Scanning from a new touchscreen PC from HP

Similar Questions

• How to scan from the iPad with new ePrint software?

  After having upgraded the software of the iPad to the HP Photosmart D110, I see more iPad detection option. Is there another way to scan from the iPad? I was hoping maybe you could scan from the printer directly to the cloud, but so far, it is not possible.

  Happyleaf,

  Try to download the HP Printer Control on the App Store app. It should support your printer and there's always the sweep feature.

  Let me know if it works for you.

• HP OfficeJet Pro 8710: Scan from the printer to laptop can leave laptop to the printer

  Hi I have problems with the new operating system for sierra on my macbook pro. I can manually scan from my computer to the printer and can print but when I try to scan from the printer, an error message on the printer, that is the counl scan could not be completed, make sure that the computer is connected to the printer and then try again. on the computer, the message is communication Scanner cannot be established make sure your device is turned on check the connection and make sure that your network is working properly if these conditions are correct restart the device and try to scan the image. I just had a llok in HP Utility under the menu fax and scan of the computer is not activated. The message asked me to go to support, but I downloaded the drivers twice and still it will not activate the scan of the computer. What am I missing to make this work.thanks for your help

  Hello

  Scan of the computer can be activated that the current software was conducted before Sierra.

  Software update should be available in the next few weeks to fully support the Sierra, for now just start analysis of your Mac.

  Kind regards

  Shlomi

• Unable to scan from officejet j4680 for Mac OS10.6

  I get an "unknown error" message when I try to scan from officejet j4680 on my Mac (OS 10.6).  I can print, but not an analysis.  Are there simple troubleshooting patches?  Thanks, Gil

  Restart the Mac,

  Apple menu > software update... Install updates

  If it does not perform these steps:

  • Applications
  • Uninstalling HP * warning step below it will remove all THE HP software *.
  • Hold down CTRL and CMD and Option on your keyboard while clicking on uninstall to remove all software
  • Apple menu > System Preferences > print and fax
  • Hold down the CTRL key and click in the white box on the left side.
  • Release CTRL key, and then click Reset printing system
  • Applications > utilities > disk utility
  • Check the permissions of the drive
  • Repair disk permissions,
  • Download the latest software from HP
  • http://FTP.HP.com/pub/softlib/software10/COL30074/MP-74787-1/HP_Installer_Officejet_Full_Group04_10.3.dmg
  • Install and try to start a new search

• Want 5530: problems with the scan from the printer

  Hello

  I only just bought a 5530 want all-in-one printer and it gives me problems from the outset.

  It installed fine, but when I try to scan from the printer to the computer I get the following window will appear on the computer:

  

  Which I think should happen. In my view, that he should start the correct software without having me to do anything.

  But even if I click on the "HP Scan", the software does not start, but it does not save the scan in the default location. I thought it was supposed to launch the software and allow me to choose what happened then.

  I can boot the computer software and scan as I want, but I think that to happen automatically if I scan form the printer to the computer (the printer).

  Someone at - it suggestions?

  Hi Rainbow7000,

  I had tried most of the steps that you propose before displaying the original question, but thinaks for suggesting it is useful to check.

  I managed to fix it myself.

  Basically the pop-up window was left during a previous installation of HP hardware. Even though I used the uninstall program provided, it was not completely uninstalled (annoying). So I uninstalled the new printer and then went through the registry and deleted any reference to previous material, the new printer, any other hardware HP, etc... I do not get into the registry to do this kind of thing but if the 'correct' uninstall program do not do so I have no choice.

  I then installed the printer again and it works fine. Now when I press the button it scans directly to the computer of choice and Windows Explorer appears to show the new file.

  If someone else is a similar problem and plan to do what I did then I have to remind you of the dangers of editting the registry...

  Thanks for having a look at this problem, your suggestions are appreciated.

• All-in-one HP 1536dnf: cannot scan from the ADF and glass to a single PDF file

  Hello

  There is a user who needs to scan some papers, but he wanted to do the following:

  -scan of the papers of the ADF

  and

  -scan of glass papers

  and he wanted to merge all this into a single PDF file.

