TestStandModelReportOptions.ini in teststand 2012?
Hello
I just upgraded from Teststand 2010 to 2012. We have always had our teststand configuration directory points to a directory under our tree of source control. In this directory, teststand used to store changes to the configuration of the report in a file called TestStandModelReportOptions.ini. This doesn't seem to be the case more for 2012. It stores the configuration of report to which file? Is it possible to force the old behavior (stored in the configuration directory defined in Configuration/Preferences/Options of Configure Directory / Station)?
Thank you
David J.
The report and database configurations (and any other configuration of the processor of the result) is now stored in
So it is still under the specified configuration directory location, just in a subfolder.
Tags: NI Software
Similar Questions
-
I can't start TestStand 2012. I get this error.
I am administrator on my machine.
Tteststand 2012 was the only instalation I
Reinstalled .net framework 4.0 full.
Reinstalled teststand 2012
At TS2014, it works
Switched back to 2012 through the picker version TS-> always the same error
I can reproduce this error by manually editing the contents of a file of Type palletes.
<--------------- changed="" this="" to="" another="" value="" and="" the="" error="">---------------> .................
-
Hello
I have an annoying problem with TestStand 2012. Whenever I run the TestStand application a Visual Studio 2010 Shell dialog box appears "invalid license data. Reinstall is required. ». I have no Visual Studio is installed and I've ever had. I certainly never enter any license key. The same dialog box appears when you launch Version TestStand selector.
I am running Windows 7 Professional 64-bit SP1. Only Microsoft that's installed products are SQL Server Express 2012 and the .NET Framework 4 Runtime. I tried to reinstall times TestStand and .NET Framework always the same dialog box that appears. If I just press "Close" in the dialog box, everything works fine, but really annoying needing to do.
Someone at - he seen this before and have a solution?
Thank you
Mattias
Mattias_Ericsson wrote:
Hello
Well, could work, but I really think that NEITHER should solve this problem properly. I am sure that many will have this problem more as SQL Server 2012 is becoming more common now.
Thanks for your efforts in trying to help.
Mattias
This question, I recorded it in our tracking database. It will probably be addressed in a future release. You might want to try to install Visual Studio 2010 Express (I think it's a free download from Microsoft), or the alternative, I suggested.
-Doug
-
TestStand 2012 keeps the value of the variable
I have a problem with TestStand 2012 that preserves the value of the variable. I have a step and its parameters in the string variable. I use the expression step as Step.Settings += "00". I run the sequence under sequential model and the problem is that Step.Settings is equal to "00" on the first run, '0000' on the second throw, '000000' on the third race and so forth, but it must rest '00' on each race. I can't find the root cause. Anyone has the same problem and can advice how to solve?
Try to uncheck the properties of the sequence > optimize reentrant calls to this sequence to the sequence that contains the step.
-
The location of the file TestStand 2012 report variable
Hello
TestStand 2010 SP1, I have the "path to the report file' as one of the column in the database by using the RunState.Report.Location. He worked until I upgraded to TestStand 2012. The RunState.Report.Location is always empty. I also tried to use the RunState.Root.Locals.ReportFilePath, but I get an error that it is an unknown variable when you connect to the database. Even to remove the
in the expression of path of file below, there is no difference. I use the following report file path expression:
"C:\\TSReports\\
------ _Report [ ] [ ] [USE]" _ . ". Which variable contains the path of the report file in TestStand 2012.
I have not tried, but RunState.Report.Location can work if you set the new discussion of the report and the database on False (assuming that the report is the first in the list) so you can be sure that the report was generated before you check this value.
You must set set it up > result treatment > show more Options to see the options for new discussion.
This should give access to the report path is displayed (the one with the check mark in the display column). However, in TS 2012, you can have any number of reports.
There is a new recall, GetReportFilePath, you can add to your sequences to get the paths of the report they are committed. You can store the paths in a total station or varying lengths for use later, if necessary.
