Text design question

Similar Questions

• ISE design question

  I have a few design questions about ISE v.1.0.4.573

  1. The ISE 3395 gigabit ports are supported on the aggregation of links?  How can I use all 4 ports uplink?
  2. When you perform an installation of 2 x 3395 HA, is there a connection of heart rate between the two ISE or they will use the same link to the network of pulsing and synchronization?
  3. I'm designing ISE with WLC. My setup WLC (5508) looks like 5 floors with different VLAN but same SSID. How can I do ISE authenticate in this scenario because WGB AP is not supported in ISE v.1.0. Is there a work around for this type of WiFi to the ISE configuration?
  4. Continuous configuration above, roaming from one floor to another floor after changing of Vlan, the user will be re - authenticate or use the same session?

  Thanks for the help.

  Kind regards

  Zohaib

  1. the current version does not support the aggregation of links...

  2. they use the same link to the network of pulsing and synchronization.

  3. my suggestion is to assign your SSID, a group of interfaces, containing all interfaces belonging to your VLAN, on your WLC and set AAA replacement. And then, at ISE, create authorization profiles include the appropriate VLAN. Use the Called-Station-ID RADIUS attribute with your MAC address of the AP as a condition.

  4. they use the same session.

• Adobe Acrobat text Configuration question Mac

  Hi I am currently using Adobe Acrobat on my macbook. I downloaded a pdf file and in the police box he showed with the appropriate text 'Open without Semibold' name. However when I try to add text it turns in a different font and it does not list the original fonts in the text selection bar. My question is how can I use the same font (open without Semibold) if I want to add or change text?

  You can refer to this,

  Cannot modify a pdf file of the document - new installation of Acrobat pro

  Adobe Acrobat X Pro * editing text

  https://acrobatusers.com/tutorials/how-to-edit-text-in-a-PDF-fil

  They could help you.

  Concerning

  Stéphane

• vSphere 5.0 and 5.5 SSO design question

  Hi all

  Currently we have a configuration with two virtual center servers installed.  One at our Production site and one on our site of Dr.  Our site of Production and the location of the DR are in a different location in the city, they are currently on a dish network, but this is subject to change to treat us like a totally different place.  We also currently do not use vCenter Linked Mode because we don't have two vCenters and like separation, however if its requried we can install it.

  The plan is to upgrade the DR site first to iron out everything before the upgrade of the production, with that said we where thinking about install SSO as such:

  http://www.VMware.com/files/PDF/vCenter/VMware-vCenter-Server-5.5-technical-whitepaper.PDF

  Page 11: I joined the design image

  We think where to install the first SSO on the site of DR and when completely modernize us our production site install an another SSO as another site to keep the replcatio SSO in place aka option:

  vCenter Single Sign-On for an additional vCenter server with a new site

  The end config looks like the second ssoconfig2 of attachment

  I wanted to just a few oppinons on this choice and if this is the best way to go with what we design.

  
  Any help is greatly appricated,

  
  Thank you

  Hello

  I mean, this is Option 3 will be necessary if you want to use related modes.

  With regard to your questions:

  1. Yes, you can keep the two separate vCenter and a simple installation or see option 1 install both

  2 linked Mode requires option 3 works. But you can still use Option 3 without related modes if you want to have the replication of single-domain SSO (means that if you create a user in SSO VC1, it is replicated to the other SSO).

  Let's say you do not use option 3 for your second vCenter, subsequently if you decide to use bound mode, you must uninstall and reinstall SSO for your second vCenter to shape Option 1 to 3 Option replication of your first vCenter

• Fashion design question (several sites)

  Hello

  I test View5 to vSphere5 and I have a question of design across multiple locations. See the image below. We have two locations, each has its own data center. Unfortunately, these two specific locations are currently connected only via an internet VDSL 20/20 Mbit connection and it is now improving.

  The LOCATION 2 is actually an office with many clients and also its own small data center (also based in vSphere5). The primary data center is in LOCATION 1 and is where I would put all my workstations virtual (not only for LOCATION 2, but for all the other places as well) and where the view connection manager will be. The problem is that on the LOCATION 2 (office) there are some servers of files users on this site using heavily.
  
  

  Question No. 1:

  (a) selling virtual offices on LOCATION 1-> in this case PCoIP will provide me with a pretty good connection, the problem is to access the file is used on 1 LOCATION of virtual desktops (it's GREEN Lane).