  The announcement of the user he could do before, we implemented a new computer.

  On my side, I did the installation of the drivers and as the default scanning software and indeed the scan works, but once you star scanning from ADF he will not identify any which paper on the glass and displays the message "no book on ADF.

  And when you start scanning from glass it will identify ADF even if there are some papers. Instead, it will scan the same page, if she stays or it will scan empty.

  Well. It became a long text, but any help will be welcome.

  Thanks in advance

  Hello

  It works this way because they are TWO different operations. There are a few free software around which allows us to merge several PDF files into one file. You should probably do this way. The following link is one of them:

  http://www.PDFSam.org/download/

  This free product allows you to divide a large file to many small files (such as the extraction of the chapters of a thick book) and also merge several pdf files into a pdf file.

  Note: use the free.

  Kind regards.

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• I can print but not scan from my mac os 10.6.8

  I have a HP all-in - one 1315 printer connected to my Mac. My Mac running OS 10.6.8. I am able to print to the printer, but I cannot scan. Any help is appreciated more.

  Hello

  I'm afraid that the specific model, as a former model, only provided woth print drivers and no longer support scanning from Mac OS X 10.5, as you can find below:

  http://support.HP.com/us-en/document/c01234231

  * Even if the specific document on Mac OS X 10.5, same thing for any newer OS.

  To work around the problem, try the scan of 3rd party Vuescan software which seems to support the PSC 1315:

  http://www.Hamrick.com/VueScan/hp_psc_1310.html

  Kind regards

  Shlomi

• All-in-One HP Envy 7645: how to scan from Windows 7 computer again HP Envy 7645 all-in-one printer/scanner

  I am trying to scan from my computer windows 7 using my new printer, as shown above.  I used to have an IP address with my old printer wireless so that all I had to do was get in line and type it in and print management, scanning and ink tabs HPs came. That's how I scanned it.  I get that now.  What Miss me?  Drivers or software?  To be installed automatically, you would think! with a new printer... does anyone have a solution? Thank you.

  Hello

  I do not know why you can not install the printer software and driver on your computer. I now have a ready 7640 Envy (identical to your craving 7645, even software and driver) in front of me. I have ben the test using 3 different routers, more than a dozen of Windows machines, phones Samsung, Samsung tablets, tablets from HP, iPhone, iPad, Windows phones. I can't test one thing: Apple Mac machines because I have not I don't have any plan to buy one.

  Installtion shouldn't take more than 10 minutes for the first computer; pop the CD just in run and please select Wireless during the installation process. For Windows 8.1 Please also using the same CD to inatall why doesn't not fit the CD I don't know. If no CD, please download the following file and run as administrator

  http://ftp.HP.com/pub/softlib/software12/COL55963/MP-134720-2/EN7640_117.exe

  Kind regards.

• Scan from the printer to the pc wireless

  I have officejet pro 8600, it allows to scan to my pc, but I change to a new room and changed the password and now it will print and scan from my pc, but not the printer to the pc, I set myself until I have change the pass with the switch, but now who would not work and now I can't even come... Help please!

  Hello @kimsgirll1999,

  By the sounds of your post, it only appears that all background programs running on your Windows 7 computer is originally interference when trying to scan to your HP Officejet Pro 8600 e-all-in-one printer. Before the reactivation of these background programs can I please have you try the following steps.

  Enable the computer analysis:

  1. click on the HP Printer Wizard on your computer desktop icon:

  

  2. click on Actions of the Scanner, then Manage scanning to computer.

  3. click on Activate to activate the scan function. If the scan function is already enabled, click disable, and then click Activate again.

  4. on the printer control panel, press Scan (), support on computerand then tap the name of the computer that is displayed.

  If the scan of the computer working now, please activate your start-up services through the 'step 5: reactivate MSCONFIGthe steps I described in my post above.

  Once Msconfig services are activated, try to scan from the front panel of your printer to see if your computer is always present.