-
I want to use a drop-down list box (or a similar control) in a VI to select from a list of strings to direct execution in TestStand.
- How connect the channel selected in the combo box at the output of the VI Terminal so I can see it in TestStand?
- What should I use as 'value' in the parameter module TestStand to retrieve the result of that VI?
I tried "wiring" the result of the drop-down list box directly to a terminal of output without success.
I tried "wiring" the exit from the drop-down list box to a wire string variable then this variable to an output without success Terminal.
(see attached files)
Can someone give me an example of a VI that allows you to select from a list of strings: {'Bob', 'Mary', 'Bill', 'Jennifer',...} using a
(or similar) drop-down list box control and routing of the string selected to the output terminal?
Also, how to reference this (result) setting within TestStand?
It is a simple task and there can be only one solution TestStand, I'm looking for a simple direct execution sequence by the operator to select a string in a list.
I studied this problem, but could not find instances of the digital comparisons or string canned and did not find a generic model that would return a string to a VI to TestStand result.
Thank you for suffering through this fundamental question.
David
Melbourne, Florida
Marco beat me but here is my interpretation. TS 2010, LV 2011
Also, look at the example of demo which comes with TestStand: C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2010 SP1\Examples\Demo\LabVIEW\Computer Test of the motherboard
Demonstration should be a version of what you want.
See you soon,.
-
TestStand 2012, BatchModel treatment of intermittent problems result.
During execution of the BatchModel results are supposed to be going to separate directories for each Socket. What we see is that intermittently, the path is not correct for a few shots, that is to say the results for a socket will be written to the badly taken directory.
What could be cause the shells to the incorrect path generator?
To obtain the path and the following file names has been added to USE Start, in NI_ReportGenerator.seq:
Parameters.ModelPlugin.PluginSpecific.Options.ReportFileBatchModelExpression = ""-"
-... \\\Data\\\"+ Parameters.UUT.ModuleType + "-" + StationGlobals.JSFPNR.TestType + (Parameters.UUT.ModuleType == ""?) "" " (Reports\\\":"\\\Reports\\\") + Parameters.UUT.SerialNumber +" \ "+ Parameters.UUT.ModuleType +"[ ] - TR2_ _MSN"+ StationGlobals.JSFPNR.TestType +" _PN ["+ Locals.UUT.PartNumber +"] [ ] [ ] . " \"", Parameters.ModelPlugin.PluginSpecific.Options.BatchFileBatchModelExpression = ""-"
-... \\\Data\\\"+ Parameters.UUT.ModuleType + (Parameters.UUT.ModuleType == ""?) " (Reports\\\":"\\\Reports\\\") +" BatchReport [ ] [ ] . " \"" You can insert steps Lock acquire and release the lock "TestStand - determine report File Path Mutex" around the stage that you added AND current steps of determination of file report so that the report expression file values are not changed by a power outlet while being still used by another taken?
Lock: Acquire 'TestStand - determine the report queue Path Mutex'
Lock: Open early 'TestStand - determine the report queue Path Mutex'
-
From TestStand ExtraPuTTY installed
Hello
I am currently using TestStand 2012, specifically the version 5.0.0.262 according to the button ' words of TestStand 2012 ". I would be interested in using ExtraPutty to send commands to a test remote computer using SSH. I came across the following of document http://digital.ni.com/public.nsf/allkb/A254FE727B22258586257B6E002DF401. As suggested in the document, I downloaded the latest version of snapshot of ExtraPutty from this page: http://www.extraputty.com/download.php. And as mentioned in the same document, I have a problem from TestStand after the installation of ExtraPutty. The document suggests to change the file ExtraPutty.ini residing in TestStand 2012\Components\TypePalettes so that the version numbers correspond to the version of my installation of TestStand. In fact, I can find a file named 'Install_ExtraPutty.ini', but not ExtraPutty.ini.
