can't see RDS Deskstop

  Hello!

  We have been in view for several years.  I just deployed a Desktop of RDS.  If I connect to the server from view with the client software from view of the Horizon, I see the desktop as an option, as well as other items of work to which I have the right.  However, when I connect to the server with a Client light Wyse zero (P20s and P25s), I can see other automated and manual office pools, but the RDS Desktop pool is not listed.

  This configuration is not supported?  Is there a parameter required to allow connects to RDS Desktops?

  Thank you very much!

  Update:

  I found this article:https://techsupport.teradici.com/link/portal/15134/15164/Article/2479/Do-PCoIP-zero-clients-support-Microsoft-Remote-Desktop-Services-15134-2479

  After that I updated one of the clients Tera2 zero to 4.7, I was able to connect to the RDS office pool.

  I'm glad to hear that you figured it out.  Can you mark this issue as resolved?

• I downloaded LR6 to a new HP Pavilion computer and when I try to change in developing all I get is a blue screen. Photos are .dng when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the re

  I downloaded LR6 to a new computer HP Pavilion. 10 windows and when I try to change in developing all that I get is a blue screen. Photos are .dng but when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the rear section. When in the module library, photography is able to be seen, but as soon as I click on the development, I see a flash of the photo and then the screen is all blue where I would like to see the photo. I opened both the old and the new computer and against each element and they are identical with the exception of the blue screen. I wonder if it has something to do with the magnifying glass?

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• tests of the device for the time of the ASM and Network Protocol (NTP)

  Hi all.
  I try to install Infratruction grid Oracle 11 g R2 amd oracle Linux OS but
  I got the following error.
  
  tests of the device for the time of the ASM and Network Protocol (NTP)
  can someone guide me what should I do for them?

  in RAC 11 GR 2, the option to synchronize the time between the nodes are ntp or ctss.

  If you want to use ntp add the - x option in/etc/sysconfig/ntpd (for example OPTIONS = "-u ntp:ntp Pei /var/run/ntpd.pid x")

  Hope this helps

• View of the horizon 3.5.0 and ThinApp v4.7 with Cisco ASA Smart Tunnel 9.3.3

  Hello

  The problem:

  Our technology smart tunnel doesn't seem to be forward traffic to our new customer from the view.  I wonder what kind of configuration changes must be considered to enable such a connection.  The error returned when searching for the host name goes in the direction of the hostname not found.  Error finding of intellectual property is related to the time-out.

  Background information and specifications:

  We are in the process of upgrading our servers from 5.2 to 6.2 connection.  As part of the upgrade, we want to improve our customers for the Horizon to use version 3.5.0.  To make it easier on vendors and remote computers we prefer also to our Horizon View Client with ThinApp 4.7.3 ThinApp.  We currently have a Cisco ASA, supporting a SSL VPN portal with "Smart Tunnel" technology.  The ASA is currently on firmware 9.3.3 in production, but we have access to version 9.5 in test.

  Preferred connection scenario:

  User > PC > VMware View Client (ThinApp would be) > Cisco ASA Smart Tunnel > view connection server > Virtual Office

  .exe running on the client to view ThinApp:

  It seems the ThinApp Client version view is only launching VMware - view.exe.

  .exe running from the customer view full/thickness:

  VMware - view.exe

  -ftnlsv.exe

  -vmwsprrdpwks.exe

  -ftscanmgr.exe

  There is something else to consider when the view client configuration ThinApp or thickness to work with Cisco SSL VPN Portal and the Smart Tunnel?  We should have ports configured in the client in connection with the same view Firewall works with SSL VPN Portal port redirector functionality.

  We have not been able to find any documentation on how to properly configure the smart to work with the New Horizon 3.5.2 client Tunnel.  A ticket of troubleshooting with Cisco suggests that the Smart Tunnel feature still perhaps not compatible with this new Horizon (thin or thick) client.  Currently, we are looking at other options because it is not not clear whether Cisco will be able to get us the confirmation or offer a solution without delay of our project to upgrade.  Maybe stick to the previous VMware View Client version 5.4.0 which we know work with Smart Tunnel in some situations and with the redirector port for others.

