TextField, submitted using c ++ does not

Similar Questions

• Cannot create a Microsoft account (already exists) and cannot use it (does not exist or is not available)

  Hello
  I need help - I installed Windows 8 Pro and I create a Microsoft account using my personal address (not a Windows Live) everything was fine and then I had a problem with the approval of the account and I made the decision to reinstall everything.

  When installing Windows 8 Pro back, I'm not able to create a Microsoft account because it says already exist and when I try to connect using it does not exist or not available, I used a local account and it works very well and also a new account from Microsoft and it works fine.

  The problem is that I am not able to use my official address as a Microsoft Account

  Could you please help me.

  Thank you
  Chicago

  What is the name of the mental illness?

  Duh!

  An account will be considered as inactive if you don't sign not for 270 days or within the first 10 days after registering. The account will be deleted if it has been inactive for 365 days. When the account is deleted, the user name is immediately available for registration.

  Try this status Checker-

  Status Checker

  When you went through the previously mentioned account recovery process link, do you have provided an alternate email address and you will be notified that you would like to be contacted?

  Try to re-create the account as a new account, if it is still available.

  Windows 8: use a Local instead of Microsoft Live account account to connect

  http://www.tech-recipes.com/Rx/22437/Windows-8-use-local-account-instead-Microsoft-account-login/

  How do to return to the account of Local Microsoft Account, sign in on Windows 8

  http://www.thewindowsclub.com/switch-local-account-log-Live-ID-Log-Windows-8

• I want to cancel everything useful and does not want me working

  I want to cancel everything useful and does not want me working

  Hello

  You want to cancel your Adobe licenses or identification code Adobe completely?

  Kind regards

  Sheena

• Problem using iCloud, does not refresh

  I use the latest versions of iOS 9.3.2 on my iPad and iPhone. I always use transfer, icloud and photos of flow. But last week, I noticed that iCloud does not update the pictures on both devices. I have 2 GB of free space 3. Activate all options on iCloud. I've made up, I disabled iCloud on devices. Nothing!  It does not work. Internet access is perfect. When I opened the Photos, there is a process "download (or download) 100 Mg / or downloading pictures 125 ' and does not continue. What should I do? Please, help me!

  Thank you!

  On both devices, tap Settings > iCloud > Photos then the iCloud rocking library Photo OFF then on IT.

  Give iCloud minutes re sync your data.

• External USB Plug & use mouse does not

  I recently bought a plug & USB mouse to use instead of the touchpad on my computer satellite phone.
  After plugging USB that it loads, but then the dose of the mouse does not work.

  The touchpad still work very well even with connected USB.
  It is not the mouse, as I have tried in various other machines. I also tried other but still the works of touchpad mice.

  From my limited knowledge the mouse appears in the player of games?
  So how can I get the USB mouse works?

  Would be very happy to any local computer help companies want more than 60 pounds to sort, and I don't think that it can be difficult.

  Thank you!!

  Luffy

  Hello

  You say; the USB mouse does not only work on this laptop.
  The mouse works in relation to other computers right?

  First check if the mouse is compatible with your operating system.
  If Yes, then you should check if your USB ports work in relation to other USB devices.
  If other devices would work so I would recommend check if a driver is needed for this USB mouse but generally a form of a gaming mouse has not all drivers

• A few songs using WMP does not

  My PC has CPU power supply card and the mother replaced this week. No programs had to be reinstalled. However, when I try to play a few songs in the music player for my C game and some don't, and I get the following message Windows 7 "your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your calculation. Can someone tell me what to do to play tracks currently not play? Do I need to install anything? Thank you.

  Hi BorisCelser,

  
  See the methods mentioned below and check:
  
  Method 1.
  
  To resolve this issue, reset the DRM Bank on the computer. To do this, follow these steps:
  1. If Windows Media Player 12 is running, quit Windows Media Player 12.
  2. Locate the DRM folder on the hard disk, and then rename the folder to DRMbackup DRM.
  Note by default, this folder is in the following location in Windows 7:
  \ProgramData\Microsoft\Windows\DRM
  
  3. visit the Microsoft Web site at the following address:
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp
  4. follow the instructions on the website to update the safety component of Windows Media Player 12. This procedure allows you to obtain new licenses for media content. You can also reset licenses for purchased content so that you can play that content on a computer.
   
  Note On a Windows 7 computer, you must run Internet Explorer as an administrator before update you the safety component of Windows Media Player 12.
   
  To do this, follow these steps:
  a. click Startand then click all programs from .
  b. right click on Internet Explorerand then click Run as Administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  Note You must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.
   
