TestStand, CVI adapter problem

Similar Questions

• The connection has failed. Limited connectivity. Adapter problem

  Hello

  I use an Acer Aspire One Laptop that suddenly started running very slowly and taking a lot of time to stop and restart. I want to update all the drivers and software malware but cannot currently get online.

  When connecting to my usual wireless network I get the error: "the connection has failed. This computer currently has limited NETWORKNAME connectivity. "

  If I click on "solve problems" the end result is "it could be a problem with the driver for the wireless network adapter".

  Connection via an ethernet cable is not possible.

  If I run ipconfig/all, I get this:

  Suffix main Dns: (empty)
  Node type: hybrid
  Active IP routing: no
  WINS proxy enabled: no

  Card tunnel Teredo Tunneling Pseudo-Interface

  State of the media: Media disconnected
  Suffix the connection-specific DNS: (empty)
  Description: Teredo tunneling Pseudo-Interface
  Physical address: 00-00-00-00-00-00-00-E0
  DHCP enabled: no
  Autoconfiguration enabled: Yes

  Grateful for any advice.

  Thank you very much
  Sam

  Hello Sam,.

  It seems that this may be a problem with your network driver, may you please follow the steps below.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-GB/Windows/fix-network-adapter-problems

  If you perform the steps on which solves your problem with internet and your computer is still slow, I recommend you to install and run a scan with the following programs:

  Malwarebytes Anti-Malware, Junkware removal tool and AdwCleaner.

  Thank you.

• Environment programs began within a module of code Teststand, CVI

  What environment is seen by an executable file, which is started by LaunchexecutableEx() in a module of Labwindows/CVI code using Labwindows adapter in Teststand? Is is possible to change this environment?

  We noticed that an executable file, which creates directories for files logging and configuration in its installation directory data, which autonomous road, now creates these directories somewhere under C:\Dokumente und 4.2.1\ Instruments\TestStand Users\Dokumente\National All Anwendungsdaten launched from the CVI code module.

  The executable you are using is probably the addition of things based on the current working directory. It is not a best practice. If you have the source code for the executable, you should consider changing to use GetModuleFileName ( http://msdn.microsoft.com/en-us/library/ms683197%28v=vs.85%29.aspx ), passing NULL for the handle of the module to get the path where the executable file is located and use this path rather than the current working directory. I would say that using the working directory current is almost never the correct thing for a program to do it.

  That said, if do not have the code for the executable file and is enough to make it work, you can use the Windows SDK CreateProcess ( http://msdn.microsoft.com/en-us/library/ms682425%28VS.85%29.aspx ) function that allows you to specify a currentdirectory (I don't think that the environment is the problem in your case, I think that it is the current directory). Or you can use the type of executable step TestStand call place that has a setting for the current directory (I think they call it the Working Directory).

  Hope this helps,

  -Doug

• Best way to pass an array between TestStand, CVI

  Hello

  I was not able to judge or to find the best practice to pass arrays between TestStand and CVI. I'd preferably done in pass pointer to array. For example, if I have a function written in CVI DLLs:

  int GetAverage (double* aBuffer, double aSize, double* aAverage)
  

  TS I have an aBuffer double array [100]:

  -I can't simply pass

  GetAverage (aBuffer, 100, &aAverage)
  

  - or, I can go:

  GetAverage (&aBuffer[0], 100, &aAverage)
  

  -The only thing that is TestStand accepts:

  GetAverage (aBuffer[100], 100, &aAverage)
  

  I don't think not good because the size is just repeated.

  I had no problem if I could write

  GetAverage (aBuffer[100], &aAverage)
  

  but the problem is in this case there is no possibility fo CVI to determine the size of the table, like sizeof (aBuffer) just return, sizeof (double).

  Can you provide me with advice for best programming practices in this case?

  Concerning

  RB

  Hello

  Just in addition:

  Is there another way to access the tables.

  Often, I use for this task, the TS-API. The only parameter you need is in this context of the sequence.

  Maybe you should also visit this example:

  TestStand 2010\Examples\AccessingArraysUsingAPI\UsingCVI\AccessingArrays.seq

  Concerning

  Jürgen

• Strange Magsafe adapter problem

  I have a Macbook Pro 2011 and recently started using a new charger/adapter magsafe like old wore out. Initially the new charger worked fine but then the green light stopped show, and he stopped to load my Macbook. In order to isolate the problem, I borrowed magsafe adapter/charger my daughter and it worked fine and my magsafe adapter works fine on his Macbook. So what's past? If it's my computer then surely his charger would work either, but if it was my charger then how is he's working on his Macbook?