In Install_ExtraPutty.ini, I found several seemingly relevant entries such as "Prodversion, TypeLastMod, Version", etc. Most had numbers like 3.0. I tried to change these numbers at different values (5.0.0.0, 5.0, 5.0.0.262, 5.0.0.252, etc.), each resulting in the next window, after having tried to launch TS:
I also took a look at the other .ini files in the same folder. All are difficult to read binary files. But I found what looks like to me (for the most part 5.0.0.0 and 5.0.0.252) version numbers which I also tried in Install_ExtraPutty.ini. Each time, the windows error above appears at the launch of TS.
I'm running out of ideas and any help would be appreciated!
Thank you
Christian DB
Hi Christian,
Even I tried to install and it did not work in TS 2012.
I did the following:
Downloaded the zip - ExtraPuTTY -
.zip version (binary, help files, examples...)Copied from ExtraPutty.ini to C:\Users\Public\Documents\National Instruments\TestStand 2012\Components\TypePalettes
TestStand open - it gives a conflict dialog box - choose currently responsible option.
Close TS - it should ask to save the ExtraPutty.ini file.
Copy the folder ExtraPuTTY-0-28 C:\Users\Public\Documents\National Instruments\TestStand 2012\Components\StepTypes\ExtraPuTTY-0-28
Open dialogue pallets Type (CTRL + T)
Right-click on extraputty.ini
On the right side window select function TL_init
Right-click Properties - dialog box opens
Click default button of the module - Check for path of the module.
Select the extra PuTTY DLL which is present in the folder copied above.
Repeat this operation for all functions.
Save the ini file (do not change versions if you are prompted for).
There are two DLLS in the PuTTY extra folder and one more. I assume it's the extra PuTTY dll only.
I hope this helps.
-
With the help of Extraputty 2014 TestStand
Curious to know if Extraputty is supported by TestStand2014. I installed Putty and the steps of teststand during the installation process. However, when you attempt to insert a step I do not get an option to extraputty as shown in the link below.
http://www.extraputty.com/features/TestStand.html
What is needed in order to start an SSH connection?
J Meye,
This is Ali from the National Instrument of engineering applications. Have you had a chance to look at these messages to the forum below? They are also Extraputty configuration to connect with TestStand 2012. Since there was not too much of a change of each software, did you have any success with following these steps?
ExtraPutty TestStand 2012 questions:
http://forums.NI.com/T5/NI-TestStand/starting-TestStand-with-ExtraPuTTY-installed/m-p/2596877#M43310
http://forums.NI.com/T5/NI-TestStand/starting-TestStand-with-ExtraPuTTY-installed/m-p/2596877
Review of SSH Communication:
http://digital.NI.com/public.nsf/allkb/A254FE727B22258586257B6E002DF401?OpenDocument
Problems with 64-bit:
http://forums.NI.com/T5/NI-TestStand/SSH-and-64-bit-TestStand/m-p/2961873#M46440
In addition, it is a 32-bit system? There was configuration problems with 65-bit with Extraputty systems.
-
Wired OR XNET session with TestStand causes Hex 0xBFF6309C error
Hello
I'm trying to access a Controller LIN via code (2012) PXI-8516, OR XNET and of LabView, TestStand (2012).
To the point where "XNET session creation", I created two sessions (one for writing, for reading), everything works in LabView and without errors. Then I put these sessions to an indicator in TestStand. It sessions are stored in the premises and put them in the next call where I ty to send a frame.
The result is always a 0xBFF6309C aka 1074384740.
A test program that keeps everything in a States Labview machine behaves as expected and sends the frame without problems.
The error for me text sounds me a bit as if sessions are not particularly be crossed TestStand.
Everyone has experienced similar problems?
Best regards
Søren
Solved!
Obviously XNET him quite like if the screw using XNET not stored in the reserved State. It is a setting of the adapter of LabView in TestStand.
To avoid unpleasant surprises and days of searching for error when porting software to an another machine-TS, you can also set the setting of the card by a line of code:
RunState.Engine.GetAdapterByKeyName (FlexLVAdapterKeyName). AsAdapter.ReserveVIs = True
I always consider this behavior if it is a bug, then at least a problem. If keeping the session in respect of these circumstances is not possible at least that TestStand should provide a better error message pointing out what happened.
