that indicates the error mfc90.dll. I get it when starting 2020 Design technology app? Under XP Pro.

Similar Questions

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  uninstall all cc (if nothing is installed) by using the adobe uninstaller programs.

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer, and then install, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs of cc.

• that means the error: 213:11

  that means the error: 213:11

  I have tried to re - install, but it keeps returning the same error

• Try to download the installer of CreativeCloud, I get the error code 213. How can I fix this so I can download Adobe Pro XI?

  Try to download the installer of CreativeCloud, I get the error code 213. How can I fix this so I can download Adobe Pro XI?

  Hi Lynn,

  You I'd like to try to re-run the download with your anti-virus software disabled using a newly created Admin account.

  -Dave

• Looking for an example of "function that returns the error text.

  Environment: APEX 3.1.1.00.09 on AIX 5.3
  
  I'm looking for an example implementation of the posting of the "function that returns the error text.
  
  I would like to write a database function that does the validation logic and return the text of the error.
  
  Is it possible to create multiple lines of text of error based on error conditions?
  
  I'm trying to use it at the end of the input data to go on the set of the 'document' to the entry and highlight all error conditions encountered before the 'document' is subject to additional processing.
  
  I wrote the function and reference it in a posting as ' validate_stuff (: P3_DOC_SEQ); »
  
  I have an error message "validate_stuff is not a procedure or is not defined.
  
  The object is a function, not a procedure. It is defined to return a parameter VARCHAR2 hoped posting if it is not NULL.
  
  When I run the SQL function * more and spend in a number of documents are returned the correct error messages.
  
  Any direction is greatly appreciated.
  
  -gary

  Hi Gary,.

  You must RETURN the result of the function:

  BEGIN
   RETURN validate_stuff(:P3_DOC_SEQ);
  END;
  

  Andy

• What does the error code 1003? It appears when I want to perform an automatic update of the creative cloud.

  What does the error code 1003? It appears when I want to perform an automatic update of the creative cloud.

  Creative cloud update error

• I get a message that indicates the component that you are trying to use is on a CD-ROM or other removable disk that do not exist insert the 'Sonic Update Manager' disk and click ok

  He reads at the top of the installer of windows message

  Hi gerardoram9160,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. do you have 'Sonic Update Manager', installed on the computer?

  If you get the error message when the uninstall or uninstall the program, see the Microsoft article and try the steps mentioned below.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows 7 boot receive the error - melesp.dll could not be found error message.

  I recently removed a Trojan horse (js/Medfos, js/seedabutor and win32/tracur) using a combination of Malwarebytes Anti Malware and Microsoft Forefront.   The two programs report successful removal of serious threats.   Now on startup, I get the error message:

  Users/shirley/AppData/Roaming/melesp.dll

  specified model is not found.

  I am running Windows 7 (64-bit) and Internet Explorer version 9 (9.0.8112.16421).

  Apart from this error at startup, everything seems to work OK.

  How can I fix or remove the error message?

  Thank you

  Shirley

  Hello Shirley,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, I understand that you receive an error during the startup of Windows 7.

  Now let us perform some troubleshooting. All the steps in the same order as listed.

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• qping indicates the errors and warnings

  Hi all.
  
  We have a small group of 34 knots run, master node 1 and 2 file servers.
  Today, I run qping and the result seems warrying...
  Any kind soul could help me understand, and if there is a problem help me solve it?
  
  Here are a few commands and relative performance.
  
  
  # qping - info master.cluster 6444 qmaster 1
  17/05/2011 11:16:43:
  SIRM version: 0.1
  SIRM message ID: 1
  start time: 01/04/2011 09:56:58 (1301644618)
  execution of [s]: 3979185
  messages in buffer: 0
  write messages to buffer: 0
  Nr. of clients connected: 35
  status: 2
  Info: HAND: E (3979184.93) | signaler000: E (3979184.51) | event_master000: E (0.05). timer000: E (0.08). worker000: E (0.05). worker001: E (2.85). listener000: E (0.05). listener001: E (0.05). scheduler000: E (2.84). jvm000: E (3979184.04) | ERROR
  malloc: arena (0) | ordblks (1) | smblks (0) | hblksr (0) | hblhkd (0) usmblks (0) | fsmblks (0) | uordblks (0) | fordblks (0) | keepcost (0)
  Monitor: disabled
  