  (b) selling virtual desktops on the LOCATION 2-> in this case will have to go through the Manager connections, then the Virtual Office on the 2 LOCATION and to the customer... no idea no how this work (it's the PURPLE path)... it seems like a heavy network load? However, that could result in a quick access to files on the LOCATION 2 servers.

  Another solution is to put the Connection Manager view also in LOCATION 2, but that would make me administer another system, and I want to keep things simple.

  What do you suggest me?

  Question No. 2:

  I have to route traffic to LOCATION 2 to 1 of the LOCATION where the view connection manager lives by VPN or is the PCoIP traffic encrypted by itself and is OK to put it in the DMZ (controlled)?

  Thanks for the help!

  

  The Orange path in the attached picture would be more precise if secure tunneling has been disabled?

• Formatting text in dynamic text classic question

  I ran into a problem with a dynamic text field in an AS3 project. Here is the basic scenario:

  The scene is a classic text - filed a dynamic text. I'm loading the html from an external file content in this text field.

  html code example:

  <p>Some in a p tag</p>
  <ul>
  <li>a list item</li>
  <li>a list item with <span class="red">red text</span></li>
  </ul>
  <p>Some other text in a p tag</p>

  I am loading an external CSS document via a URLRequest and URLLoader

  var req:URLRequest = new URLRequest("myStyle.css");cssLoader = new URLLoader();
  cssLoader.addEventListener(Event.COMPLETE, cssLoadComplete); cssLoader.load(req);
  

  to complete the analysis of the css and applying the text field

  sheet.parseCSS(cssLoader.data);
  // apply style sheet to the myText
  myText.styleSheet = sheet;
  

  The question that I am running is that the balls on a bulleted list are inheriting the color of the class expanded inside of them, in the above case, there is a range of 'red text' inside the list item. I expect only the 'red' text to be red but the ball for this list item is red as well. Everything else it seems is applied correctly.

  I'm pretty stummped on this one. If anyone can offer suggestions or help, it would be most appreciated.

  It will certainly solve the problem. You just need to use a version of flash that supports / export TLFTextFields (latest versions). I don't know how old is your project. Good luck!

• Film text InDesign question

  Hello indesigners.

  I have 2 columns of text and have an ellipse that has wrapping applied, (wrap around object shape)

  and I required ger cause what im after.but I would also like to put a text in front of the object to wrap text.

  but as the text gets closer he disappears.i know its due to the object with wrap test applied to it.so is there a way to bypass

  This question?

  PS: the object has fringes also applied to the it.i tried to write the text in photoshop and then import into indesign.

  in order to avoid dressing mop up the text.

  

  While the frame is selected, go to object > Options to block of text (CTRL B (or CMD B on Mac))

  This will display the field Options.

  There is a checkbox for "ignore text dressed '.

• How to change the text design AS3 using the class Date

  Hi I tried to create a 24-hour countdown on 24 who will make a loop and play back counting it self down to 00:00:00:00

  Thanks to Andrei1 for providing me with this code to create the next animtion:

  var result: String = "";
  var date: Date = new Date (null, null, null, 0, 0, 0, 24);

  var timeDisplay:TextField = new TextField();
  timeDisplay.autoSize = TextFieldAutoSize.LEFT;
  timeDisplay.multiline = timeDisplay.wordWrap = false;
  timeDisplay.border = true;
  timeDisplay.x = timeDisplay.y = 20;
  timeDisplay.text = "00:00:00 ';

  addChild (timeDisplay);

  var: timer = new Timer (250);
  timer.addEventListener (TimerEvent.TIMER, count);
  Timer.Start ();

  function countDown(e:TimerEvent):void {}
  Date = new Date (date.setTime (date.getTime () - timer.delay));
  result = date.toTimeString () replace (/ \s+GMT\-\d + /, "");
  timeDisplay.text = result;
  }

  The end result, I'm looking for is to display this countdown clock in a clear gray arial font as shown in the picture below link:

  http://img801.imageshack.us/img801/3604/picture1ms.PNG

  Right now the code I received leaves me with a box around the type and a GMT (+ 000):

  http://img534.imageshack.us/img534/4264/picture2ot.PNG

  I was wandering if any body knows how to change the design of something in the photo above simular.

  Thank you for your help in advance.

  Tom

  Snippets of code is one thing, but nothing is gained back together solutions to people without explanation (but maybe a smile to not have to struggle with it).  Learning is not easy and it is better that it isn't... it involves the effort, stadiums, an increase in capacity to win.  You presented an entirely different approach to a solution that involves techniques beyond a beginning level.