-
Run the sequence TestStand silently in c# with report
Hello
I use TestStand 2012 SP1 and Visual Studio 2010.
I want to run a TestStand sequence silently in my c# software.
I saw on this web site, how to run a TestStand sequence (https://decibel.ni.com/content/docs/DOC-29585).
This example is really interresting to know how make it work using the .NET interop API.
The problem that I can't solve is that no report is created during execution of the sequence, although I added a step to configure the ReportOptions.
Here, you will find the class that I use to start the TestStand sequence:
public execution StartSequence (string sequenceFilename, string resultDir, out SequenceFile seqFile)
{
Run exec = null;Try
{
The admin user = Engine.GetUser ("administrator");
Engine.CurrentUser = admin;SequenceFile seqFileModel = null;
StationOptions stationOptions = Engine.StationOptions;
stationOptions.DisableResults = false;
stationOptions.AllowOtherModels = true;int flags = 107; GetSeqFileOptions.GetSeqFile_OperatorInterfaceFlags;
seqFile = Engine.GetSequenceFileEx (sequenceFilename, flags, TypeConflictHandlerTypes.ConflictHandler_Prompt);bool modelExists;
String modelPath = seqFile.GetModelAbsolutePath (on modelExists);
seqFileModel = Engine.GetSequenceFileEx (modelPath, GetSeqFileOptions.GetSeqFile_NoOptions, TypeConflictHandlerTypes.ConflictHandler_Prompt);Configure the report options
int reportOptionCallbackIndex = seqFile.GetSequenceIndex (DefaultModelCallbacks.DefModCback_ReportOptions);
If (reportOptionCallbackIndex > - 1).
{
seqFile.DeleteSequence (reportOptionCallbackIndex);
}
Sequence reportGenCallback = seqFile.CreateCallbackOverrideSequence (DefaultModelCallbacks.DefModCback_ReportOptions, false);
InsertStatementStep (reportGenCallback,
'Parameters.ReportOptions.DisableReportGeneration=False,\n ' +.
'Parameters.ReportOptions.GeneratePath=False,\n ' +.
Required string. Format ("Parameters.ReportOptions.ReportFilePath=\" {0} \",\n', GenerateReportFilename (resultDir, sequenceFilename)) +.
'Parameters.ReportOptions.UseOnTheFlyReporting=True,\n ' +.
"Parameters.ReportOptions.PurgeOnTheFlyResults = True");exec = Engine.NewExecution (seqFile, "Single Pass", seqFileModel, false, 0, null, null, null);
exec. Report.Location = resultDir;
}
catch (Exception)
{
throw;
}return exec;
}What's wrong with my code and what should I do to obtain a report related to the only passes?
I hope someone will help me
Best regards
CFOE
Hello
This code works very well I just forgot to manage performance by querying messages.
Best regards
CFOE
-
I can't install NI Veristand engine RT to LabVIEW RT 2012 2011
Hi all
Since I'm pretty new to this Board, excuse me I'm double questions...
I work with:
System RT: PXI-8135
Software:
LabVIEW 2012
NEITHER Veristand 2011 SP1
NEITHER Teststand 2012
I am currently trying to get my simulation Veristand work correctly. So this means I have to install NOR Veristand Engine to RT target using MAX.
I heard the message (see attachment) when installing.
Question:
Is it possible to install NI Veristand engine 2011 my RT controller that has motor in time real Labview 2012 without downgrading my 2012 LabVIEW for 2011?
Any help would be appreciated...
Thank you
Rajamodol
Hi Rajamodol,
the following document describes the compatibility of facilities of LabVIEW VeriStand:
http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751
VeriStand 2011 SP1 requires a LabVIEW 2011 or 2011 SP1 installation.
Best regards
Peter
-
What are the current versions of Labview and Teststand
Hello
I currently am downlading the current versions of teststand and labview for evaluation.
