Text of nervousness of tracking

Similar Questions

• How can I remove the underline of the text added to the track changes

  We have a lot of content which includes underscores and when we use the added track text edit function text is green and underlined. How can I change the properties of the text added to be not underlined?

  From FM11, you can specify a custom color to use for the track changes, but styles (underline, strikethrough) are still wired.

  Even if you try to make changes to the text edit rack conditions in a MIF file, they will be crushed as the MIF is interpreted then opened by FM.

  Please use the new form of Bugs & features submit an enhancement request: https://bugbase.adobe.com/index.cfm

• Help minimize the ripple on the text caused by the tracking camera

  Hey everybody,

  I have a camera to a null object, and I move the position of the null thus object, it seems to be hovering over the text I have (the text is a 3-d object).  I applied the presets for the text (for example, the rough edges) for him give a more distressed watched, and I also have it textured with a JPEG file.  Object null position changes, the effect of sand the edges like "ripple" and the Texture layer moves as well (i.e. it is not fixed with the text).  Is it possible to reduce this caused ripple so that the text does not resemble a kind of animated life form?

  Thank you!!

  Roughen the works of edges on the chassis of the comp not the limits of the layer so if you move the layer edges scratching will move. My first suggestion would be to compose text with edges to scratch, then parent the pre-comp to null beforehand and does not condense the transformations. In this way, everything remains editable and your rough edges will not change as the layer moves. BTW, the text layer doesn't have to remain 3D. If you keep 3D and condense the transformations, you will have the same problem with edges to scratch.

• Copy block of pasted text split over different video tracks remain linked

  I tried to find a way to fade and fade out text and came up with the following solution:

  It works:

  --Commencer start with an empty project, add a video clip (video 1 track)

  -Add a block of text by default to the video 2 track, accept the text by default, simply apply FadeInByLine animation

  -Add a block of text by default to the video 3 track, accept the text by default, simply apply the animation FadeOutByLine

  -Re-position the block of text to the video 3 track so he starts where the block of text in video track 2 ends

  Play your movie, the text fades in and out as it should. So, what happens if you do not want to have the text in the Center and you want it to have a different color or font, or style?

  Try this and this is where things get weird:

  --Commencer start with an empty project, add a video clip (video 1 track)

  -Add a block of text by default to the video 2 track and change the font color, also reposition the text somewhere on the lower left corner of the screen, then apply the animation FadeInByLine

  -Now, you don't want to repeat throughout all these stages of formatting, so duplicate the text block by copy paste (it will be pasted on the same track, both video 2 track)

  -Now drag the duplicated text frame the video 2 track to the video 3 track

  -Re-position the block of text to the video 3 track so he starts where the block of text in video track 2 ends

  -Apply the FadeOutByLine animation on the block of text on the video track 3

  Read your movie and you'll see that two blocks of text are the FadeOutByLine animation. If you change the animation of a block style, the same style will apply to the other block. They are still linked to the each other.

  Suggestions anyone?

  janionder

  For now I guess you have to first items 11, 12 or 13 on Windows 7, 8 or 8.1 64bits.

  You forgot a fundamental principle of the titration module. You cannot copy a title, change the copy without your changes to the copy in the original title.

  What you need to do, this is the original in the assets of the project right click and select duplicate. Duplicate will have a different name from the original... Drag the duplicate to the timeline

  and make your changes without simultaneously changing the text in the original to match your changes in the copy.

  Why you not only add a Fade In and Fade Out for the title, rather than text animators applying the way you have?

  With the closed titration module, right-click on the title on the timeline, select melted, then fade in video. Then, right click the title again, this time in video output.

  You will notice that the clip of two sets of white dots on the orange band that goes by the title, a set at the beginning of the title, and another series at the end of the title. Them are opacity keyframes. You can adjust these 'points' with the mouse cursor to customize your fades.

  If you do not use the double active project to avoid the titles of all ending up with the same changes, then just rename a title in the active project.

  Please consult the bulletin and review, and then let us know if none of this works for you. For any question or need for clarification, please let me know.

  Thank you.

  RTA

• Text animation

  Hello guys.

