Texas Instruments PCI-1031 PCMCIA controller

It's telling me that when I put a pc card in the notch of the pc that it has detected it, but the firmware is not in front of it allow the cardbus controller work in cardbus mode. Is anyway to fix this?

My computer specs are:

Compaq Presario 1210

Intel Pentium Prossesor @ 149 MHz

192 MB OF RAM

1.34 GB disk HARD Windows XP SP1

It's telling me that when I put a pc card in the notch of the pc that it has detected it, but the firmware is not in front of it allow the cardbus controller work in cardbus mode. Is anyway to fix this?

My computer specs are:

Compaq Presario 1210

Intel Pentium Prossesor @ 149 MHz

192 MB OF RAM

1.34 GB disk HARD Windows XP SP1

What PC-card brand and model?

The closest info from you, that I found on this is a Microsoft KB article that describes a very similar error message.  The reason given in this article, it's that the TI PCI-1130 on Windows 2000 Professional supports only a 16-bit device.

Now, you have another controller of TI and you are not using Windows 2000 Professional, but your system is extremely outdated if she has XP service pack 1.  Assuming that whatever cards you are supposed to be supported in Windows XP, I suspect that you need to install service pack 3 and following updates critical.

Steps to take before you install Windows XP Service Pack 3

Conditions required for successful installation of XP Service Pack 3
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

Do not neglect the precaution to disable your antivirus during installation and do not forget to read the notes on AMD processors, if your computer has one.

Tags: Windows

Similar Questions

  • What can I do when Texas Instruments PCIxx12 Integrated FlashMedia Controller is not compatible with Windows 7?

    I have a gateway C - 140 X for a good 2 years and I find always the best of the class. The current version is Windows Vista Ultimate Edition.  The upgrade path should be got Windows 7 Ultimate, which, incidentally, should some sort of reduction but I understand he must make an economic profit.

    I ran the Windows 7 Upgrade Advisor Beta .

    Report all gave his go-ahead, but one Texas Instruments PCIxx12 Integrated FlashMedia Controller by Texas Instruments Inc. device is not compatible with Windows 7. So I can't upgrade once the device is compatible.

    The obvious answer is to consult the website of the manufacturer of Texas Instruments or gateway OEM.
    The gateway OEM does not help because it has stopped supporting once he sold to MPC, which then went bankrupt while the drivers are available on the gateway site to download only for Windows Vista.
    Looking at the site of Texas Instrument is a maze leading to difficulty finding support on the device in question. I'll try to contact the support from them, but what do I do? I mean the device is able to run Vista and other Texas Instruments products are compatible but just the card reader.

    If you tell me to new contact the third party or the manufacturer's website, then I ask that you give me the link to the support or the driver.

    I tried to control the Windows 7 Compatibility Center , but it is not upward.

    I got it.

    After the upgrade from 32-bit Windows Vista Ultimate 64 bit of Windows 7 Ultimate that required me to do a clean install. I prefer clean install because it is sure that everything works. Yet once I was pounded by an unmanned aircraft. In the hardware Manager, he has been shown as a mass storage controller. I forgot my card reader and more worried about trying to get the driver for the mass storage controller because it seemed important to something. Then I let down, but after a few days, I looked around the same instance in the forums which turns out be my card reader. I went back to the drivers from the website of the gateway for card reader Driver .

    I just installed the Vista driver and now it works. Everything on my computer now works with Windows 7 64 bit by going to manufacturers for devices. Broadcom Bluetooth.
    Wired and wireless from Intel.
    Mass of Intel storage.
    The rest was from Windows Update, check all out them.

    The only thing I feel crazy is that send to Onenote 2007 is not compatible with 64 bit OS and the strength to wait for the next version of Office for it to work.

  • Windows 7 driver for Texas Instruments PCIxx12 Integrated FlashMedia Controller.

    I plan to upgrade to Windows 7 on my Sony Vaio VGN-AR61M Vista Home Premium.  I ran the Windows 7 Upgrade Advisor Beta, which showed that everything was OK except for the following:

    "Texas Instruments PCIxx12 Integrated FlashMedia Controller.  An update is needed to make this compatible with Windows 7 device. Go online to get the latest driver from the manufacturer website»

    I tried to find an updated driver from the site of Texas Instruments, but have failed to find one, here or elsewhere online.  Does anyone have an idea where I could find it, please?  The current driver is Version 2.0.0.18.

    Hello

    If it is a built-in device, the best place to get the drivers would be Sony.

    Go to the following site, enter the model number of the Vaio and click on continue. This takes you to the page where you can download the drivers for all the devices installed.

    Sony eSupport - Electronics - Home Page

    Thank you for using Windows 7 Ronnie Vernon MVP

  • I'm trying to find/reinstall Texas Instruments PCIxx12 Integrated FlashMedia Controller. Mine does not work.