  Please let me know if this procedure works for you. Good luck!

• HP7520 all-in-one: can't scan from HP 7520 printers for iMac using Yosemite 10.10.1

  We have a new iMac that runs on Yosemite 10.10.1.  I try to get analysis of printer function works, but the HP printer window does not register the computer.

  So I downloaded and installed the driver for OS x 10.10 from the HP website.  The window on the 7520 now lists the computer when I click on the scan function, but analysis fails and the window indicates that the computer is not connected.

  The name on the file you downloaded says it's for "Snipers", so I thought that maybe it doesn't work with Yosemite?

  When I opened the printer on the iMac, the scanning settings, it tells me that "enable scan" function does not work and I need to download the latest version of the software of HP.

  I thought I did.

  Is it possible to make this work?

  Thank you...

  Thanks to two posts, I could solve this problem.

  I'll re-post the material to make it easier for someone else to follow if they have the same problem. I've marked this as the solution, but the credit goes to those who have posted responses in the thread, not for me.

  "The version of the driver HP - inkjet ink-SW-OSX - Mavericks_v12.34.44.dmg is compatible with Yosemite, it's just that the name has not changed.

  As I understand it, you are not able to use the analysis of the it function.

  Can you confirm if you have installed the full package including the HP scanning software. HP Scan is required for the scan of the computer to operate fully.

  (Yes, I had downloaded the site HP.com drivers for the 7520... but anyone who reads should make sure to do this).

  Open HP Scan and try scanning see if it works. (Goto Finders > Applications > Hewlett Packard > HP Scan)

  If you can't find the HP scanning means that the complete package is not installed. You can run the installation package and install the HP Scan.

  at this point, I clicked on the logo of apple (at the top left of the screen) and clicked on this computer, and there is a box to check updates.  When I clicked it, it showed he had a 3.0 update available drive.  (see below) I downloaded that, and the problem was solved!  Whoopie!  Just do not forget that you must download the software from the HP 7520 driver / in addition and make sure you install the "Scan" function Also, you need to, open the HP Hewlett Packard utility, enable the analysis of the computer and you should be able to scan from façade.

  If fails:

  (I never managed to this point because the driver download 3.0 in the box Update Apple to solve my problem, but perhaps others might want to continue with the following steps if they still have problems)

  Allows you to uninstall completely and start again.

  Go to the Hewlett Packard under Applications folder and run the HP uninstaller.

  Go to System Preferences > printers and Scanners > right click on the printer and select Reset Printing System ( Note: if there is another priner listed here will be deleted and you will need to add them)

  Go to disk utility and select the hard disk on which we install > click on check disk and authorization, then repair disk.

  Go to System Preferences > sharing make sure you have the name of the computer

  Run the update of Apple systems to ensure you have the latest version of the software available. (Make sure HP Printer Driver version 3.0 is installed, you can also manually search for it on apple's site)

  Run the installation package and make sure you only select all.

  Now, open utility HP Hewlett-Packard folder, activate analysis to the computer and you should be able to scan from front.

  Thank you so much everyone!

• How to scan from C3180 on Mavericks 10.9.2

  I recently bought a new Macbook Pro with the Mavericks 10.9.2.  I downloaded the drivers for my C3180 All-in-One on the HP site and can now print without problem.  However I can't scan and don't see any way to do it. There is no program of scanning HP or HP utility like here when I downloaded the drivers from the CD HP C3180 on my previous laptop.  What Miss me?

  Try scanning from your Mac. Use Image Capture app in your Applications folder.

  Click once on the scanner on the left side, and then click Show details on the background. Along the right side you will see MANY options for scanning and recording.