  I'm totally confused with this one... I have reset the SMC, but beyond that, I completely disagree... If anyone can shed some light on it or something, I would be very grateful!

  Magsafes are available in three or four sizes (power).   Yours is correct for your machine?

• laptop HP pavilion g6: ralink rt3290 802.11bgn wi - fi adapter problem does not not when turn on pc

  Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it

  Hi @eswar_krishna,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• USB Bluetooth adapter problems

  Hello

  I recently got a new Toshiba Tecra S1 (PM725) and an adapter Bluetooth usb (with More4you software).

  But I can't make it work with my nokia 6310i

  I installed new battery BT (Bluetooth Stack for Windows by Toshiba (3.10.00).

  Analysis of my nokia BT Manager, but when I want to connect to it, it immediately disconnects (after that I supported on accept connection on my nokia pairing) and the BT Manager gives the error: a not to connect to the following service: Dial-up networking. Connection request failed.

  I only installed the BT stack (from dir... BT package /US/) because when I run the installer from the main dir, it does not recognize my BT adapter. He keeps asking to put the int bt adapter.

  I had once it works, but with the next time you start it failed once again.

  Could you please help me?

  Hello

  Therefore, it is very difficult to say what the problem is. In my opinion, it is very important that
  -Adapter USB Bluetooth is installed correctly and working properly
  -Nokia must be added and installed as a new modem
  (The Nokia modem driver must be installed)

  It is not easy to help you because More4you and all settings and options there are unknown for me.

  I think before you start doing anything check there at - it problems with the USB adapter. Next step is the installation of the Nokia modem driver. I'm sure you have some CD or you can download it from the manufacturer's website.

  Please be careful with COM ports (you can use the standard port). In my case the standard port was COM 40. The same port, you must choose to install the modem driver.

  Try again. I'm sure that there is a problem with the settings. Check all out them again.

  If you discover that a problem was it please write again.

  Good luck

• Satellite P15-8409, Atheros wireless network adapter problem

  Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:

  The device cannot find enough free resources that it can use (code 12)

  The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.

  At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.

  I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.

  all the best,

  James

  BIOS version is installed on your machine? And you have you recently changed some hardware etc...?

  I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.

  Maybe the exchange of cards should solve this problem?

  Welcome them

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

• HP Paviliong9 notebookpc: battery or plug in pin adapter problems

  Laptop will not load.  States of icon is connected but does not support.    Has begun charging for less than 30 seconds maybe 3 times only, then goes to not charge mode.  Up to 60percent. My Jack works the ac adapter is only lukewarm. I can't calibrate my battery, it must be between 99 and 100 percent. What is my profile or is it my battery? Don't know? Help, please!

  @bigmikes1

  Please post on the Forums of HP,

  I'd be happy to help you

  As I understand it, the laptop is plugged into the adapter/charger, but it does not load

  Don't worry, though, as I have a few steps below that should help you to solve this problem:

  Disconnect the load and use the laptop until the battery drains in 15%.

  Turn off the laptop and turn it on again after 30 minutes.

  Reinstalled compatible Microsoft ACPI Control method battery in Device Manager,

  Restart the computer, and the problem should be solved.

  If you are unable to reach a resolution, please click on accept solution to help others with similar issues.
  If you like my assistance, , please click on the thumbs up icon.
  The two icons are below this post.

  Keep me posted and I wish you a good day
  
  Kind regards

• Mid-2015 MB Pro Power adapter problems black pine

  I had at least 10 portable Mac over the years and this is the first time I've seen that happen.

  The second axis on the adapter is black and will not charge the laptop. He's okay, sometimes if you stand up straight but it's absolutely not funny.

  

  You can easily see the problems with the charging port and adapter...

  

  Someone at - he seen this before?

  Does not seem an easy solution.

  All advice appreciated.

  Thank you

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Z580 - WLAN adapter problem

  I've got Lenovo IdeaPad Z580, with Core i7, 4 GB of RAM and 1 TB of HARD drive processor.

  A few months ago, I noticed that my BONES sometimes would freeze (make this beep sound freakin ') if I moved my computer too fast in my office (weird). She got worse a few weeks ago and seems to be somehow connected to my wireless network adapter.

  It especially simply - nothing works. Switch WLAN disappears from the BIOS configuration, etc., like it wasn't even there. If I'm lucky (as I am now), it would work somehow. All of a sudden appears again in the BIOS etc. I can even use it on my Windows 8, but... If I propose a little my laptop, it will suddenly freeze and restart causes WLAN adapter not in the system at all, or the connection is de-energized ("metered" stuff etc.). Restart adapter according to the results of system in "find no WLANs", wlan switch endangered or gel.