    How and where can I find an update or replacement of the Flashmedia controller? (there is a yellow question mark by the icon in the Device Manager). In the Device Manager (just above), he said I have also no video controller (once again the yellow question mark) so I guess I should find a way to fix first. Now the videos play in a video with audio stuttering jerky. Any help would be greatly appreciated.

    Both pis but thanks anyway. I saw in another thread that I needed to get them at Toshiba and it couldn't have been easier and it couldn't worked no better. YAy! and thanks again.

  • Satellite A200 - I need to driver for Texas Instruments flasmedia

    Hello, I have install Vista Home Premium 64 - bit in my laptop and I need a Texas Instruments PCIxx12 Integrated FlashMedia Controller.
    I put t know where I can find it.

    Can someone help tell me where can I find this driver?
    Thank you

    OLA JOSE

    Please first consult your A200 model number because there are different models of Toshiba A200.

    But that Joey has already said the card reader controller driver is available on the European driver Toshiba page and after the installation of your card reader internal should run using Vista 64 bit.

    Mucha suerte ;)

  • Chronic problem with T, controller extensible Texas Instruments USB 3.0 - 0096 (Microsoft)

    Hello

    I have an Office Smart Touch of All - in - One HP Envy 23-d060qd; It's a very nice system and it is running Windows 8.1; connected to one of the two ports USB3.0 is a Seagate drive upward.

    I have a chronic problem that has quickly become very tedious.  At least once a day, for no apparent reason, the sysem disconnects the drive on which is pinned to the USB 3.0, reporting the 43 error when I run the Device Manager.  The system has an expandable controller of Texas Instruments USB 3.0-0096 (Microsoft) and it has a driver version 21/02/14: 6.3.9600.17031.

    I read that he knows the problem and that it has something to do with USB3.0.

    Can anyone help!

    Thank you very much

    Finally, problem got resolved when Microsoft released a updated driver

    Thank you

  • Realtek PCIe GBE Family Controller

    Why can't I find the Realtek drivers without someone wanting to buy me this wizard or the program of this kind? It's crazy, that I just want to keep my drivers up to date. You shouldn't go out and buy these rediculas priced at programs to keep the computer I already paid for. James a. mountain

    Hi James,

    ·         What Web site you use to download the Realtek drivers?

    It is always recommended to consult the instrument vendor's site or software to get the right and compatible driver for the device driver.

    You must visit the Realtek website to download the drivers for the Realtek PCIe GBE Family Controller.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP ProDesk 600 g: PCI Simple Communications Controller

    Have just reinstalled Win 8.1 X 64 on my system after replacement of H/D using HP provided disks. Noticed I had three errors re no driver installed. Resolved to the third question but have tried various links on the forum but with no joy re these detailed below. Someone at - it an idea. Concerning

    PCI Simple Communications controller

    Device PCI VEN_8086 & DEV_8C3A & SUBSYS_18E7103C & REV_04\3 & 11583659 & 0 & B0 has been configured.

    Driver name: null
    The class GUID: {00000000-0000-0000-0000-000000000000}
    Driver date:
    Driver version:
    Driver provider:
    Section of the driver:
    Rank of pilot: 0x0
    Matching device ID:
    Advanced driver:
    Update of the device: false

    PCI serial port

    Device PCI VEN_8086 & DEV_8C3D & SUBSYS_18E7103C & REV_04\3 & 11583659 & 0 & B3 has been configured.

    Driver name: null
    The class GUID: {00000000-0000-0000-0000-000000000000}
    Driver date:
    Driver version:
    Driver provider:
    Section of the driver:
    Rank of pilot: 0x0
    Matching device ID:
    Advanced driver:
    Update of the device: false

    These devices are part of the functionality of 'Remote Management' - a system centralized on a corporate network administrator can access the computer and make updates.

    Did you run the "HP Support Assistant"?

    He should find the missing device drivers of "AMT".

    Of course, if you are the only 'administrator', there is no need to install support - your computer will work fine without it.

  • Desktop HP Pavilion 500-220ex: drivers of HP Pavilion 500-220ex desktop PC: PCI Simple Communications Controller + SM Bus controller

    Hello

    I tried to update my drivers "PCI Simple Communications Controller + SM Bus controller" obsolete Wizard support for HP and HP Customer Support - software and driver downloads Web site, but I still get the following message "we couldn't retrieve the list of drivers for your product.  Please select the desired operating system and select "Update" for a new attempt."

    Help, please.

    Thank you

    Hello:

    I have not had any problems to access the page W8.1 of the driver for your model using IE11...

    You need these drivers for devices... I've posted direct links, so you shouldn't have problems to download the drivers.

    PCI Simple Communications controller:

    This package provides the driver for the Intel Management Engine Interface solutions in the supported models that are running a supported operating system.

    File name: sp64495.exe

    SMBus Controller:

    This package provides the driver for the solutions Intel SMBus Controller in the supported models that are running a supported operating system.