  Don't you think that tom understands what he has in his hands?  It can develop its own regular expressions or manipulate a Date object to what you gave to him?  More importantly, since he never solved the intitial design of yesterdays issues poster, which has involved basic concepts much more, don't you think he could solve this design now?  Or he missed on some basic things that must precede the techniques that you have provided learning?

• Text backup question / deleted

  I accidentally deleted one of my iPhone SMS 6 Plus.  They always show on my iMac and iPad but I fear when an AutoSave occurs, it will back up the iPhone and remove them to two other devices. What will happen?  I use iCloud if that makes a difference.

  Hi melissahh625,

  I understand that you have questions about your messages deleted on different devices. I know that it is important to have a handle on your data, so I'm happy to help you.

  When you receive messages, they are stored on different devices. This means that when you delete a device they will not be deleted on the other. This is the case, even if one of your backup devices to iCloud that these backups are specific to devices, as well.

  Thank you for using communities Support from Apple. See you soon!

• XControl - Ring Unicode text: some questions...

  This is my first 'real' XControl and I have a few questions.

  Open "Hand Test.vi" and run the VI.

  

  Question 1: The value of my XControl is always 65535 (U16), and in this case, it is supposed to be between 0 and 3 (four elements).  What I am doing wrong?

  

  Question 2: Why when I drop a new XControl on the façade, the size is larger than it should be?

  

  Question 3: Do you have any suggestions to improve this XControl?

  Jean-Marc,

  I've updated your code appears to solve the problems.  I was not looking for everything, so don't know if my 'patches' broken something you already set.

  Basically, I did the following:

  1. Changed control of the string to fit the pane
  2. Change event instead of use the Vi reference in your view state, I used the cluster contatiner control reference.
  3. Change your Vi resized to the size of container XControl on the size of the string.  This may need to play with a few pixels incase the borders cause a few problems.  At first glance, it's OK.

  See attachment.

  Matthew

• Blackberry design question

  Hi all

  I developed Blackberry application development using native blackberry.  In what I have to add several resolution devices supported.  In the design point of view I fill and margins to the fields in my screen. So I think that's not good programming.

  Please someone tell me any way to write code in blackberry supports all resolutions (i.e. jre 6 and 7).

  After going through many links I got information about LWUIT components. So please someone tell me what is the best use of coding or LWUIT native blackberry to blackberry.

  Thanks in advance

  Simon suggested, I wrote some of my thoughts as part of a number of tutorials, see here:

  http://supportforums.BlackBerry.com/T5/Java-development/tutorials-for-new-developers-part-1/m-p/1621...

  I think the user interface of one is 10 tutorial.

  As Simon said, the thing with the user interface is either:

  (a) the creation of a specific Interface for the form factor, you post (so it comes to take into account the size of the screen (pixels), resolution (DPI) and orientation)

  (b) creating a General UI that is appropriate at run time to match the form factor.

  For most applications where you don't need pixel perfect poster, I think that (b) works very well, there are a variety of approaches you can use.  Take a look at this tutorial.

  For example, Simon chooses the UI (such as icons) in assets based on the screen resolution, so choose icons of different size according to the screen (Android does something similar, and you can do this same sort of thing in BB10).  Otherwise, I'm trying to understand the bigger picture in construction and he adapts the device.  My experience is that the scale on the device works OK, but I suspect that some will say an image of 96 x 96 pixels scaled down the device to 64 x 64 pixels could not look as good as the image 64 x 64 prepackaged, try and see.

• Nexus 5600 HSRP design question for VLAN stretched between 2 areas of vPc.

  To our new data center network, I have 4 5672UP Nexus in two data centers. Between data centers is a redundant vPc with fiber 2x10Gb. I have configured two areas VPC, one for each data center. I read that HSRP within a VPC domain is active/inactive, but I wonder what would be the right way to configure the HSRP configuration for the VLAN tense because they are two areas different vPc?

  datacenter_example.PNG

  

  If you need isolation of FHRP between sites, this can be achieved by configuring the HSRP authentication in the same place so stop the HSRP Hellos between the treatment sites and allow each site to act in active / standby. Due to the HW on the 5600 Nexus architecture, control plane packets multicast are punted to the CPU, ignoring any PACL or MAC - ACL. So with a PACKAGE, you will not be able to filter the Hellos HSRP, ARP, BPDU, etc. that need to go to the CPU, because there is an ACL predefined to redirect traffic to control CPU and this ACL that overrides the ACL configured by the user. It is advisable to set up "no arp ip free hsrp duplicate" to repress unnecessary GARPs at each location in this design as well. Note 4-way HSRP is supported only on the latest versions of NX - OS, see also CSCuy89705.

