text to Excel and insertion of graphics problem?

Similar Questions

• Windows 7 graphics problems

  I installed Windows 7 (twice now) and I have graphics problems.  It is the most widespread in Windows media Player and Mozilla Firefox.

  Here are some pictures:

  http://i254.Photobucket.com/albums/hh81/plasmaXwisp/errors.PNG

  http://i254.Photobucket.com/albums/hh81/plasmaXwisp/Erros2.PNG

  It seems that color just slide OFF... and I know that windows media player does not look like that!

  the only Web browser that is not affected by the present is chrome.  I knew another pile of graphic problems, including a very bright wallpaper, but that has inexplicably disappeared.  I'm sure that I've updated my graphics card drivers.  I tried to load games, and they work without any problem; the problem exists in these programs (that I know).  I'd appreciate any help.  Thank you

  Specifications of the computer:

  HP Artist Edition (this may contribute to the problem?) Laptop Pavilion Dv6

  AMD Turion X 2 ultra dual-core processor

  64-bit of the system ACPI

  ATI Radeon HD 3200 graphics card

  4 gigs o ' RAM

  any necessary additional card? Just ask.

  Hi PlasmaXwisp,

  Welcome to the Microsoft Answers site!

  It seems that you have installed a theme of others on your computer causing problems with these programs. You can uninstall the theme and
  check if it helps.

  Install third-party themes is not recommended by Microsoft.

  You can download Windows 7 from Microsoft themes from the link below:

  http://Windows.Microsoft.com/en-us/Windows/downloads/personalize

  You can also change the performance settings and check if it helps. Follow these steps:

  1. right click on computer and select Properties.

  2. click on Advanced system settings.

  3. now on the Advanced tab, click settings.

  4. Select the option 'Let Windows choose the best settings'.

  5. click on apply , and then click OK.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Excel & ActiveX: Insert arbitrary columns of 2D array and create problems of graph

  Hello

  I want to insert data in a 2D of LabView or 1 d table in Excel and create graphics.

  I used the information in the following example:

  http://www.NI.com/example/28934/en/

  and has managed to create a new Excel file (I use Excel 2010) writes data in a 1 d table to a column in excellent by creating a while loop and using the first element of the array to write in a specific cell. I use the loop counter to write to the next cell when the loop starts again and always remove the first value, I write to the cell of the table until it is empty.

  Now I also want to write a 2D - column in Excel table should be the first column of the matrix and so. Here, I can not use the loop counter directly as Excel there are only 1,2,... for the lines, but uses A, B,... to count columns. Also I do not know in advance the number of columns my 2D array will contain, thus creating a lookup table as (A means 1, 2 B, which means...) is not really an option (except there is really no other way). Is there a possibility to convert numbers into letters or somehow to "explain" to the program that this column 2 of the table means column B in Excel for example, or is it possible to insert new columns?

  I figured out how to add new calculation sheets and as I also need to create a certain number of spreadsheets and I know that the standards 3 sheets are present during the creation of the file, I use the method 'Add' to create new worksheets before the worksheet 3 - I could use the same method to create new columns in Excel , but so far I have not found a method to do. Or is there a way to enter into the 2D table all at once?

  So I want to create a chart (in case 1 d tables draw a bar when using 2D arrays a 3D field) to display the data. I found this example:

  http://www.NI.com/newsletter/51339/en/

  -> that I do not have the tool box I would do it directly using ActiveX, so I tried to make things as shown under the title "ActiveX DIY /.» NET'

  I tried to load the code snippet into a new Excel file but got the error message "microsoft.office.interop.excel.dll" not found and this is why the code does not work. Which confuses me a bit as I guess when this dll is not present I can not access Excel of LabView at all, although my understanding of what I'm doing so far is limited in the calm. ;-)

  Also - as far as I understand the extract - when you create a new graphic object, I should be able methods to create for her, however when I do a right click on the graphic object to a symbol of the spreadsheet ActiveX it no listed.