• HP c7280 not scan from Windows fax and analysis

  Why my scanner not scan from this windows fax and scan of program?  I have win 7-64 bit os, hp printer connected by usb. Everything works, but scan. I had downloaded originally Hp update for win 7 but I have a new hard drive and I really didn't want to upgrade their software at random here. I did 5 scans but it is only one per day. Then I get the message that he was able to complete the scan, I got the message that another program may be using the scanner,
  Is this a driver problem, it does not seems to me. It sounds more like a problem of windows 7 that the analysis files get mixed or not accessible, or they cannot be found.
  for the hp imaging device you need only 4 files:
  c:\Windows\System 32\drivers\ksthunk.sys
  c:\Windows\System 32\drivers\usbscan.sys
  c:\Windows\System 32\drivers\hpotiop1.dll
  c:\Windows\System 32\drivers\hpowiav1.dll
  I know there is a current specific problem and it is not with all these printers that have filled the forums. Is there anyway someone who knows the files could see what is happening?
  If you try to scan is supposed to appear in the process and services? The analysis of the test says it's although the printer is enabled. I had downloaded installed and software uninstalledHp from their site at least 12 times. But I note on installation sometimes that the hp installation page is different as if all the options are not listed as the file reading, or install the imaging device. Sometimes it would be just a Setup button. The software essentials and solutions had avaiilble different buttons each time. I'm in my intelligence
  end, try to understand this. If someone would like to just say that this will not work on win 7 so I quit.

  http://welcome.HP.com/country/us/en/contact_us.html

  HP contact link above.

  http://welcome.HP.com/country/us/en/support.html

  Link to HP drivers

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot print or scan from MacBook Pro to Officejet 6500 E709n after Firmware upgrade

  I have-

  MacBook Pro; OS X 10.5.8

  JO HP 6500 E709n: Firmware RBP1FN0935AR connected by Ethernet to my network.

  Also several XP and Vista machines machine.

  I have most of my printing and scanning of MBP.  I've updated the firmware the week last version (above) found under the XP software and drivers for this printer.  I thought more recent firmware is always better.  In any case, after that, I can no longer print or scan from the MBP.  I've uninstalled and reinstalled the software on my MBP 2 times.  And I followed the instructions on this forum for posts with similar problems.

  I can see the printer in the Systerm preferences > Print & Fax.  He is registered and has a green light.  I can navigate to the printer and connect.  I can not state of ink.

  BUT when I run the Setup Wizard, the printer is not listed in the window "select the device".

  When I do 'add devices by IP' and enter the IP, I get a message saying that it could not connect to the printer.

  I can print from my XP and Vista machines.  The XP machine is a virtual machine on VMWare Fusion on my MBP.  So I now transfer that I want to print my XP VM just to print it.  Is NOT IDEAL, but that market.  Hoping to solve this problem.

  1. I try to downgrade the firmware to the previous version.  Is anyway to do this?  How can I get the previous version of firmware?

  2. I would like to know what ports are used to connect to the printer?  If anyone can let me know, I'll see if my MBP has those blocked or not.

  3. If anyone can offer a solution, I would appreciated it.

  OK, I finally found this thing.  What happened was that my wireless connection does not (for reasons unknown at this point) my Mac to connect to the printer.  Even if I can get to the Web page.  Hello may not cross.

  Anyway, on a whim, I disabled the airport and used an ethernet cable to connect to the same switch the 6500 was conducting and reinstalled the software.  And whaddaya know.  I was able to install the printer, then did a scan and printing and a jig around the room.

  I disconnected the cable and turn on the wireless connection, once again, and wouldn't you know, HP Scan Pro can not connect to the 6500.  Is returned to the thread and it works.  Hmmm.

  I am due for an in new wireless access point.  The DLink and my Verizon FIOS Actiontec router sometimes do strange things.

  I'll still give you, PrintDoc, 1 kudo for loans to help.  And the uninstalling of 3 keys; It was new to me.

  I may be the only one who has never fallen on this, but it may be useful to say, do NOT take your connection Wireless for granted.  Always test everything.

  Thank you

• Scan from the printer HP for MacBook

  After the Update September 1, 2016 at the HP6500A, the scan from the printer to the computer software has become inoperative.  Printer cannot detect the MacBook Pro.  Can you help me?

  You might have better luck using the image transfer application on the pre installed in your folder scanner Applications.

  Help here > the basics of the Mac: using a scanner - Apple Support