Text which shows without paragraph breaks

Similar Questions

• [ID5] Find the line, without paragraph break

  Hello

  I want to find lines containing a specific character style. But when this line is at the end of a paragraph, he also selects the paragraph break. What GREP I use to select the line without the break?

  Best regards, Sjoerd

  You are right: if return paragraph has also been formatted with this style of character, he wil appear in the found text. To stop GREP optional paragraph back, you can use

  [^\r]+

  which loosely translates "all consecutive Run of characters, none of whom is a paragraph return.

• Divide the long text into multiple blocks of text by PARAGRAPH breaks, and not by line breaks

  I'm creating a catalog of the auction. Right now I have a long table in Word, where each line is an item in the catalog.

  I know how to place the table in InDesign and convert it to text so that each line is its own paragraph (click table > > convert table to text).

  Now, I want to run a script so that each paragraph becomes its own text box.

  I tried to use the script of Jongware mentioned on this thread (https://forums.adobe.com/thread/652308), but it breaks to the top of each LINE in its own text box, not each paragraph.

  Previously, a solution that worked for me is to manually adjust the text boxes until each paragraph is in a separate box, then use the SplitStory script to remove all the. However, the catalog has over 100 articles in there it is time consuming. Is there a way to separate each paragraph into its own text box automatically?

  Well, I guess you can set up a master page with two frames of text related to this topic.

  To keep Options (see above), choose 'Start in the new framework' rather than 'new page '.

  Create a page in the document and apply the master page.

  Then follow the first set of instructions, I gave above. For autoflowing, click inside the box of one of the blocks of text on the master page (I mean, do it on a regular page that has the master page applied; the text block should appear with a dashed line, because it is on the master page). Now, all text should flow between these two images, two images per page which gives you 1 point in each image.

• Paragraph without reason breaks

  Hello!
  I'm working on a book on the CS6. I have a lot of experience with older versions of InDesign, but I just got CS6, so it's new to me. I use "save options" for my body text paragraph style and it is not to break the paragraph with less then 2 lines at the beginning and the end of the paragraph to avoid widows and orphans. However, for some reason any paragraphs break in several places before the two last lines even if there is plenty of space on the current page.

  I also use notes and set it to leave at least 3 mm above the notes. I thought that this could cause problems but remove notes does nothing, so I guess that has nothing to do with it.

  Disabling the options keep solves the problem, although it leaves me with loads of orphans/widows throughout the book that I have to fix manually. I tried to create a separate paragraph without options keep style and apply it only to the paragraph styles that are causing problems. This doen't help if instead, these paragraphs are broken before the last single line.

  Here is a screenshot of what I'm describing. Have no idea about what could happen and how to solve?

  I just discovered folklore caused the problem. I had accidentally applied the option to keep up with the 2 lines. I use a Swedish version of InDesign and do recognize not all orders. It must be a valid excuse!

• Is there a way to tell where is the Visual line in paragraph break?

  Hello

  What I want to do is to find the places where the PS breaks the line in paragraph text and place real line crossing it. So if I if adjust to the width of a bounding rectangle, the text would still formatted the same way visually.

  Thank you

  If I resized the text layer as a whole, the line breaks are maintained. But what I needed was to be able to evolve only the bounding box, without scaling the text and keep line breaks.

  In any case, I found a way to do it.

  Duplicate the text layer. Convert to point text. This will add breaks in these places. Find the positions of the breaks and introduce them to the original layer. Remove the extra layer.

• Paragraph breaks appears no not after the publication of site

  I just released updates to the site of the client, and on one of the pages, none of the paragraph breaks are appearing (they had been there all along, above). Now, the page is a long paragraph.

  Why this is happening and how to fix it? It looks like an editing glitch...?

  The page in question...

  Whispering Waters testimonies | Effective, safe and gentle acupuncture

  Hi Bryan,.

  Judging by the HTML, it seems that Muse has improperly promoted the character style 'Italic testimony' at the paragraph level. Character styles are for strings of text (i.e., spans) within paragraphs. Recently, I saw another case of this kind in the paragraph Styles not export properly

  In all cases, you try some of these workarounds:

  1 put the style of character to 'None', then reapply "Italic Testimonal"

  or

  2 remove the 'Italics Testimonal' link (using the button 'Delete' in the character Styles Panel)

  If no help, please send your .muse file to [email protected] with a link to this thread and 'ATTN:Abhishek' in the subject.

  Thank you

  Abhishek

• CSS is now a line without line breaks?

  I need to change the css of a Web site. In the past the css was readable. Now, it's just a line without line breaks or paragraphs. Is - this intentional or y at - there a way to change the output?

  This is what it looks like now:

  

  That's what it looked like before:

  

  So far, I have not found a way to change this. Is there a way to change it, what it looked like before?

  Muse now has minifies CSS by default to improve page load time. If you want to return to the easier to read the CSS, there is a setting in the Properties dialog box for the Site, on the Advanced tab.

  

• Paragraph style to control paragraph breaks?

  Hi all

  How to add using the paragraph Styles paragraph breaks?  I'm sure that the answer is pretty obvious, but I don't have the vocabulary which comes with a bottom of page/print layout, so I'm probably looking at the setting but do not know.

  What I want to do is to create a paragraph style that inserts an extra paragraph (back) at the end of a paragraph break so that instead of something like this:

  ---------------------------------------------------------------
  

  Voluptat vitis dolorro to molupta tempos autet etum alis res int maio voloriorest re. ULPA as debit prae vellaut ommoloratur susdamus endandit that sandesci corerspiet quis essequid evenis periorp oriberspidit illab in cum hit porpore periam ipic to totaess imintiam, quia poratem alicid ullabo.

  Erspernate nostiis re in poria volum ipsum dolorem no nudes.