  For reference:
  Refer to the section how can I download usage rights? in the article below.
  In addition, you can see how to restore my usage rights?
  The Player Windows Media DRM: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions
  If still it does not refresh the usage rights DRM you will probably have to visit the Web site was purchased to update DRM information for the file.
  
  Important: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
   
  Check out the link for more information below.
  
  Windows Media DRM player:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions
   
  Hope this information helps.
   

• Loading the PDF using Stageview - does not not in Playbook

  Hello

  I am trying to get this problem because it's a situation to make or break for my prototype.

  I created an eBook of the sample using Adobe InDesign and tried to export to a SWF file to load into my project mobile flex, but the performance on the playbook is very slow and lags a lot, and I can't get any additional perfect such as page transitions, zoom, search, etc..

  So I exported the eBook as an interactive PDF, added Javascript to the PDF created to recognize commands such as the navigation of the page, find the page number, research base, zoom in/out and an interactive table of contents. I was able to get this working on the simulator of flash builder from adobe on my desk, but unfortunately the PDF does not open in the play book

  I uploaded a link to an example of project that has the code for display that loads the PDF using Stageview... everyone please if you can help me so I apprecaite it.

  It of about 4 months of work and will be a big problem if I can't get the PDF file to load.

  Thanks in advance

  Please see the link to the project:

  https://docs.Google.com/open?ID=0B0WguNnkiW_fTTZaZEFTeEZTU3VIcmkxZDhTM XBydw

  Ah, QNXStageWebView. This link: http://renaun.com/blog/2010/12/using-playbooks-qnxstagewebview-with-flex-hero-mobile/ it should work well within Flex. And you have the "possibility to use JavaScript between the app and web display.

• One calling CFC-another CFFUNCTION using 'that' does not work

  Hello, all,.

  I have a CFC (let's call it test.cfc) who is supposed to manage a lot of internal calls to other CFFUNCTIONs.

  I had read that using "this.functionName (args);" should work.

  However, for some reason it isn't.  I always use ' components.compName () .functionName (args); "to make it work.  Pseudocode:

  <cffunction name="functionA" access="private" output="no" returntype="any">
      <cfquery name="getThese" datasource="#application.thisDSN#">
        SELECT * FROM tableA ORDER BY ID
      </cfquery>
      <cfreturn getThese />
  </cffunction>
  

  and

  <cffunction name="functionB" access="private" output="yes" returntype="void">
      <cfset tmp = this.functionA() /><cfoutput>#tmp#</cfoutput>
  </cffunction>
  

  This results in the error: make sure that the name is correct and that the component or interface exists.

  But the following works fine:

  <cffunction name="functionB" access="private" output="yes" returntype="void">
      <cfset tmp = components.test().functionA() /><cfoutput>#tmp#</cfoutput>
  </cffunction>
  

  Any suggestions as to why "new this.test () .functionA (); ' does not work?

  V/r,

  ^_^

  The this scope is public scope. You will need to change your functions to be access = "public"

  
  

  Note: This scope identifier functions as this keyword in JavaScript and ActionScript. CFCS do follow the Java class model and the this keyword behaves differently in ColdFusion and Java. In Java, it's a private, field while in ColdFusion, it is a public scope.

  Variable scope - ColdFusion and CFC, English documentation - Adobe learning resources

• Update Siebel using OPA does not

  Hello
  I installed OPA and pre-tests works very well. But when I try to update the record in siebel using rule (follow same steps as what is given in the policy of automation - Siebel-> Tuitorial-> use an integration object to update a Siebel business component.)
  
  But its giving error.
  When I use the adapter Siebel EAI Update method
  
  Error when calling service "adapter of Siebel EAI', 'Update' method in step"update employee". (SBL-RPR-00162)
  
  * Update operation on the component for the integration of "Paid worker" has failed because no record corresponding to the business component 'Employed person' '[Id] = 'global' ' search specification could be found. (SBL-EAI-04403) *.
  
  When I use the adapter Siebel EAI Synchronize method
  
  Error during the service call "adapter of Siebel EAI,' method 'Synchroize' in step 'updated employee". (SBL-RPR-00162)
  
  * Required field is missing in the instance of the component for the integration of "Paid worker" with the user key ' [Id] = "1-LAIHMQ" ": 'Connection name' is a required field." Please enter a value for the field. (SBL-DAT-00498) (SBL-EAI-04389)) *
  
  [entity - instance.row] does not receive the row_id. If I hard code a value card, updating the registration data row_id.
  
  Also, I'm not able to set the flag that is given in the attribute 2.
  
