That is to see in time real 4K in after, nvidia qaudro k5000 Titan Z or something else?

Similar Questions

• iPhone battery 5? Phone shuts down saying battery completely died when plug charger. But then he goes straight back to the percentage of power that it is on when it will stop? Should I just toss new is - it something else?

  bartery?

  https://www.Apple.com/support/iPhone5-battery/

• iCloud library not updated iPhone photos of Mac.  This happens frequently and I don't see a way to force him (he always says that he updated all 'on time').  I tried restarting both devices.

  iCloud library not updated iPhone photos of Mac.  This happens frequently and I don't see a way to force him (he always says that he updated all 'on time').  I tried restarting both devices.  Mac is running latest update of el capitan, and iPhone is 9.1 (on hold until that the photos are actually saved to update to 9.2)

  Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.

• Create a subfolder of bookmark in time real bookmarking a page in a folder that I created for a registered earlier does not work

  Create a subfolder of bookmark in time real bookmarking a page in a folder of bookmarks, I created a saved bookmark previously does not work.

  Previously on a Windows XP computer, I could choose the "select" option and create a new folder under the folder I chose to put my new bookmark. "." On this computer, the 'new folder' option is not clickable.

  I thought about it. Thanks anyway.

• Updated in time real front panel

  Hello dear colleagues,

  I'm working on a program to test a printed circuit board. The problem is I want to show the progress of the test on the front panel in real time. Global variables found to be very useful, but they are not exactly what I'm looking for, since writing to the variable does not influence the indicators of reading instantly him (naturally).

  If the solution I provided is to have 2 loops: one where the subVIs and the subsubVIs are executed and write their date to the global variable as soon as it becomes available. And a second loop that runs at the same time and goes constantly date of the global variable to the indicators.

  However, this loop 2 solutions feels strange to me. Is there a better way to update the façade in real-time? Something like the pointers or references? I tried the nodes property and 'references' but they both work only locally...

  I wish all a pleasant day

  Tarik

  I usually have a loop which does no GUI: users by pressing the buttons/edit orders digital and/or update of the indicators.  So my trick is to use user events to pass data subVIs and loop parallel to the GUI.  The Structure of the event will see the event and you can just write directly to the terminal of the indicator.  It works very well and is much more scalable than the global method.  It is not also question, so you're not wasting CPU and memory resourses to update an indicator that has no real need to update.

• remove the pop up message "Waiting for in time real (target CompactRIO RT) to answer.

  Is there a way to remove the pop-up message "Waiting for in time real (target CompactRIO RT) to answer" what power is removed the cRIO or when the network cable is disconnected?

  Hey Danny,

  How did send you the commands to the Windows PC the cRIO? You use the remote FPGA host Interface?

  I've seen the pop-up dialog box when the LabVIEW project is not present.

  If you create a Windows VI that sends orders via shared variables or other network mechanism to a VI RT, which in turn controls your FPGA VI, then you should not ever see the popup you speak.

  This tutorial walks through creating an example of monitoring on cRIO with three screws as indicated:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/11199#toc4

  This tutorial is an example of the use of a shared variable to implement a heartbeat, to determine if the cRIO is connected:

  http://decibel.NI.com/content/docs/doc-11046

  I hope this helps.

• How can I remove the photoshop background by default so that I can see my desktop?

  How remove the default photoshop "background" (don't know what Adobe calls) so that I can see my desktop? Let me explain. When I open photoshop, it takes up my entire screen. I don't like it. I have to minimize the background to be able to see my office. I took for fixed the menus on the left, top and right and minimizing the background, but every time I open a photoshop file, the background reappears as a cover on my desk, so I have to keep to a minimum the bottom once again. Photoshop guess I should be focusing on a single file at a time and only this file, when in the real world, I jump to a file in a file, several times having photoshop multiple files open at the same time, not to mention other open files as well as a browser too. There MUST be a default setting to open photoshop without the distracting background, but I have not yet found. Can you please help? Thank you. stem

  Hi superpage,.

  This can be achieved if you are on a Mac.

  Go to the window menu, and then choose Application Frame.

  Kind regards

  Claes

• Satellite A200 - I can't see battery time remaining single percentage

  Hello

  I had a Satellite A200 on Vista and XP, and I'm NOT able to see the remaining estimated battery time. I see only the percentage left.

  For example, I use my laptop unplugged for over an hour (my comments) and I can only see the percentage left (45%), but I can't see the time remaining.

  I have a problem with Vista or XP.