  Another solution is to run FabricPath DCI with Anycast HSRP, which will allow all the 5600 to act as an active gateway by default, refer to page 22 of the FabricPath Cisco best practices.

  -Jeffords Tyler

• Sip Trunk design question

  Hello

  I have a requirement to pass an h323 to SIP environment environment. I'm looking for good practices, especially around security. I have 2 servers CUCM (8.5) in cities separated for redundancy. I have also 2 voice gateways which, at the present time, h323 to the PSTN, are each located in different cities.

  My requirements are:

  1. create a sip trunk instead of the supplier of the use of PRI.

  2 If the Wan link fails on a gateway provider, router replacing in the other location should be able to receive installation messages and if a user connects via extension mobility, should be able to answer the call.

  Is there a simplified design docos on for this? I hesitate to create a SIP trunk directly to the supplier for safety, thus thinking to end the call on the routers of voice with the CUBE. I am sure that it is managed from the factory and would appreciate comments.

  See you soon!

  Pieter

  Simple answer use ALWAYS the CUBE.  With IOS 15.1 T and more you have security against fraud free of charge that you can use to restrict which can address IP contacted the CUBE, that's all you need.

  HTH,

  Chris

• Design question

  http://S21.postimg.org/iml1shtiv/homepage.PNG

  I want to have this page on top... How can I bold part have an orange background as pictured above? take all the width... and in the middle of this text?

  /*
   * Copyright (c) 2011-2013 BlackBerry Limited.
   *
   * Licensed under the Apache License, Version 2.0 (the "License");
   * you may not use this file except in compliance with the License.
   * You may obtain a copy of the License at
   *
   * http://www.apache.org/licenses/LICENSE-2.0
   *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
   */
  
  import bb.cascades 1.2
  
  Page {
      Container {
          Container {
              horizontalAlignment: HorizontalAlignment.Center
  
              layout: StackLayout {
                  orientation: LayoutOrientation.LeftToRight
  
              }
          Label {
              // Localized text with the dynamic translation and locale updates support
              text: qsTr("Alkhaliji")
              textStyle.base: SystemDefaults.TextStyles.TitleText
              textStyle.color: Color.create("#fffffcf6")
  
          }
          ImageView {
              imageSource: "asset:///images/icon.png"
          }
          Label {
              // Localized text with the dynamic translation and locale updates support
              text: qsTr("Bank")
              textStyle.base: SystemDefaults.TextStyles.TitleText
              textStyle.color: Color.create("#fffffcf6")
  
          }
      }
  
      Label {
          // Localized text with the dynamic translation and locale updates support
          text: qsTr("Next Generation Banking")
          textStyle.base: SystemDefaults.TextStyles.TitleText
          textStyle.color: Color.create("#fffffcf6")
      }
      TextField {
          hintText: "Username"
  
          inputMode: TextFieldInputMode.Text
          }
      TextField {
          hintText: "Password"
  
          inputMode: TextFieldInputMode.Password
      }
      }
  }
  

  Please use my code in the other thread about it.

  http://supportforums.BlackBerry.com/T5/native-development/text-in-middle-of-container/TD-p/2688957

• Double firewall, config VPN design question?

  All,

  I'm looking to implement a design of double firewall with different suppliers, i.e. Cisco at the front and another seller behind that. The Cisco ASA will manage the ends of the VPN. It's a design recommended to us.

  The reason was the front towards the firewall (cisco) will block most of the noise, and then the second firwall will make inspection of the IPS etc. Apparently, this is also done incase there are vulnerabilities with the first provider. The DMZ interface will in fact come the second firewall.

  I am currently working, what if all remote users terminate their VPN at the edge of the ASAs, what is the best way have to move towards the second firwall, then again on the internet so we can apply the policy to users / and inspection?

  There are no facilities on the front to ASAs IPS inspection, just a bog without visibility L7 stock Firewall (as this responsibility will lie with the second firewall).

  Looking for information so that I can start looking...

  The MCV is a great place to start.

  http://www.Cisco.com/en/us/solutions/ns340/ns414/ns742/ns1128/landing_iEdge.html