Text showing invalid

Similar Questions

• After, minutes, of, integration, sim, my, phone, shows, invalid, sim., why?

  After inserting the sim card it shows network and seems ok. but after awhile my iphone5 shows invalid sim. IM facing this problem for the last month and half. can anyone suggest me on this subject?

  It could be the current SIM card, or it could be the settings of operating system or to the carrier.

  Try going into settings > general > all. After a few seconds you will get a prompt to update if it is available.

  If there isn't, I'll try to do a backup and restore then the device in iTunes to install a new copy of the software, then set it up as a new phone for a day to test it.

  If after you restore the phone again to do, try to get a new SIM card from your operator.

  If it's still doing with a new SIM card, it is material to the phone and you should get it looked at.

• Texts show the number instead of name info.

  Texts show the phone number instead of name on my Apple Watch info.

  Hello

  On your iPhone, in the Contacts application: check that you have created a form of contact for the sender and that the map includes the sender name and phone number.

• BlackBerry Smartphones Blackberry phones showing invalid sim.

  Any ideas... phone showing "invalid sim" and so out of action... even at 3 phones different blackberry still ok when put on a blackberry not. Phone of her husband so no access to email, contacts, etc without sim works fine. Thanks in advance. Assuming that we need a supplier to replace the sim card?

  Hello! If the sim card is old, you might need replacement. A sim card error message that does not resolve with a soft or hard, starting usually indicates a problem with the SIM itself.  Do you know if the sim card is 32 k or 64 k? The only difference between the two (as far as I know), is that the 64 k can automatically detect the network stronger. If I were you, I had to contact my operator to replace the sim card.

• Text shows as truncated, that in Safari.

  I made a screenshot of two lines of text of description under two photo albums of Facebook. (Attached) This just started in the last 3-4 days and I have to open the page in Firefox or Chrome. Attached are their appearance. Strange thing is, this is just some lines. Others are perfect, on the same page where other Facebook albums appear in a grid of the photos section of the page.

  When I copy the lines blurred in text edit, they read very well. The two lines read:

  'Oil wax treated Pirate hats '.

  "Straw & Sea Grass Pirate hats.

  Latest version of Safari Version 9.1 (11601.5.17.1)

  on an iMac end of 2015

  Preferences show that the coding is the same "Western (ISO Latin 1)" he always used.

  

  Boot mode safe. https://support.Apple.com/kb/PH21875?locale=en_US

• PDF with Images - layers of white text showing on picture - how to remove?

  Hi all, I was sent a multi-page pdf. When I go online (in firefox or chrome), the pdf file seems perfect. When I print the pdf and then open the PDF on my system, it shows the pdf with white text on any word. I opened the PDF in illustrator and saw immediately that there is a layer of white text. If I delete the layer, everything looks ok.

  The layer of fonts on all pages are presented. They are not necessary, how do I remove the layer of outline fonts in acrobat? Its a huge file with many pages.

  So firstly I would like to know what has caused this? What is an accessibility issue forced? Second how to remove all text white file so that I can see actually correctly?

  Difficulty.

  Open pdf file and using preflight. Clicked on the key and sought to "create different layers for text vector image. Since there are no layers. It will ask you to save the pdf file. Save, then open the layers and uncheck vector layers. Return to the preflight and key key and double-click on the content of the layer lay hidden and flatten visible layers. It will ask you to register.

  New file will now appear not text. Acrobat documents it's terrible!

• Package body dropped, but showing invalid

  Nice day:

  Oracle 11 g 2

  I created a Package with Package bodies, procedures 3, which works very well.  I can call it without error.  However, if I run this query:

  SELECT *.

  From user_objects

  Situation WHERE = "INVALID."

  I get the following result:

  OBJECT_NAME

  SUBOBJECT_NAME

  OBJECT_ID

  DATA_OBJECT_ID

  OBJECT_TYPE

  CREATED

  LAST_DDL_TIME

  TIMESTAMP

  STATUS

  TEMPORARY

  GENERATED

  SECONDARY

  NAMESPACE

  EDITION_NAME

  TASK_PROCEDURES

  28700

  PACKAGE BODY

  5 July 14

  July 11, 14

  2014-07 - 11:18:42:39

  Not valid

  N

  N

  N

  2

  It is an old package body, that I dropped it about 4 days ago.  That is always supposed to show if I run this query?

  I work with Oracle SQL Developer, using almost the same version too. I don't think that it has nothing to do with the tool as the data dictionary shows this info too.

  Could you post the exact commands that you run from a sql more session? And the sql like too much output.

  Example (demo of pseudo code)

  SQL > alter the package xxx body compilation;

  SQL > compiled package.

  SQL > show errors

  SQL > no error

  SQL > drop package xxx;

  SQL > package abandoned;

  SQL > drop package body xxx.

  ???

  SQL > select xxx.someFunction from double;

  I could explain the behavior if you have enabled the editions (CDE). But there is no air if in your case.

  Just to be absolutely sure of it. Make the select statement and after the release:

  select object_name, object_type, namespace, edition_name
  from user_objects_ae
  where object_name = 'YOURPACKAGENAME';
  

• Has anyone seen this error of conditional text: show/hide is incompatible?

  When I generate my book file, I get the following error in the log:

  Show/hide hidden is incompatible.

  Does anyone have any suggestions on how to troubleshoot and resolve this problem?

  Thank you

  Janie Gulley

  FrameMaker assumes that when you export a book, you would like conditional text to shown the same way across all documents in the book. It warns you if it is not so.

  "Show/hide hidden is incompatible" means that the hidden state is not configured the same throughout your book. For example, it can be displayed in some documents but hidden in others, or an indicator of Condition red in some texts, but blue in others.