  Is - this natural? What can I do to see the time remaining?

  Thank you

  Diego Alvares
  Brazil

  Sorry, but I would like to know why you think that this is a problem. Where you found information that it must be demonstrated to remaining battery time?

• Get information about the physical location (serial) Visa (slot) in PXI time real (Pharlab)

  Hello

  I PXI system with controller time real (OS Pharlab) and many maps series (about 6 cards).

  The maps in the series are two different models, which each contain several (8431/8 and 8421/8) serial ports.

  And the COM Port enumeration mix and I would like to know the link between COM numbering where it is linked.

  I have already dealt with a few methods:

  1. I've tried using the node property of Visa but he cannot know which card port COM belong

  2. I tried to use the Configuration Library system and don't manage to get general information of the card and not what ports have this card.

  3 try to fill you with the VisaConf.ini, but discovers that ASRL and COM Auto-enumeration is the same.

  4. I tried to look in NISerial.ini, NISerial.dbs and NOR - RT.ini and did not find any help here.

  Application engineer or support suggest to look in the registry of the operating system Pharlab because it is windows based and material information must be stored in the registry

  Further explanation on the problem of PXI enumeration:

  PXI produce enumeration auto for the ports series (COM3, COM4, COM5...) according to the card slot, but when there is a mix of the two models of the system would then list a model (8431) from 3 to 50 (6 cards and 8 ports) and the other model (8421) 51 to 98. so if I have 8421 in 2 and 8431 slot number in the slot number 3 it would list 2nd slot COM59 to COM68 and 3rd slot COM11 to COM19.

  Why not just use NOR-MAX to manually configure the ports?

  The system is essential and can not be stopped for a long time and he operated by people who are not very technical, so the customer who wishes to be able to exchange business cards without futher configuration.

  Thank you

  Or Hirschfeld

  Application engineer

  SK-Electronika, Israel

  www.LinkedIn.com/in/orhirshfeld

  Solved and download the example of solution of community

  Get the location COM (Serial Port) and Port physical location in the chassis

• using the module time real Labview in RTAI

  Hi all

  I want to use the module time Labview in RTAI real for real time due to its open source applications and very good performance. is it possible to make this work?

  If this is the case, can anyone introduce a single study of case or something similar to this?

  Cecile says:

  Hi all

  I want to use the module time Labview in RTAI real for real time due to its open source applications and very good performance. is it possible to make this work?

  If this is the case, can anyone introduce a single study of case or something similar to this?

  I don't think it's possible for anyone outside of OR. LabVIEW Real-time supports this time only Windows as host and as a target only material of National Instruments with specifically targeted OSes or the Pharlap ETS system on x 86 systems with hardware specific enough. Using RTAI as target OS for LabVIEW Real-time applications requires first a few changes on the time plugin real LabVIEW to support this new platform.

  None of the files in time real LabVIEW also created for either platforms OR running VxWorks or OS Pharlap, Pharlap ETS system woud be able to be deployed to a system RTAI, because they are not compatible. In the first place, you'd have to port the bunch of shared libraries that make up the time target real system running LabVIEW on one of these goals to your RTAI system which is in fact a whole new platform of LabVIEW you can create with a little effort from the LabVIEW source code. It's not really impossible for OR as most of the code LabVIEW is written platform completely independently, but it would be a combination of the parameters compilation for course LabVIEW Real-time, with the settings to produce time targets real LabVIEW VxWorks with some additional settings of Linux. Yet, it would be by far not trivial and some parts are actually hardware specific drivers that must be worn too and limit the possibilities of what RTAI material could serve even further. In short not something that would make any commercial sense NC because they invest a lot of resources with no opportunity to sell additional hardware.

  And hell freezes over up front release of NI LabVIEW source code in any form which gives access not - OR used to it!

• Table of waveform in time real Multi ground

  Hello

  I've attached a picture showing part of my code. What I'm trying to do is to create the exact waveform as "Cell pressure (kPa)", but in the x-axis in real-time. I created the "wave form" and that it does not work enough. This table will 'Y' to 'build the waveform"will contain 8 items and when I run the program,"Waveform"shows all the elements in a plot rather than in 8 different locations in a single diagram.

  Can someone choose where I am doing wrong?

  Thank you

  Hoda

  Hoda wrote:

  Table of waveform isn't the time component. I need to show all plots on a graph and real-time

  As you convert scalar data to a cluster to the chart, he has no information indicating the time.  Missing time initial T0 and the dT for the time interval.