• View of the horizon 6.2, 3.5 see Client and Windows 10

  Hi all

  I did an in place upgrade of Horizon view 6.2 over the weekend and have been very satisfied the performance and features.  However, I have a bit of a problem with Windows 10 company.  The VDI desktop resize not balance not as expected.  It seems that whatever the Windows 10 Office is set in vSphere, seems to stay when connecting with the customer to view.

  I had this problem for Horizon 6.1.1 with the 3.4 customer, but not a not sweat until this recent publication.

  I wanted to remove my image of Windows 10 company as being the culprit, so I installed a new version of Windows 10 Enterprise 64-bit with the latest tools from VMware View Agent and the problem persists.

  I'm under 6.0.0.b and ESXi 6 vCenter with the latest patches.  I can validate the scale/resize screen problem occurs on multiple endpoints, so I don't think the problem is with the endpoint device and the client.

  Any ideas?

  It's 3D acceleration.  Turned off, power off/on VM and everything works as expected.  (SVGA/NVIDIA) 3D acceleration is not supported in Windows 10?

• With both internal customers and external view of the Horizon, I do * have * to have at least a connection to the server by type of connection?

  If I want both external and non - VPN and LAN users internal to access desktops from view, I need to have a connection to the server dedicated to external users and another for internal? Right now I have one pair of Security Server-connection to the server and external connections work fine, but the internal connections are not. I have to get up at least a connection replication server and change the URL HTTPS Secure Tunnel for internal users only?

  Apparently, you don't need a connection to the server dedicated to internal users if you also external users and a security server. I found this during my troubleshooting. The URL of security server will be configured as administrator mode that external URL can be resolved and accessible while the URL to connect to the server will be configured with a URL can be resolved internally and is accessible in administrator mode.

• Why show black screen for some of my users with a view to the horizon?

  Hello

  I installed horizon view 6.0. now, I just have a problem sometimes some of my users connect to their desktop with vmware view client horizon just see a black screen and cannot do everything even when I'm this office openconsole in vsphere client no show and a black screen for solve the problem I have to restart this desktop computer and its not ok how can I prevent black screen

  now I see that my status of vmware tools was obsolete is so important?

  What di I do?

  Best regards

  Babak

  As often occurs when the wrong VGA driver is installed.  This occurs when the view Agent is installed on the desktop, and then the VMware Tools is updated after the fact.  The result is the driver included with the Agent to view VGA is replaced with the VGA driver in VMware Tools.  You can see some advantages to the relocation of the Agent of the view, or update the VMware Tools and then install the Agent from the view.

• View of the horizon 5.3 Exchange at the level of the Office/Lync bits

  Hello

  I know there are a lot of discussions on the mismatch between levels bits for deployments of VMware View Horizon in combination with Lync 2013

  AFAIK the bits of the customer level Lync must match the number of bits OS.

  Thus, for example:

  On the virtual machine: needs of Windows 7 SP1 64 bit 64 bit (including the lync client) Office 2013

  but for my situation, I want to use the 2013 32-bit office.

  The research on the internet and I found this:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2064266

  If I understand correctly, it seems that you most use the 64-bit office (lync client) when you are VM OS is 64-bit.

  I don't understand?

  I love working at this situation "supported":

  VM:

  Windows 7 SP1 64 bit

  2013 office (including the lync client) 32-bit

  Bit of agent 5.3 64 view horizon

  Client:

  10ZiG computer Thinclient Windows 8 embedded 32-bit

  32 bits of Lync VDI plugin

  Customer view horizon (later, 32-bit)

  Looks like it is supported to 5.3 on?

  You are right.  With view 5.3, the bits client Lync 2013 level didn't match the level of the bits of the VM operating system.

• View of the horizon + Openldap

  Hi all, is it possible to use vmware Horizon with Openldap (No. Active Directory)? What are the limits? Can I use dial with openldap?