  To resolve this problem:

  1. Select a document in your book where the conditional text settings are correct and open.
  2. Click on the book and type Ctrl + A to select all the documents in it.
  3. Choose file > import > Formats. Import the Formats dialog box appears:
     1. Click deselect all.
     2. Check the conditional text settings .
     3. Click import.

  All the documents in your book have now the same conditional text as your chosen document settings.

• Photoshop CS6 - text showing above the text box

  Hey all,.

  I have a user who is currently using Photoshop CS6 on a Windows 7 Machine and when to manipulate a text box, he sees the text above where the actual text box. I tried to format the text in multiple fonts and sizes with the same result. I also created a new text box on a new layer with the same results.

  Any ideas on that? Is there an option im missing which could solve this problem?

  Thank you

  You can show us a screenshot please?

  What is your problem?

  

  

• Text showing fields not when formed open after masked

  I developed an interactive form that prompts the user to provide an explanation if certain boxes are checked. For example, if a user gets "A", a text box (which is by default hidden) appears asking the user to explain their problem with "A". When the form is saved and sent by electronic mail, 'A' is checked, but the text box is hiddden. The user is held to uncheck and then recheck the check box to display the text. I don't want hidden text boxes to display in the original form, since there is no reason to have dedicated the empty space if the user has no concern to describe.

  How hidden text fields can show a saved form which is now reopened? (I wrote the code that says "hidden if it is disabled but visible if enabled.") Since the box is checked when opened after a backup, it should open with the display of text field.)

  Thanks in advance!

  Or... are a quick glance at the form of file/properties/Defaultsand make sure you that the button that sets the 'preserve Scripting of form when save changes' is set on automatically.

  Paul

• Can I export only conditional text 'show' for a mif?

  When I export a document with conditional text to a pdf file, just the conditional text which has the value 'show' (and the unconditional text) appears in the pdf file.  It's good, but I want the same thing when you export a mif.  There are two reasons for this:

  (1) we have an internal tool that analyzes a mif and retrieves the data in some tables to fill a database.  The tool is not analyze PDF files.  And the tool does not always correctly, manage conditional text lines conditional in particular the table text.  The tool will work fine if the conditional text was already "solved" when exporting to the mif.

  (2) I would use the Boolean logic for conditional text, which is available in FM9 but I need to supply files to other groups in society who use FM7.  Their FM7 wouldn't show conditional text correctly if it depends on nothing else than to the logic of the GOLD.  But they would be happy to accept files mif which had no conditional text because it had been "resolved" when I generated a file mif7 for them.

  I tried different ways to convert a pdf into a mif file, but no process seems to preserve the formatting and text editable. I'd be ready to accomplish this somehow roundabout on Framemaker, Acrobat Pro or another tool.

  But the happiest result for me would be to discover that FM9 already has the ability to export only the conditional 'show' and the text unconditionally to a mif.

  Or is it possible to make a copy of the document and then somehow automate the removal of conditional text 'hide' and 'show' unconditional conditional text conversion?

  doc_engineer,

  You could manually delete the conditions hidden from the files before the Save as MIF, by choosing the option remove all text hidden as well. If you want to completely automated, however, you need to perform some shows, in which case I would recommend setting your post-processing tool in order to recognize the conditional text correctly, rather than make FM do something which is less-than-optimal, IMHO.

  Your best bet of all would be to abandon the MIF format altogether and use a structured XML author, with which you can use for the conditional metadata attribute values. With this, you could also abandon the model of FrameMaker condition for a much more robust system of conditionalizing content tag. It would be more flexible and certainly easier to design the post-processing step, as there are many tools available for the treatment of XML metadata and the ability to analyze the attribute values is commonplace among them.

  Russ

• The text showed in an af:inputFile can be deleted?

  Hi all
  
  I use ADF Faces and Jdeveloper 11 GR 2
  
  Anyone know if we can't show the "{" (claudators) and the name of the file to download, which appear in the inputFile?
  The goal is only show button, without the label and text incorporated.
  
  I tried some things using CSS, but nothing... and I think that this option is not available in the properties of the component
  
  Thank you
  Xavi.

  Hello

  the text input field must be empty if there is no assigned value and show the name of the file if selected. There is no way to show just the button

  Frank

• Web page text shows gross briefly before applying css implementation in shape

  Suddenly, Firefox is display raw text of my main web page before it is applied to the css formatting. Without changes have been made to the code of the home page in several months. No other page on my site for this. It started to happen about a week ago. He can't go to any other browser.

  Perhaps caused by one of the JavaScripts that run on the page.
  
  I can't if I disable JavaScript.

• A text showing as AAAAA in boxes

  Why some text does not appear as ABDELKHALEK boxes separated on some Web sites.  For example a description of an item on Amazon is listed as ABDELKRIM but text is normal.

  Missing or damaged fonts.

  ~/Applications>Font Book > all fonts (highlite at least a fonts in the list, then order a will, select all fonts then) > file > make validates.

  
  

  With all the fonts selected (highlited) run vailidate fonts

• Digital fax put in place in the web server integrated shows "invalid entry".

  I have an officejet Pro 8600 more than we use fax digital network folder option with.  Our installation worked fine for several months and the other day I noticed that we receive no faxes in the network folder.  I go through the installer with the built-in web server, and when I save and test I get an error of "invalid entry".  Technical support has been absolutely no help.  Hoping that someone out there has an idea that might work.  To make matters worse, when I turn off the digital fax I get is even more print faxes.  They just disappear! Any help is appreciated.

  Hello

  In Internet Explorer, open the built-in web server, click the ALT key and then click on tools on the main menu.

  Click compatibility view settings, and then click the Add button.

  Click Close, and then follow the fax to electronic-mail/network folder option.

  You can see any difference?