  Help, please.
  
  
  Kind regards
  Simon

  Simon,

  It seems that the initial assessment is not completed correctly.

  When you run the sample through the Simulator (according the tutrorial), you should be able to see the outcome of the application evaluation (step 1 in workflow) fill the property IO 'external '.

  You should be able to see that the external I/o is filled with the answer and there is an instance of entity with the name = 'global' and line = "0-1".

  Looks like you map entity instance.name = id in the data mapping so defined his tent update an employee with the name 'global' who has the habit of work.

  See you soon
  Frank

• SwapImage using cursor does not change

  On my Web site www.albertson-design.com that I use, I use the behavior of swapImage to display a thumbnail to a larger size in another frame. The function works fine, but I'd like the cursor to change suddenly sharp arrow hand, as she normally does with a link. Currently, it does not change and gives no indication that by clicking on the images of sm does nothing.

  I know that there must be a way to do this, but have not been able to find. Can anyone help?

  Thank you

  Jon

  The suggested method for the CSS is not the right way to do it.  But to tell you the right way, we would have to see your code.

  If you do not get the pointer, which suggests that you have applied your behavior (Swap Image) directly to the tag, which is not the right way to do it.  Your behavior must always be applied to an anchor tag that wraps the .  You can change this by selecting the image in DW, using the selector of event on the Panel of behavior to the change onmouseover to onmouseover event.

• redirection using header does not...

  Hello
  I created a simple insert page and after insertion I want it to be redirected to another page which has a list of entries.
  Somehow the header forwarding does not work. I tried relative SiteName in the insert after go to option and then tried gives the full path name but no relief. I tried the redirect at the top of the page (simple redirect as soon as the page loads) and it worked. I enclose the code. Some same place what am I what I missing here?

  I finally had the time to work on it. The header already sent has been solved by including the content of the file my_db.php instead of directly in the file. Somehow a white space arises when virtual is used...

• When you try to export data into a program that we use, it does not automatically recognize the file as .xml format. Anyone know what I can do to fix this?

  I tried to uninstall version 3.6 and reinstall. Also, I provided in the workstation image, but it still does not work. The OS is Windows 7 32 bit. This process runs automatically on a XP workstation. In fact, the machine that I've reconfigured was a XP box, but it did not work on this particular machine. Therefore, the reason for the new image.

  See:

  • http://KB.mozillazine.org/File_types_and_download_actions

• hyperlinks using mailto: does not not in Muse [was: mailto: not correct. help.]

  I can't figure out how or where this correct in my BC account for this website in Adobe muse.

  Correctly, I added in the link "mailto: . [email protected] "" to an e-mail link, but every time that I publish it, it appears on my page of e-mail regarding: " mail to: [email protected]'." "

  I can't get rid of this extra "by post to:"part and of course he told me that the e-mail does not exist. "

  I have no problem with my other muse Adobe sites I built, but this will not change no matter what I type in my email link.

  Help, please

  There is no quote,

  Wickedhand wrote:

  I can't figure out how or where this correct in my BC account for this website in Adobe muse.

  I added properly in the link "mailto:[email protected]" for an e-mail link, but every time that I publish it, it appears on my page of e-mail regarding: "mail to: [email protected]". "»

  I can't get rid of this extra "mail to:" part and of course he told me that the e-mail does not exist.

  I have no problem with my other muse Adobe sites I built, but this will not change no matter what I type in my email link.

  Help, please

  its just mailto:email@email

  

• Submitting a form does not

  Hello

  Just put a site in a few minutes there, here is the link to one of the pages:

  http://www.urbanedgeliving.com/connect-with-us.html

  Sending the form does not work. Nothing fits after clicking on submit, thoughts on the matter?

  I solved since she, Yes. Required fields have been check individually. Thank you for your response.

• Master page with rollover menu, using States, does not work for all pages?

  Hello.

  I created my masterpage with a basic at the top menu. It has two States. The 1st State is normal and State 2 is a simple rollover behavior, just a different color.

  Why my menu would work perfectly on the page ' 01', but then the reversal function does not work for other pages? (portfolio 03 etc.). She has just the hoverover slider and the link, but the color does not change.

  I have something wrong?

  Thanks a lot for all the help on these forums

  Make sure that all the subpages have a second State added to them. You

  do not put any content on this State, but it must be present

  the transfer of work from the watch page.

  If you do not already have that second State, trying to link then cancelled

  the subpages of the master page. I came across this scenario recently

  because I had created a master page after some of my subpages have been

  already built.

  HTH

  Jim Babbage