  So there is this idea of mine, where I would like to create the following text animation:

  White text, then something like a knife cut on this text (in the middle of the text, but the line is not horizontal right, rather a bit diagonal) as well as the cutting line, the red color appears (imitation of blood), then this line of cut red color begins to slow down (and only the letters cover letters (, no backing at this stage), after the 'blood' starts any kind of letters.

  I already know how to do the easy part, which is the last
  I used to liquefy, and the result is great.

  How to get all the effects before that?

  Is this possible in After Effects?

  I use AE CC and Win7.

  You start thinking in childbirth, learn more about the masking, follow masks mattes and don't be afraid to duplicate layers. Here is one approach.

  1. Create your text layer
  2. Add a mask for the text layer to give you the path of the knife
  3. Set a keyframe for the mask path and copy
  4. Add an image of a knife to the timeline
  5. Set a key position for the knife and stick.
  6. The knife now follows the same path you drew with the open mask
  7. Return the text layer and reproduce twice
  8. Change the mask on the first page of the text layer and close if you only see the top half of the text layer
  9. Add a solid white to the model and place it on the bottom layer
  10. The value of the basic copy of the text layer as a track matte for the blood spatter
  11. Animate the position of blood spatter layer so that it corresponds to the cutting knife
  12. Add another layer down to create the animation of blood dripping

  When you are finished, you might want to add the bevel Alpha to give blood some brightness and surface tension. It depends on your design.

  Here's what's happening. The first folio of half of your text layer mask layer of blood. The second copy of the text provides a matte for the layer of blood. The copy of the text layer base gives your text the same color as the first sheet so that the layer of animated blood covers it.

  This is only one of the two ways of tens to the effect. Launch text animations to make the bottom half of the separate letters because they are cut off would be a nice addition.

• Problems placing the image in underlined text

  Hi all

  I am trying to place an image in a text described in ID CC, but it will only put in one line, instead of the whole lot. for example. my text reads as follows:

  STUDENT
  PRICE

  2014

  but I can't just put the image in one line at a time, for example. "STUDENT".

  I also tried to copy the picture and paste it in, but once it only let me do this for a single line of text.

  Does anyone have any ideas why this is happening?

  Thank you very much!

  Select all of your highlighted text and choose object > tracks > make a compound path...

  Now try to place the image.

• How to hide text through layers of an image to the background layer?

  I have several layers of text I want to hide a background layer, which is a moving image.

  Text layers are displayed in chronological order to make a sentence (and I need it on several layers of positioning). The first word mask works great, but none of the other texts/masks until the end showing that they are on the lower layers and are hidden

  I also want the hidden area to be black.

  I have enclose a picture that shows what I want, but imagine every word is on a different layer, appear in the order and are surrounded black.

  

  Thank you!

  Text animations to reveal your text. Use the text layer as a track for the video cache. All that is required is two layers.

  If you insist to have each word on a separate layer, you need to precompose your layers of animated text, and then use the demo as a matte alpha for your video.

  Here are the basics of EI.

• text of mask?

  I have the text that I live tracks and I try to mask through the letters vertical lines. When I do this the text turns white. When I unlink and do one at the time that a letter works others turn white. When I use the brand will work a letter always that a single compound path and the other letters become white.

  Please help, I just buy CS6 and I don't have time to do tutorials and I have a deadline to meet...

  Thank you

  T

  The letter forms are probably grouped

  1 unlink them, you may have ti use the command dissociate more than once or twice.

  2. when all the letters are always selected are art text a path is dedicated to the (even if the option to release a path is dedicated to the is present).

  3. make sure that the letters are in police lines

  4 Select and do your clipping mask

• How to get the Horizontal Slider that aligned with the text?

  Hello

  I'm putting my horizontal sliders according to textual information, but for some reason that the alignmentbase property does not work. Any tips?

  The code that I use now:

  < s:Panel id = "ViewTracksPanel".

  title = "look a parameters.

  Width = '100% '.