  To explain my problems better, I added an excerpt showing my two problems: the inside of the two loops while showing how to import a table 1 d. In the outer loop I separate the columns. I know that is not currently as has all the data in the column of the Excel sheet - so I need to convert the external meter number a, B,... or find another solution.

  In addition, on extract, I placed a property ActiveX spreadsheet with the Chart object - I can see that the difference to the graphics object of the example code of the last link above is the color. However I do not know what it means and how to change / fix this.

  And just to make sure - I know that this path that the VI is not running as the graphical object is placed completely false – I just did, so it is included in the extract.

  I would be grateful for any suggestion,

  Thank you!

  Hi all

  for your information in professional 2014 LabVIEW report generation toolkit is included

  Table 2D

  I want to write table 2D in specific columns/rows in excel

  Graph

  Create a graph through ActiveX Labview traced XY scatter on an excel sheet

  also good information about Excel and ActiveX

  Excel Council

  Hope that if aid, if not please let me know.

• I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  Try a reset...

  Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings

• Windows 7 Graphics problem: graphics would become all deformed and weird looking

  original title: graphic problem Windows 7

  Hi, I recently got a new laptop with Windows 7 pre-installed on it.  Sorry if this problem has already been asked before, but I couldn't find someone else with the same problem I have.

  Sometimes, the graphics would become all deformed and weird looking.  Look at the screenshot I took:

  

  And it occurs for each program, not only on the desktop.  I could usually get rid of the lines by reducing the window and maximizing it again.  But it's so boring.

  My graphics card is a Mobile Intel (r) 4 Series Express Chipset Family.  I updated the driver from last night, but the same thing happens again.  So I don't know what else could be the problem.

  Thanks in advance!

  Check if your video card has its own program/parameters adjustment control panel and use it to adjust your settings more towards the side of the 'quality' rather than the side 'Performance' and see if that smooth your edges for you.  Also, you said that your system is new.  You can look into having served through your warranty.  You also need to make sure that it is not getting too hot.  Laptops produce a lot of heat and if it doesn't get good ventalation / or enough, then he can begin to display this type of behavior.  I had to go out and get a 'cooling block' for mine to keep it cool.  I hadn't started to have problems because of the heat, but I decided on my own that he was too hot.   Hope this bit of info helps.

• need to cut a word in half and insert text inside, in Illustrator or InDesign

  need to cut a word in half and insert text inside, in Illustrator or InDesign, like this: http://looksgreat.Tumblr.com/post/56189410707/tutorial-letra-dividida

  Do it like this:

  

  Start with a line of text. Draw a rectangle on the half top, select both and his Cmd/Ctrl + 7 to make a clipping mask.

  Now copy, drag down to make a duplicate. Direct select the top of the mask and drag it down below the type.

• When I converted a PDF file to WORD. DOC, it opened in read-only and I'm unable to edit text.  How can I solve this problem?

  When I tried to convert a PDF to WORD file. DOC, it opened in read-only and I'm unable to edit text.  How can I solve this problem?  I don't know how to change read-only.

  Hi Judith,

  I'm sorry that the subscription has not worked for you. I cancelled it and treated a full refund since you cancelled within 30 days.

  Best,

  Sara

• How to crop an image pdf of permanently and insert a text using Adobe Reader version 9.5.5 box.

  How to crop an image pdf of permanently and insert a text using Adobe Reader version 9.5.5 box.

  Adobe Reader cannot edit a PDF file somehow.

• How to create a script for the name of the channel to take and insert text on profile in CS5

  I am a silkscreen and I print my Photoshop starts. I regularly work with multi channel files or RGB files with additional color channels. I created actions to place check marks, resize images, etc. to be ready to print manually but I create for each display text labels, if they are absent from the original work.

  
  

  The files I work with have named pipes as "basic white, red, green, blue 284" etc. which indicates the color of the ink. I want to be able to do is create a script that copies the text of the channel name and insert it into a separate or each/all channels to the top of the file, so that when I print every positive there is a label corresponding to the color of the ink.