  Aut aut Upti pores as mod that cusaera estiatest voloreni num alignatio re. And poremped that nemquossunte ducilignatem fugiand untionsendia ut quodis uring aut.

  Pici doluptam and re sandebis impelit asitate voluptate parum ilibustrume resequo not diciur?

  --------------------- --------------------- ---------------------

  
  

  .. .the paragraphs look like this:

  --------------------- --------------------- ---------------------
  

  Voluptat vitis dolorro to molupta tempos autet etum alis res int maio voloriorest re. ULPA as debit prae vellaut ommoloratur susdamus endandit that sandesci corerspiet quis essequid evenis periorp oriberspidit illab in cum hit porpore periam ipic to totaess imintiam, quia poratem alicid ullabo.

  Erspernate nostiis re in poria volum ipsum dolorem no nudes.

  Aut aut Upti pores as mod that cusaera estiatest voloreni num alignatio re. And poremped that nemquossunte ducilignatem fugiand untionsendia ut quodis uring aut.

  Pici doluptam and re sandebis impelit asitate voluptate parum ilibustrume resequo not diciur?

  --------------------- --------------------- ---------------------

  Thank you!
  

  What you want, it is to have the space before or space after the series to add space.

  The amounts that I use depend on the grid (if used) so that the amounts of space before/after piling up for the amount of baseline grid.

  Mike

  

  Post edited by: MW Design
  Additional screenshot

• Text Wont Show, and I can't drag and drop

  OK well when I insert the text it does not show, but it shows what I wrote on the side. I have contact support their answer was that they cannot help me because I'm the trial verison. I'll just buy a program if the trial version does not work its that simple. Also when I try to drag-and - drop an image a little apears circle with the line through it. I have admin rights.

  Usually when you can't see text is is one of the following.

  (1) the text color is the same color as the background

  2) there is a layer above the text block text

  (3) the opacity of a text layer is almost transparent (opacity is less than 100%)

  Mixing A 4 mode) is applied to a text layer

  (5) a layer style is applied to a text layer that is either 1, 2 or 4

  As well as dragging and abandonment, just drag the file from your respective files viewer and drop it on the bottom of photoshop (it opens the file assuming it's a file that photoshop can read)

  So check that the file can be viewed in another application to make sure that the file is not corrupted

  Make sure that the file name extension is support than photoshop. (in photoshop, go to the menu and select file > open, and then find the text which says file type and click the box next to it.) Who goes down a list of the types of files supported. If it is not listed, it will not open)

  That being said there are times when he has to work and did not, so if something here doesn't work, come back and someone can help.

  Moreover, it is better to post what version of photoshop you have, what operating system you have and a screenshot of photoshop so that we can see what you see. For any future reference.

• Text fields show the errors

  Hi all, I'm trying to implement some classical dynamic TextFields, but I see errors when the text attempts to return. What I'm trying to implement a system which shows a tolkens and an eguivent of money, I use the code

  tolkenDisplay.text = String (numTolkens)

  var decValue:Number = numTolkens100;

  currDisplay.text = "$" + decValue.toFixed (2);

  all the internal stuff is OK but what is rendered is false...

  If numTolkens = 0

  tolkenDisplay.text = '0'-> display anything

  currDisplay.text = "$0.00" - displays correctly

  If numTolkens = 100

  tolkenDisplay.text = "100"-> the display shows "1".

  currDisplay.text = "$1,00"-> the display shows "$." 00 ''

  I think there is something in the TextField that is not set correctly, I tried to put automatic resizing in the CENTRE but that does not solve a lot...

  Any ideas?

  Thank you

  Make sure that your fonts are included and you do NOT tlf textfields.

• < h2 > without the break?

  Is is possible to use < h2 > without the break?  In other words, I want a straight line of text with just a few of the words using < h2 > and the rest of the standard text. (Key words)

  Here is my code;

  < div id = 'Direction' > < Little Red Riding Hood h2 > < / h2 > was a scary creature.  Draped with its blood-red cape and her eyes hidden within the shadows at Cap, she floated dangerously through the dark woods, the notes of her laugh manincal still haunts the bravest of creatures. < / div >

  Yes, it is possible, even if it is not supported by all browsers. You can use a style rule for the display of a block-level element, such as

  to run in the following text.

  h2 {
    display: run-in;
  }
  

  Besides the fact that it is not supported by all browsers, there is the question of if

  is the label that is appropriate to use in this context. The

  tag is intended to indicate a second-level heading. If you think using a more appropriate. However, when it comes to a subtitle.

  is very good. Another approach that should work in all browsers is the following:

  h2 {
    display: inline;
  }
  

• shock wave. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder

  Shockwave for Director 12.1.1.151 does not start, just with that. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder. Reinstalled but made no difference. If you can help would be grateful. Thank you.

  I restored my computer to an earlier version, installed latest version of firefox and the Shockwave for Director, everything is fine now. Thanks for your help guigs2.

• Is it possible to incorporate a note in a formula? In other words, to insert text which would be ignored by the formula processor?

  Is it possible to incorporate a note (a comment text) in a formula? In other words, to insert text which would be ignored by the formula processor?

  None

  You can attach comments to a cell:

  

• Is it possible to add the cell capacity to an iPad which is without cellular capacity?

  Is it possible to add the cell capacity to an iPad which is without cellular capacity?

  # If the iPad is a unique model of Wifi, it lacks the internal hardware for cell connections and may not be added.

• I have a 2560p which shows driver missing for 'Base system device '.

  I have a 2560p which shows driver missing for 'Base system device '. Shows the location

  PCI Slot 2 (bus PCI 35, device 0, function 0).

  What is the device and where can I find the driver? Thank you

  Excellent thanks a lot!