  Height = "100%" >

  < s:layout >

  < s:VerticalLayout paddingLeft = paddingTop = "10" "10" paddingBottom = "10" / >

  < / s:layout >

  < s:VGroup >

  < s:HGroup gap = "30" >

  < s:RadioButton group = "{viewingtype}" id = "viewtrackHistory" label = 'History of Athletics' value = 'History' / >

  < s:RadioButton group = "{viewingtype}" id = "viewLatestLocation" label = "Current Position" value = "LatestLocation" / > <! - does not work because the accuracy of the data is not in line with precision of interval - >

  < / s:HGroup >

  < right s:HGroup = "40" >

  < mx:Text text = "track time interval: Minutes of {timeInt.value}" / > ""

  < s:Label text = "1" / >

  < stepSize minimum = "1" maximum = "1" s:HSlider = "60" id = "timeInt" width = "200" dataTipPrecision = '0' change = "timeInt_changeHandler (event)" alignmentBaseline = "ideographicBottom" / > "

  < s:Label text = "60" / >

  < s:Label / >

  < / s:HGroup >

  < s:HGroup >

  < mx:Text text = "display time interval: seconds {Speed.value}" / >

  < s:Label text = "1" / >

  < s:HGroup >

  < stepSize minimum = "1" maximum = "1" s:HSlider = "5" id = "Speed" width = "200" dataTipPrecision = '0' alignmentBaseline = "ideographicBottom"/ >

  < / s:HGroup >

  < s:Label text = "5" / >

  < / s:HGroup >

  < s:Label / >

  This translates into:

  

  As noted above, the cursor (& corresponding labels) aren't on the same 'line horizontal/position' as the mx Text (e.g. "Track time interval" but a little higher?

  I tried to put alignmentbaseline to all possible values but whithout success.

  Any advice would be great!

  Thank you.

  Maybe put the two HGroup form and form elements will have a height and can use verticalAlign set to medium or low, depending on what works.

• UTL_FILE. PUT_LINE

  friends, I have the following problem, I use this command UTL_FILE. Put_line but who puts the data in a file and makes it perfect, everytime you complete a line jump down I can do to make the next line is Pan below?

  UTL_FILE. Put_line-online text written in a tracking file to an end of line marker

  UTL_FILE. PUT-online text written in a file

  You probably want the latter.

• show/hide a field (table) by using a button.

  I have a table set to hidden and want to display it using a button and hide it using the same key. If the table is not visible I don't want to be printe. Any suggestions?

  Thank you

  -Very well, it looks that it does not keep the flow of the form...

  Another work around you can use this work for you would be the following:

  1. keep this code in the button click event

  If (Table1.presence == 'hidden') {}

  Table1.presence = "visible";

  } else {}

  Table1.presence = 'hidden ';

  }

  2. in your hierarchy, click the table that you want to hide when printing, go to the case of pre-printing and put this line (prePrint is before printing)

  This.Presence = 'hidden ';

  3. now, in the event of postPrint, you can put the following line to replace the visible table (postPrint is after printing)

  This.Presence = "visible";

  Do not forget that if the Table is hidden when printing, the table appears in the postPrint.

  So if you want to avoid this problem, you can have a hidden text field that keeps track of how you should view the table after printing.

  If you do this, you can change the 'visible' to TextField1.rawValue value

  You can put the value of the text using the click event of the button field, when changing the value of the presence of the table changes the value of the text and field

  I hope this will help you!

• Indeed police video

  Hello. How can I get video effect in the police as here: http://www.youtube.com/watch?v=jR2BYIfjiqk ?

  Alternatively, you can simply set the text layer as a Track matte for the video layer.

• Follow the colors of changes does not when the story contains table

  Can anyone reproduce this problem/bug, or let me know if it's just my machine?

  Steps to reproduce

  1. Make sure that your Edit > Preferences > story editor a non-black text colors defined for the text added, deletedand moved text.
  2. Create the document and draw a text box
  3. Inside the text box, right click > fill with placeholder text
  4. With the cursor in the text box, turn on track changes and changes to show the range of track changes :
     
  5. Open the story editor with Ctrl/Cmd-Y
  6. Cut and paste, delete and insert a text.
  7. Confirm the colors appear in story editor as defined in step 1:
     
  8. Now insert a table anywhere in the history. For me, all (bg fine rest) non-black text coloring disappears:
     

  Is this a bug in InDesign, or do something that I experience on my own machine? I was able to reproduce the issue in InDesign CS6, CC InDesign and InCopy CC on my Win7 Pro 64-bit machine.