  
  Thanks in advance

  JS

  We have been shipping for more than five years and I worked in the poster for over 6 years and we always need AD. He was always a notation of the AD requirements in the docs since its need to work things out.

  In the getting started guide, the first step is preparing your ad. It connects to this section of the Installation Guide in the docs.

  VMware View 5.2 Documentation Library (To prepare your Active Directory)

  It says here view uses Active Directory and some steps need to be done. It also indicates the AD supported versions.

  WP

• View of the horizon 6.0

  Can you upgrade from 5.3 6.0 on the Horizon while users are connected to the Desktops.Thinking I just disabled the commissioning.

  Part of the process restarts the connection broker service.   See the upgrade guide, https://pubs.vmware.com/horizon-view-60/topic/com.vmware.ICbase/PDF/horizon-view-60-upgrades.pdf

• View of the horizon 5.3 - How is multiple monitors?

  I work with a client who has an obligation to provide 8 monitors for some of their users. For these users, they will use SBC with a one-to-one mapping, amulet DXM620 blade positions to be precise. However I was advised by amulet that View cannot negotiate desktops with more than 4 monitors. I had a glance through the view documentation 5.3 and she mentions that several monitors, nobody knows which is the maximum for multiple?

  Right, with the peak 4 PCoIP monitors, if you use RDP, then you can have up to 10.

  There is no change with view 5.3.

  Linjo

• video format for viewing on the iphone and android devices?

  Hello

  What is the best format to export a video so that you can see on iphone and android devices? Adobe supports this or is there another program should I buy? any help or ideas would be appreciated.

  Thank you!

  Denise

  H.264 works for iOS devices and Android devices. Here is a page with a list of the formats and specifications for Android:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  If you choose H.264 from the format of Adobe Media Encoder, you can then choose a bunch of predefined encoding settings for specific devices, including iOS devices.

• View of the Horizon from VMware and Microsoft Lync 2013

  Hello

  I am currently working on a VMware View Horizon project and the cap of the great exhibition is Microsoft Lync 2013. I had the matching between the vdi Lync plugin and the Lync client in the virtual office to work. During the process of matching the right icon indicates the attempt of local loading audio or video devices. When I connect a USB headset it detects and when I perform a test call, I hear only noise and not a good tone. Can I use only Lync support audio or video devices or it can be any USB device? I also mentioned the details of the current configuration of VMware View Horizon.

  Overview of VMware View: version 5.2.0 - 987719

  VMware composer: version 5.2.0 - 983460

  VMware View Client: version 5.3.0 - 1042023

  Virtual desktop: Windows 7 SP1

  Computer based mobile operating system: Windows 7 SP1

  Lync Server: version 2013

  Access virtual office: Sonicwall NetExtender

  
  

  Please see the following guide:

  The ABC's of deployment VMware Horizon discovered 5.2 with Microsoft Lync 2013 | Blog of Computing VMware for the end user - VMware Articles

  You should also be aware of the following:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2064266

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2045726

• Two view of the Horizon, active sites: that load swing and what on user profiles?

  Hi all

  I have two questions about an active Horizon view deployment.

  I want to deploy two deployments of Horizon view separate in two places, 400 users in total. Users will have a privileged place in which they use a virtual office (all stateless desktop computers). When the preferential site is unavailable the user should automatically directed to 'other '.

  What load balancer is able to do this?

  • The load balancer must be able to direct users to their favorite site.
  • a single point of entry tot the environment view should be used at all times, for example view.mydomain.com

  How can I get replicated user profiles?

  • In the case of a site failure the user profile must be available on the second site without staff intervention.
  • I was considering Microsoft DFS, but if I understand correctly DFS replication of user profiles is not supported?

  Thank you

  Jacques.

  F5:s is most commonly used in these scenarios, take a look on the "always on reference Architecture" of VMware.

  http://www.VMware.com/files/PDF/solutions/VMW-AlwaysOn-validated-design-guide.PDF