The Teststand-link I saw that it is called "Teststand" 2012.
1 but there is no version information in the Labview download. Is also 2012 version?
2 is the two 32-bit-software things?
3. After installing the evaluation-downloads - can they be activated with a key, or what I need to install again when the CDs arrive in my office?
Thanks for help
Iliale wrote:
Thx for the links.
I am using Windows 7 64 bit - I'd rather then also Labview 64? (Links to download NOT only provides 32-bit for download)
There will be problems with my existing 8, 5 - screw Labview conversion to the new Labview2012?
Thank you
You can have as many 32-bit and 64-bit installed. Don't forget your target when you generate an exe file. 64-bit compiled programs can run on 64-bit computers.
You should have no problem upgrade your code of 8.5.
-
get all the help files for teststand
I used TestStand "help" to get information about a property that a colleague of mine recommended that I look at, and the research gave "no topics found. My colleague ran the same search (check the spelling and the parameters are the same) and he got 4-5 topics. Is there a way to check if I have all the documents/resources help and if I can't how to change?
If you use TestStand 2012, please upgrade to SP1 of 2012 TestStand, which corrects the problem of search in the help system. You can also access the help of TestStand 2012 on ni.com.
-Callie Jones
TestStand Documentation team
-
After the installation of TS 2012 - stop time about 16 minutes.
Problem after that installation of LabVIEW and TestStand will take about 16 minutes to turn off my laptop. Problem may be in TestStand 2012, see below.
Lenovo laptop T520 Intel i7 processor 64-bit with Service Pack 1 Windows 7 Enterprice.
How to install the development versions (all installed with OR by default):
1 LabVIEW 2011 SP1
2 TestStand 2010
3 TestStand 2010 SP1
4 LabVIEW 2012
Stop time: less than 15 seconds
5 TestStand 2012
Downtime: about 16 minutes. The screen changes to the Windows 7 logo and mouse cursor still visible after 9 minutes it turns into 'Stop' and mouse cursor are deleted and it shuts down after 16 minutes.
6 uninstalled TestStand 2012
Stop even
7 uninstalled the Version selector TestStand and TestStand 2010 & 2010 SP1
Stop even
8 uninstalled TestStand Version selector (always installed, maybe another version?), NI Session Manager & NI TDM complement 3.4
Stop even
9 uninstalled all NOR (LV 2010, 2010 SP1, 2012 and MAX ++). Why not all the packages of TestStand disappear above 6, 7 and 8 - could see some TestStand packages have been abolished in 9?
Stop time: less than 15 secondsHi BanjoBoy,
It would be better to post this question to the forum TestStand. NEITHER VeriStand is produced different.
http://forums.NI.com/T5/NI-TestStand/BD-p/330
Kind regards
Jiri
Maybe you are looking for
-
My settings have disappeared after upgrade on iPad mini
I have lost the settings of my iPad mini icon
-
There are some days that I installed the latest version of iTunes. I've also updated my iPad 2 and iPhone 4 iOs 9.3 sec. Now I can not activate the iPad and iTunes on my PC does not show the iPad, or iPhone. I've gathered that the Apple mobile device
-
OR handset and other relays in the direction of the switch
Hello I am beginner in products OR and now I want to solve a problem. If I know the relay and their connection paths. These relays are of NEITHER and some other producers. Can I Switch Executive put first and last point and automatically will join th
-
Hello I'm using a ThinkPad T410 with Gobi WWAN card 2000 (9205). My question is, Lenovo provides us with a universal 3G dialer? Why I ask because I use the Dialer to Vodafone can only dial certain telco on SIM card. I need a dialer that is universal.
-
How to reinstall the hp to Win 8 software?
Very disappointed with hp - no email does support for the old printer 3 yr: Photosmart Premium Fax C309a. The problem: "Upgraded" from Vista to Win 8. program solutions HP is gone! I use it to scan from office. Tried to reinstall from the CD (ver 13.