  I would recommend the filing of a bug here report to ensure it is reported:

  Adobe - feature request/Bug Report Form

• Need a little help with a code

  Hello adobe community!

  I've been fiddling around with FLASH MX and made a game VERY slowly.

  I picked up a lot since the beginning and you have restarted the game MUCH MUCH time = D...

  But I have now a copy which is neat and clean and works great BUT I came in a bit of a problem.

  I have _global.goldenticket = 0;   on my first image as well as other variables and I had one place where we can acquire a "goldenticket.

  now, things are starting to confuse me... ive added a button inside a clip which, if you click on 'must' check if I have a golden ticket and then let me go to the specified image...

  {We (Release)}

  {if(goldenticket=="1")}

  money-= 50;

  Energy-= 50;

  _root.gotoAndPlay ("enter");

  } else {}

  This.Enabled = False;

  }

  }

  However the button doesn't seem to see my ticket (even tho Ive added a dynamic text box to keep track of how I, 1)

  Ive tried different ways to get around this, but I can't make it work...

  Please someone help me... relatively simple answers please =------im only a few days of learning flash and codeing. but im enjoying what im doing so im learn quickly.

  will have my face on the screen waiting = D

  Thanks to everyone who took a glance at my son!

  If it's a variable _global then send it as a...

  {if(_Global.goldenticket=="1")}

  Also, if it is a number you should not use quotation marks around it.

• Read the XMP Array (XMP:Seq) data

  Hi, I'm new in XMP. I after metadata (just after the binary data of video):

  [code]

  < xmpDM:videoFrameSize

  stDim:w = '640 '.

  stDim:h = "480".

  stDim: unit = "pixel" / >

  < xmpDM:startTimecode

  xmpDM:timeFormat = "30Timecode".

  xmpDM:timeValue = "00:00:00:00" / >

  < xmpDM:altTimecode

  xmpDM:timeValue = "00:00:00:00".

  xmpDM:timeFormat = "30Timecode" / >

  < xmpDM:duration

  xmpDM: value = "34688522".

  xmpDM:scale = "1/90000" / >

  < xmpDM:Tracks >

  RDF: < bag >

  < rdf:li >

  < RDF

  xmpDM:trackName = "text of a transcript".

  xmpDM:trackType = "speech".

  xmpDM:frameRate = "f30" >

  < xmpDM:markers >

  < RDF: SEQ >

  < rdf:li

  xmpDM:startTime = "115".

  xmpDM:duration = '5 '.

  xmpDM:name = "now".

  xmpDM:speaker = "LISA SIM"

  xmpDM:probability = "100" / >

  < rdf:li

  xmpDM:startTime = "120".

  xmpDM:duration = "6".

  xmpDM:name = "freu"

  xmpDM:speaker = "LISA SIM"

  xmpDM:probability = "100" / >

  < rdf:li

  xmpDM:startTime = "126".

  xmpDM:duration = '2 '.

  xmpDM:name = "ich."

  xmpDM:speaker = "LISA SIM"

  xmpDM:probability = "100" / >

  [/ code] (all the data are too because is a video file, so I cut off the most important part)

  I tried with the iterator. See the following C++ Code:

  [code]

  #include < iostream >

  #include < String >

  #define std::string TXMP_STRING_TYPE

  Include XMPFiles component of the XMP Toolkit

  #define XMP_INCLUDE_XMPFILES 1

  instantiate class XMP models

  #include "XMP.incl_cpp".

  include XMP API

  # include "XMP.hpp".

  using namespace std;

  int main (void)

  {

  initialize the XMP Toolkit

  If (!.) SXMPMeta::Initialize())

  Return 1;

  If (!.) SXMPFiles::Initialize())

  Return 1;

  XMP_OptionBits opts = kXMPFiles_OpenForRead | kXMPFiles_OpenUseSmartHandler;

  File SXMPFiles;

