text in adressbar and searchbar autoselecting fails or happens when I press bacspace

Similar Questions

• HP EliteBook 8560p: can not turn on WiFi: the button is orange, and nothing happens when you press

  Hello

  I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.

  The laptop is a little new: I use only 2 months.

  1. number and product name

  HP EliteBook 8560p
  НР LQ589AW

  2 operating system installed (if applicable)

  Windows 7 Professional 64 bit

  3. error message (if any)

  No error message

  4. all changes made to your system until the problem occurred

  My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.

  Additional details:

  In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.

  I already tried things:

  1. Reinstalled all the HP drivers from original CD.
  2. Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
  3. Checked the mobility Center as suggested in one of the threads available on this forum;
  4. Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).

  Thanks for any help!

  Anatoliy.

  I managed to solve the problem...

  Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.

  I hope this helps.

• HP g7-1320dx - on the numeric keypad does not work and the Num Lock will beep when you press

  Today, I noticed that my keypad does not work. The keys / *-+ and 'Enter' works, but the actual number will not.

  When I press NUM LOCK, it only beeps and turns the light active or not. And the keys / *-+ and 'Enter' won't work, any more than the actual digital keys.

  The regular keyboard numbers and keys all work, it is a simple matter of numeric keypad.

  Any ideas?

  So I thought that my own problem.

  "I went to the "Ease of access" >"mouse settings"> "paved digital use to move the mouse on the screen" and it has disabled."

  I hope it helps someone else in the future!

• It seems to be a problem with javascript on youtube (and other sites), because nothing happens when I click on my user name "tab" next to logout, when a menu needs to expand. I have unintalled FF, addons reinstalled, removed and checked the settings. Work

  Also on youtube, there is a problem with the bar of "James Blunt, live from London ' at the top of the page does not disappear when I click on the X.

  Check the dom.storage.enabled pref on the subject: config page and make sure that the pref is set to true.

  • http://KB.mozillazine.org/DOM.storage.enabled

• Wired Keyboard 600 with slow and some keys do not work when I press them.

  I have a microsoft 600 wired keyboard - he constantly young: types, I paid for the download of the driver as I thought that may be the problem, all the drivers are updated, but still get the missing and also slow to react on the keyboard, I think scrolling is very hit and Miss ideas

  Original title: keyboard continually for young

  Hello

  Did you of recent changes to the computer?

  I suggest to follow the steps mentioned in the article.

  Troubleshooting: keyboards

  http://www.Microsoft.com/hardware/en-CA/help/support/troubleshooting/keyboard/common-issues

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• When I move my cursor on the screen, it will highlight all of the text that affects the cursor. It also happens when I read my email. I don't hold down any other key touhing anything else.

  I use Windows 7 and office.  MY email account is through yahoo att.net

  Could be a hardware problem with your mouse or touchpad.

  If you are using a mouse, have you tried to plug in a different mouse?

  If you use a Tablet, have you tried to use a mouse?

• I'm trying to set up the synchronization... pair a device and menu on home computer says sync now, but nothing happens when I press it. I have not yet entered code

  Cannot set synchronization because when I try to enter the code on the main computer to pair a device menu firefox Sync now displays but nothing happens when I click on this

  Maybe the button is hidden somewhere, please create a screenshot of the problem you see by following the guide mentioned in the How to make a screenshot of my problem?.

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . You really help us to visualize the problem.

• Audio jack play and pause/stop when you press the various buttons

  Hi all

  I do a simple radio interface and I have 6 buttons which I want to have that specific preset song playing of the button located in the library screening and stop/pause the current song when you press any preset button.

  I tried to use the attachSound, with associated identifiers but don't know if it's the right way to go. He plays songs, but does not stop their...

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
  
  PlayFM1_1 = new Sound (this);
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
  
  }
  }

  
  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
  
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
  
  }
  }

  then I tried just to put each piece in its own clip and using this code, but it still doesn't stop/pause the song.

  Stop();

  {mc_preset1.onRelease = Function ()}
  mc_song1. Play();
  mc_song2. Stop();
  }

  
  {mc_preset2.onRelease = Function ()}
  mc_song2. Play();
  mc_song1. Stop (1);
  }

  Does anyone have any suggestions? Any help would be great! Thank you!!!