    File name: sp64494.exe

  • HP Compaq DC5800: No. - Pci simple communication controller

    All hell

    After doing some maintenance my device manager is displayed.

    PCI simple communication controller

    The drivers for this device are not installed. (Code 28)

    There is no compatible driver for this device.

    PCI bus 0, device 3, function 0

    PCI\VEN_8086 & DEV_29D4 & SUBSYS_281E103C & REV_02

    PCI\VEN_8086 & DEV_29D4 & SUBSYS_281E103C

    PCI\VEN_8086 & DEV_29D4 & CC_078000

    PCI\VEN_8086 & DEV_29D4 & CC_0780

    I worked the last time I did the maintenance

    I tried pilot different analyses and the results are not new drivers needed.

    I also looked at the count with the same results.

    Thanks in advance

    Hello:

    You need the driver for this device...

    This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.

    FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46137.exe

  • HP compaq t4400: PCI simple Communications Controller Driver XP

    My PCI simple Communications Controller Driver XP is missing... where and how download? someone? Please

    This is my id hardware PCI simple Communications Controller Driver XP:

    PCI\VEN_104C & DEV_803D & SUBSYS_30B1103C & REV_00
    PCI\VEN_104C & DEV_803D & SUBSYS_30B1103C
    PCI\VEN_104C & DEV_803D & CC_078000
    PCI\VEN_104C & DEV_803D & CC_0780

    @strike88

    Try this one.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1849072 & swItemId = ob_70996_1 & swEnvOid = 1059

    REO

  • HP Compaq DC7700 Small Form Fa: Driver PCI simple communications controller windows 8.1 64-bit

    I can't find the driver for my PCI simple communication controller that is compatible with 8.1 64-bit windows. could someone point me in the right direction (if all goes well a link to the driver I need)? I have already spent a lot of time to research.

    As I wrote above... If automatic installation method does not work, you must manually install the driver.

    Here's how to manually install the driver...

    Go to Device Manager and click the controller of simple communication IBOS who need the pilot.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp34743.

    Make sure that the include subfolders is selected and the driver should install.

    Then restart the PC.

  • Satellite P500 - 1 CG - PCI Simple Communications controller driver for Win 7

    I reinstalled the system in my Satellite P500 - 1 cg, because it was in English and I use the Polish language.
    After the reinstallation, I have a problem and I need a "PCI Simple Communications controller / pilot.»

    Can someone help me on this?
    Thanks in advance for any help...

    Hello

    To be honest PCI Simple Communications Controller does not for me
    I think that there is a translation error.

    Please check this doc from Toshiba:

    How to identify an unknown device
    http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

    It helps you to identify the device and find the right driver.

    Welcome them

  • 2000-2d13CA HP: another ethernet device drivers controller/PCI device/PCI simple comunication/controller SM Bus

    I just reinstalled windows 7 on my HP 2000-2d13CA lappy, but problems with the following device drivers:

    Ethernet controller

    PCI device

    PCI simple communication controller

    SM Bus controller

    Please help with the procedure

    Hello:

    First install the smbus controller driver and restart the PC.

    This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

    File name: sp56670.exe

    Ethernet controller:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp56680.exe

    PCI device:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp64801.exe

    PCI simple communication controller:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp56675.exe

  • Ethernet and PCI Simple Communications Controller Drivermissing controller driver

    Hello

    I recently installed Windows 7 Ultimate on my desktop Hp Pro 3500 Series MT, but I can't the right Ethernet controller driver and the driver PCI Simple Communications controller from the internet.

    The Hardware IDS are as follows:

    Ethernet controller:

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C & REV_06

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C

    PCI\VEN_10EC & DEV_8168 & CC_020000

    PCI\VEN_10EC & DEV_8168 & CC_0200

    PCI Simple Communications controller:

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C & REV_04

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C

    PCI\VEN_8086 & DEV_1C3A & CC_078000

    PCI\VEN_8086 & DEV_1C3A & CC_0780

    Please help.

    E - IT says:

    Hello

    I recently installed Windows 7 Ultimate on my desktop Hp Pro 3500 Series MT, but I can't the right Ethernet controller driver and the driver PCI Simple Communications controller from the internet.

    The Hardware IDS are as follows:

    Ethernet controller:

    http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C & REV_06

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C

    PCI\VEN_10EC & DEV_8168 & CC_020000

    PCI\VEN_10EC & DEV_8168 & CC_0200

    Simple controller PCI of Communications: (it is in fact the interfaceur Intel Management Engine)

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = VC-93346-1 & mode = 4 & IDX = 1 & prodTypeId = 12454 & prodSeriesId = 5037931

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C & REV_04

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C

    PCI\VEN_8086 & DEV_1C3A & CC_078000

    PCI\VEN_8086 & DEV_1C3A & CC_0780

    Please help.

Maybe you are looking for