  
  
  # qping - info node11 6445 execd 1
  17/05/2011 11:28:56:
  SIRM version: 0.1
  SIRM message ID: 1
  start time: 05/01/2011 16:15:27 (1294240527)
  execution of [s]: 11384009
  messages in buffer: 0
  write messages to buffer: 0
  Nr. of clients connected: 2
  status: 1
  Info: sge_execd_process_messages: E (11384006.93) | WARNING
  malloc: arena (0) | ordblks (1) | smblks (0) | hblksr (0) | hblhkd (0) usmblks (0) | fsmblks (0) | uordblks (0) | fordblks (0) | keepcost (0)
  Monitor: disabled
  
  
  If I run qping on the nodes of the execution, I get on all those the wame WARNING:
  # for i in {1.9}; do qping-info node0$ 6445 execd i 1; fact;
  17/05/2011 11:30:04:
  SIRM version: 0.1
  SIRM message ID: 1
  start time: 05/01/2011 16:15:47 (1294240547)
  execution of [s]: 11384057
  messages in buffer: 0
  write messages to buffer: 0
  Nr. of clients connected: 2
  status: 1
  Info: sge_execd_process_messages: E (11384055.53) | WARNING
  malloc: arena (0) | ordblks (1) | smblks (0) | hblksr (0) | hblhkd (0) usmblks (0) | fsmblks (0) | uordblks (0) | fordblks (0) | keepcost (0)
  Monitor: disabled
  
  
  EMS version: 6.2 update 6
  
  # uname - rms
  Linux 2.6.18 - 194.32.1.el5 x86_64
  # cat/etc/redhat-release
  Version of centOS 5.5 (Final)
  
  Thank you very much for your help.
  Robi

  Hi Robi,

  I think that you are worried about the 'E' / 'W' and 'ERROR' / output 'WARNING' on line 'info', correct?

  There's no problem with your demons execd/qmaster. The problem is that the recall of qping code was not being updated to changes last threads in the devil qmaster and execution. The data are interpreted wrongly by the recall of qping and it is currently ranked as issue of CR 6770533 - "qping-exit info wrongly displays warning and error messages.

  Here some background:

  Time in media information (for example ' worker001: E (2.85) ") indicates the time required for (here a worker thread) go completely the mainloop. But workers does not permanently their mainloop more (they are waiting to get fired) and that's why time cannot be used to check if the threads are suspended.

  You can ignore all the outputs in the "info:" and "State:" line - the remaining output is always valid.

  Best regards

  Christian

• Firefox does not start, the error xul.dll thowing

  Hello!
  Stupid Flash plugin crashed my browser, and now efforts to launch the Firefox browser leads to the following error:
  Head: 'firefox.exe - Entry Point not found ".
  Text: "the procedure entry point not found hb_ot_layout_table_get_script_tags in the C:\Program Files (x 86) dynamic link library \Mozilla Firefox\xul.dll."

  And when I click on the 'OK' button, the following error: "unable to load XPCOM. And now it is all browser activity. In the installation folder (C:\Program Files (x 86) \Mozilla Firefox\) xul.dll and other files, including updater.exe, had changed their attribute "update" at the time of the accident of the latter. Dr.Web cureIt utility found no virus there. So, I think, I have to reinstall the browser.
  Is it possible to fix Mozilla with the record of my history and bookmarks? I backed up my profile folder (method of copy - paste), so how can I reinstall the browser and then restore my profile?

  Firefox starts when your computer is in the network connections of the spirit of the mode safe mode enabled?
  
  If this is not the case, try the following steps.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  The report please come back shortly.

• I can't update my windows xp (windows or microsoft update) service pack 2... When he attempts indicates the error number: 0x8024400A

  I can't update my service pack 2 for windows xp (windows or microsoft update) after formatting... during the attempt, it displays the error number: 0x8024400A... Please advise

  Hello

  1. is the service pack 1 installed on your computer?

  2 has there been recent changes made on the computer before the show?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Temporary connection error may occur when you use Windows Update or Microsoft Update.

  http://support.Microsoft.com/kb/836941

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Note: disable the Windows Firewall and antivirus may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

   

  Method 2: I suggest you perform the clean boot and check.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfigand click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  For more information, please go through the link below.

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364

  I hope that helps!