  
  

  I don't know if this is even possible, and I am limited in my knowledge when it comes stock and no experience with scripting and have had pretty good luck in the past for actions to do what I want without unnecessary steps.

  
  

  On my target action registration, it creates a new channel with each individual reg mark then combined in a separate channel in which I just copy the contents and select all channels of ink and fill with black to make them appear, I am happy with the steps that must be that it is not too complicated and if it could do the same with labels I would be happy with that.

  
  

  Thanks in advance!

  Something like that?

  // the color used for the text
  var black = new SolidColor();
  black.rgb.hexValue = '000000';
  // set this to space the labels
  var horizontalOffest = new UnitValue(20,'pt');
  var doc = app.activeDocument;
  var currentLayer = doc.activeLayer;
  var textLayer = doc.artLayers.add();
  textLayer.kind = LayerKind.TEXT;
  // font requires the postscript name of the font
  textLayer.font = "ArialMT";
  textLayer.textItem.size = new UnitValue(9,'pt');
  textLayer.textItem.justification = Justification.RIGHT;
  // set the position for the text. this sets to top right corner of the channel
  // here it is set so the text baseline ends  40pts from the right edge, 15pts down
  textLayer.textItem.position = [new UnitValue(doc.width.as('pt')-50,'pt'),new UnitValue(15,'pt')];
  textLayer.textItem.contents = 'label';// temp label string
  
  for(var channelIndex = 0; channelIndex		   

• I can't insert a graphic image into a new publication: win 7, 24 tb

  Sometimes when you compose a new email, I can't insert a picture into a message. I tried the Insert button and the insert icon. This happens all the time; but, when it happens that I can't seem to make it work. My system is a Win 7 with Thunderbird 24.3.0.5. I tried inserting different graphic images and have tried all the combinations in the Image Properties window.

  I closed and reopened Thunderbird. I rebooted my system. I closed all windows except Thunderbird. Nothing helps. Help! Thank you, Bill Gray

  Bill Gray here once again. I find that if I open another window of writing, then copy and paste my email address in the window - initial, I can insert graphics into the new window.

  What happens in Thunderbird to get there? What happened a couple of times. But at least now I know that I can open a new window of writing and work around the problem. Yet, I'm still stuck with the nagging question: why is it happening?

  Thank you and God bless, Bill Gray

• Opening Word, Excel and PowerPoint files in LabVIEW with digital signature of files

  Hello

  I try to open Word, Excel and PowerPoint documents in LabVIEW (or were then converted into a format that can be opened). After the opening, to fill out checklists can insert a digital signature preset (possibly through an authorisation of user name and password) and save the file while preventing further edit or print a pdf of this report.

  I have a good experience with LabVIEW, but not in this kind of a system.

  I appreciate if someone can point me in the direction to start.

  Thank you very much

  Al

  Regarding (1): there is no ActiveX control to view the Microsoft Word/Excel/PowerPoint files. If you want to display these on a front of LabVIEW, so the simplest solution is to use a web browser on the front panel control. This will allow you to provide the path to the file in the URL of the web browser control navigation and the file will be embedded in the browser control. It would be no different than the consultation within Internet Explorer.

  Regarding (2): assuming that you view the document on the front panel, this looks like the basis of LabVIEW programming, so I don't know what you're asking for here, or that you are having problems with.

  With regard to the (3): I must admit that I'm not quite clear on what will be signed. It also seems that the signing and printing of PDF are two distinct objectives here.

• Graphics problems during the game Age of Empire II in mode full screen in Windows 7

  Original title: screen resolution and/or graphics problem with Windows 7.

  Hi, I had currently two computers in my house upgraded to windows 7, one a Vista XP.

  I am trying to run Age Of Empires 2 on both computers, the game has installed and running with ease, however it won't let you play the game in full screen, and also the color of things like grass and trees appear in red and orange, water displays brilliant purple.

  I tried to change the windows screen resolution and the resolution of the options in the game, but it only changes in the percentage of the screen resolution, that he chooses to play in.