  Basically, I just need to know how to do the supported mc or button to STOP / to PAUSE the song that plays

  Thank you!!!

  -PAt

  the sound class has no property of break.  It has a stop() method, you must use:

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
         
  PlayFM1_1 = new Sound (this);

  
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
         
  PlayFM1_6.stop ();
  PlayFM1_5.stop ();  etc.
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
         
  }
  }

  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
         
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
         
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
         
  }
  }

• I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  Try a reset...

  Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings

• Transfer of text for Mac and Deleting Messages on iPhone

  with transmission of text is enabled and send it to my Mac, if I put Messages keep in 30 days, it also suppresses messages on the Mac?

  She removes it only from the iPhone - the parameter is not transferred to the Mac

• Why do I get texts into pieces and in the mess of others?

  Why my iPhone OS 6 more 9.2.1 receive texts into pieces and out of use?  Of it only happens with only the texts of some people, not everyone else.

  If it's TEXT and not iMessage (green bubble) then it is a function of carrier. Different companies have their "gateways" configured differently and so long texts can sometimes be break. Are the cases where this happens - individuals with one carrier other than yours?

• I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  What iOS version you are running. I've heard of it, but I heard no talk for a long time... You can update to iOS.

• HP250 G1: slow network,... and more often fails

  OK,... it's the daughter, my cell phone... and it has been dragging for many months as its network performance sucks!... When I try... It seems to work correctly.

  However... I've started using it myself to Antoinette this weekend, and yes she is right it sucks... Sorry (Dear daugther).

  I did in so many of the modules are up-to-date, including the BIOS,... but all update is a problem "chicken and egg", as the network fails usually... I managed to get win 8.1 and recently updated in a large download loading to another portable PC, transfer of pen USB... and the loading on the spot... all seem to date, network... drivers and the problem is present on cable and wired and wireless connections.

  I'm not absolutely sure... (and I'm more than happy to be corrected,.) . but the problem seems almost be associated DNS... failure to access the web site... I can ping my local router... and even ping to an external address from across the globe and get an answer in less than 50 ms... While access to ebay.co.uk or BBC fails and times out...

  I disabled the LAN IPv6 implementation... Although when I loaded the new BIOS... I don't no the default BIOS... Should I do this or is it done by default...

  I tried a reset DNS... This improvement in things temporarily, but response timeout and sligish is back... the command I used was

  > netsh winsock reset

  Someone at - it patch long term...

  What happens when you connect to one another source other than your router wifi?

  Have you tried to use different DNS servers in the router?  Google or OpenDNS maybe?

  WyreNut

• WMP11 download vs.non work wmp12 and got 'Operation failed with 0x8007047F.

  Tried to download wmp11 to replace my job no wmp12 and got ' operation failed with the specified 0x8007047F is not a Windows or MS-DOS program. "I got the download from the microsoft download site.  What now?

  Hi Hett_L,

  What operating system is installed on your computer?

  If you have windows 7 installed, it is not possible to uninstall Windows Media Player 12. Windows Media Player 12 comes preinstalled with the operating system. You can not downgrade to Windows Media Player 11 in Windows 7.

  Please post back and we do know.

• Mouse, fingerprint and photo scanner fail after updating to the latest version of Windows 7

  Since the last update of Windows 7, my wireless mouse, fingerprint reader and webcam all failed to exploit.  Please advise?

  Hi Divya R,.

  Thank you for taking the time to answer.  In Device Manager, there's 3 USB without name of devices that contained errors.  Even uninstall and restart did not resolve errors.  As the fingerprint reader and camera are built into the laptop, there is no option "Reinstall" and Sony eSupport was just shocking!

  So after some reading on various forums where a lot of people report the same problems with Windows 7 auto was last updated, I stumbled upon a solution:

  SOLUTION:

  1 uninstall USB devices without a name with errors.

  2. shut down Windows.

  3 unplug the laptop and remove the battery of the laptop for a few minutes

  4. replace the battery and restart Windows

  5 USB devices reinstall themselves and fix of a problem!

  Can someone at Microsoft tell me why it works?

  Other than this little glitch, I'm very happy with Windows 7.  Thank you very much!