  I tried to reinsert the WLAN card, it sorta fixed stuff when I did it for the first time, I had a week or two without a problem, but he returned and reintegrated support is no longer.

  First question what I can do with this adapter WLAN problem?

  Second question is - while doing all this thing reinserting, my screws are a little bare now (but not completely, it is possible to get them unscrewed without any problem) because I have not noticed my screwdriver is broken and ruining. My laptop is still covered by the warranty? I do not have removed or broken any warranty seals in the process well, just the screws.

  I forgot to mention, by WLAN adapt is Atheros AR9485WB-EG.

  Information on repair mentions setting parts disconnected.

• Pavilion p7 - 1108p wifi adapter problem (running 8.1 Win)

  Expanded and published, the lack of resolution...

  Pavilion p7 - 1108p, running Windows 8.1.   Adapter Wi - Fi keeps releasing sporadically and without apparent reason.  I opened the network and sharing Center, and under active networks, click connections, and then click diagnose.  It resets the adapter and all is well.  I have two other computers and a tablet on this network, and none of them has this problem.  Please advise what the question might be: I have something set wrong?  Do I have a hardware problem?

  More info: when I use the troubleshooting tool to diagnose and reset the network card, I get 1 of 2 messages.  It's either.

  "" Wi - Fi"is not a valid IP configuration",

  or a message to both parties,

  "The connection between your access point, router, or model of cable and the Internet is broken. ” ;

  "The default gateway is not available "

  Please advise as soon as possible, because it is critical for having us this machine on-line 24/7. Thank you!

  You are the very welcome.

  If you have the problem fixed in a hurry, I'd consider having a network adapter wireless usb external of your choice.

  I use the Linksys AE3000 adapter dual band usb wireless with my HP 8200 Elite CMT on W8.1 64 bit and it worked without problem for months.

  It works great using the drivers W7 that accompanies it.

  Otherwise, you will have to wait for who knows how long for Mediatek fix the driver.

  You can disable the card in the Device Manager or physically remove it from its support if you want to add a usb wireless network adapter.

  Some of the reviewers said it did not work with W8/8.1, and some have fact.

  All I can say is that I had no problem to use drivers W7 supplied on mine.

  http://www.Newegg.com/product/product.aspx?item=9SIA24G1E39247&cm_re=AE3000-_-33-124-477-_-product

  Or you can get other brands...

• Pavilion p6210y: SATA host adapter problem

  Hey guys,.

  I think I found a problem with the SATA host adapter in a desktop Pavilion p6210y.  I find it difficult to restore the system after a hard drive replacement, and I discovered that if I have TWO hard drive and the CD drive unplugged so the machine will start.  If I plug the hard drive OR the CD, then the machine hangs on the HP BIOS screen.  Output voltage of the PSU is normal.  I think the guest card (motherboard) is toast.

  I did a little research, and it seems that it is a known problem with this motherboard.

  HP P6210Y does not detect hard drive

  This link may be the inlaid right.

  Card failure causes a MCP chip overheating, which controls the SATA ports.

  Here are some links:

  Ports of SATA HP Pavilion p6210y

  M2N78 - the motherboard does not see my records

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• TestStand 2012 launch problem

  Hello

  I have an annoying problem with TestStand 2012. Whenever I run the TestStand application a Visual Studio 2010 Shell dialog box appears "invalid license data. Reinstall is required. ». I have no Visual Studio is installed and I've ever had. I certainly never enter any license key. The same dialog box appears when you launch Version TestStand selector.

  I am running Windows 7 Professional 64-bit SP1. Only Microsoft that's installed products are SQL Server Express 2012 and the .NET Framework 4 Runtime. I tried to reinstall times TestStand and .NET Framework always the same dialog box that appears. If I just press "Close" in the dialog box, everything works fine, but really annoying needing to do.

  Someone at - he seen this before and have a solution?

  Thank you

  Mattias

  Mattias_Ericsson wrote:

  Hello

  Well, could work, but I really think that NEITHER should solve this problem properly. I am sure that many will have this problem more as SQL Server 2012 is becoming more common now.

  Thanks for your efforts in trying to help.

  Mattias

  This question, I recorded it in our tracking database. It will probably be addressed in a future release. You might want to try to install Visual Studio 2010 Express (I think it's a free download from Microsoft), or the alternative, I suggested.

  -Doug