  I can solve this? All advice is appreciated and thanks in advance.

  PS I tried to reinstall and update graphic drivers, both computers have the same problem of new clean installations of windows and Age of Empires 2.

  Thank you

  It is a problem due to the fact that AOE 2 was built on the platform Windows 95/98 Win9x. It will expose a few graphical artifacts while playing. You can try setting compatibility Win98 or Win95 check. There is also a workaround that may work in my opinion. You will need to search for "how to run StarCraft (1) on Windows 7" in Bing (Alternatively, Google: P) and it would show a site with a .bat file that could solve the problem of graphics in fullscreen.

  I hope this helps.

  What I did with StarCraft was this:

  On the desktop, right-click and select new text Document. Inside the Document, type this

  Taskkill /f /IM explorer.exe
  D:\"StarCraft"\"StarCraft.exe".
  Start explorer.exe

  Just replace the location of StarCraft with the location of the AOE II.

  Save the file as: 'AOEII.bat' and then set the file type to the text file to all files.

  What happens is that if corrects the discoloration and restart the explorer again after the end of the game. Although there is no easy way to change the icon of the good bat file: P

• My slider controls when using Excel and Publisher became too sensitive

  My slider controls when using Excel and Publisher have become too sensitive and more often, don't do what it is that I'm willing to do.  For example: while in Publisher if I click on a photo, that I've inserted, and try to move it, it will automatically open the Format Picture option.  She does it with a number of other features as well.  If I'm in Excel and I'm trying to highlight a phrase, it will begin to highlight the requested sentence, then the middle of it will stop after the sense that I'm going with my cursor and it will pass at the end of the sentence.  I guess you could say this kind of "jump" and the mouse became too sensitive with the controls.  It's really frustrating and it feels like it has a mind of its own.  At first, I thought maybe a low battery mouse, because she was the way she does when the battery is dying.  Changed the battery and no change.  I also tried to set my mouse speed and still nothing.

  Any ideas?

  Oh and btw this just started to happen during the first 4 to 6 months.

  Hi H.Morton,

  1. the problem occurs with excel and publisher?
  2. what operating system do you use?
  3. did you uninstall and reinstall the mouse drivers?
  4. have you tried with another mouse and check?
  5. do the mouse has a selection of sensitivity on the mouse itself?

  I suggest you to update the mouse drivers and see if that helps.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Display of Windows Vista, the icons and all THE GRAPHICS suddenly pixelated, appear low quality at the highest resolution and colors

  Please help, out of nowhere on my screen - background, all icons, all graphics (including the Explorer and other programs) have become rough and pixelated and seem very low qualty even if my display is set to the highest resolution management settings and color. I've not been able to find a way to restore and have no idea why it is doing this in the first place. It's really bothering me, it's hard to read (text appears fuzzy and broken up, not smooth and sharp, icons have white or another pixelation around them and do not have the 'look of glass'.) I was wondering if one of the old games my children changed my settings somewhere but I've lived every control panel I find and have not been able to correct the problem.  Even the buttons (back, forward, refresh, etc.) in Explorer have bad pixelation. That's happened? Help! :) Thank you

  I would also update the drivers, firmware or software for your monitor at the same time.  Also, if you have another monitor, swap them to see if the problem goes away or moves - then we can pretty much reduce the question to the screen and not the video card (and if the updated drivers do not resolve this problem, then it's a hardware problem and you can either take a workshop of computer service repair or simply a replacement of purchase screen.)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 8 applications does not appear correctly. background becomes black and text becomes blurry and apps close automatically

  WINDOWS APPLICATIONS 8 DOES NOT PROPERLY

  • the black background become apps. for example, in app people white background become black
  • the text becomes blurry and apps works slowly
  • While only game apps work properly
  • All these take place but live tiles work properly

  After an update the drivers for my graphics card, I was disappointed to see that the problem was not resolved.

  Then, a few days later I completely uninstalled the drivers for my graphics card and reinstalled them.

  And here, my apps 'Modern' redisplay correctly.