  String fileName = "Z:\\Entwicklung\\Untertitelung\\C input\\11_Gespraech_Monika_Tampe_untertitelt.mp4";

  String fileName = "Y:\\temp\\11_Gespraech_Monika_Tampe_untertitelt.mp4";

  cost < < 'Opening the file' < < file name < < «...» "< < endl;

  bool ok = file. OpenFile (fileName, kXMP_MPEG4File, opt);

  If (!) OK)

  {

  cost < < "no intelligent Manager available for ' < < fileName < < endl;

  cost < < "Trying package scan...". "< < endl;

  Now try to use the scan package

  OPTS = kXMPFiles_OpenForUpdate | kXMPFiles_OpenUsePacketScanning;

  OK = file. OpenFile (fileName, kXMP_MPEG4File, opt);

  }

  If (OK)

  {

  preparation of variables

  Meta SXMPMeta;

  "" "String schemaNS =" ", propPath =" ", propVal =" ";

  cost < < «Retrieval of metadata...» "< < endl;

  file. GetXMP(&meta);

  SXMPIterator iter (Department of meta, kXMP_NS_DM, "Tracks");

  While (ITER. Next (schemaNS, propPath & propVal))

  cost < < propPath < < '=' < < propVal < < endl;

  }

  on the other

  cost < < "Could not retrieve metadata!" < < endl;

  cost < < "finished \n=== =" < < endl;

  System ("pause");

  return 0;

  }

  [code]

  I get the following:

  [code]

  Open the Y:\temp\11_Gespraech_Monika_Tampe_untertitelt.mp4 file...

  Retrieving metadata...

  xmpDM:Tracks =

  xmpDM:Tracks [1] =.

  xmpDM:Tracks [1] / xmpDM:trackName = text transcription

  xmpDM:Tracks [1] / xmpDM:trackType = speech

  xmpDM:Tracks [1] / xmpDM:frameRate = f30

  xmpDM:Tracks [1] / xmpDM:markers =

  xmpDM:Tracks [1] / xmpDM:markers [1] =.

  xmpDM:Tracks [1] / xmpDM:markers [1] / xmpDM:startTime = 115

  xmpDM:Tracks [1] / xmpDM:markers [1] / xmpDM:duration = 5

  xmpDM:Tracks [1] / xmpDM:markers [1] / xmpDM:name = now

  xmpDM:Tracks [1] / xmpDM:markers [1] / xmpDM:speaker = LISA SIM

  xmpDM:Tracks [1] / xmpDM:markers [1] / xmpDM:probability = 100

  xmpDM:Tracks [1] / xmpDM:markers [2] =.

  xmpDM:Tracks [1] / xmpDM:markers [2] / xmpDM:startTime = 120

  xmpDM:Tracks [1] / xmpDM:markers [2] / xmpDM:duration = 6

  xmpDM:Tracks [1] / xmpDM:markers [2] / xmpDM:name = freu

  xmpDM:Tracks [1] / xmpDM:markers [2] / xmpDM:speaker = LISA SIM

  xmpDM:Tracks [1] / xmpDM:markers [2] / xmpDM:probability = 100

  xmpDM:Tracks [1] / xmpDM:markers [3] =.

  xmpDM:Tracks [1] / xmpDM:markers [3] / xmpDM:startTime = 126

  xmpDM:Tracks [1] / xmpDM:markers [3] / xmpDM:duration = 2

  xmpDM:Tracks [1] / xmpDM:markers [3] / xmpDM:name = ich

  xmpDM:Tracks [1] / xmpDM:markers [3] / xmpDM:speaker = LISA SIM

  xmpDM:Tracks [1] / xmpDM:markers [3] / xmpDM:probability = 100

  [code]

  So far so good. My colleagues told me that I could use XPath if I want to access the nodes of the markers. Then... How can I do this with C++?

  Floh Cu

  Well... I finally found API - Doc.

  The answer is for example:

  meta. GetProperty (kXMP_NS_DM, "xmpDM:Tracks [1] / xmpDM:markers [1] / xmpDM:startTime", & propVal, NULL "");

  Now I can build loop without using the iterator.

  Floh Cu