  Outside your wire loop right now for the Xscale.Offset property for the graph node.  Because your loop time is 1 second, you must set the DT.  But if it was something else, you must set the XScale.Multiplier property as well.

  

• Time real ADC/DAC for SMPS by using Labview and USB

  Hi all

  I asked the Sales Department of this same question, so here's a two-pronged approach:

  I am reserching a control algorithm for power switching, and so far, its performance simulations seem to be good.  Now, the goal is to implement the circuit from the experimental data.

  I've seen several NI USB DAQ boxes that seem to have the performance, I'm looking for (for example, the box USB-6211 a sampling rate and resolution I need).

  The control algorithm uses the following mathematical functions: add/sub/mult/div/exhibitor and derivative/integral.

  My question is this: is "strong enough" Labview take four-channel data 250Ksps, crunches the numbers in an equation and spits out the answer to an analogue on the channel, while time REAL?  I'm looking for a rate of analog output of ~ 100 kHz.

  Thank you for any suggestions you have!

  -Rick

  Hey,.

  So if you were trying just to perform an input or output, then the box USB-6211 would certainly be able to treat it as the machine clock could manage the inputs/outputs, no software. However, what you are wanting to do, basically a feedback system, he will have to avoid (at least to a USB device) because you need to be able to specify Active which is the output. So, for this reason alone and the fact that you want out of 100 kHz, this device and the USB devices in general will be not an option any what software you use, LabVIEW or otherwise. On another note, you want to make sounds more like live update, not in real time, which is more on the jitter. Bottom line, for these kinds of requirements, you might need to move to an FPGA card, something like the NI PCIe-7841R would work. It's more expensive, but for your needs, FPGA will be the only option and it comes down to the latency of the bus, but also the response time of software. With FPGA, as shown in the first scheme of the following document, you basically close your software through hardware loop.

  Basics of FPGA

  http://www.NI.com/white-paper/6983/en

  -Ryan S.

• Lack of time real plug-in

  I have a project in real time using a 9074 cRIO chassis. The project opens fine on my desktop but when I try to open it on my laptop, a yellow triangle with an exclamation mark inside appears at the level of the chassis and don't see anything below the level of the chassis. If I right click on it, it just says: "the plug-in for the selected item is not installed on your system or the plug-in has a license has expired. I have installed all these elements on this machine:

  NIRIO1310f1

  LV 2013 SP1

  SP1 FPGA development

  SP1 of development in real time

  NIDAQ1400f1

  Don't know what else I could possibly be missing, don't remember installing something more on my desk? No matter what project I try to open, any project won't let me in time real access below the chassis level. If anyone knows what I could miss I would appreciate the help. Or if you need more information.

  Thank you.

  I installed NIRIO14f1 and my phone seems to work again.

• Average displacement Subvi does not refresh the data in time real host VI

  Hello!

  I time real host VI that has evaluate the NI 9215 cRIO block data 9073. He takes analog data and calculates the phase shift. It works well with the connected equipment and displays the results. I need to get the moving average value of phase shift, so I add moving average Subvi, where main VI entries - new value (phase shift measured) and ms and output - average value of travel time. When I run real time host VI it gives me a single data and stop get new data from Subvi. It refreshes not even values measured in real time. So the problem somewhere in the accommodation, with sub - VI. How it can be solved? How can I get real host VI with the moving average value of Subvi update running time?

  Thank you.

  Your problem is that you have a loop that runs until you press the Stop button inside your Subvi.  If you try to use a Global Variable that is functional, you have a few things wrong.

  1. the loop should run only once.  A TRUE to the conditional stay Terminal wire.

  2. the shift register cannot be initialized.  That is how he can keep the old elements in a story.  Use a first call? with a case structure so that you only initialize the table of history inside the loop on the first time the VI is called.

  But if you really want to make your life easier, just use the PtByPt.vi mean.  NOR did all the work for you.

• In time real PXI-1031 does more work with labview. "Not enough disk space to perform the backup.

  The labview real-time project was working until a few weeks ago and the only error that is displayed on the PXI is this error message.

  "NEITHER Configuration Manager: not enough disk space for the backup" everything before that looks like it starts very well. Recently, I removed the hard drive and remove the 4 GB network log file because it seemed to me that a file of 4 GB on a fat32 file system was probably the cause of the problem. After that it the project worked when I tested it, but others in my lab said it was broken again the next day.

  Any help would be greatly appreciated because I don't know all that equipment.

  I found that I had "reset IP" set to "yes" in the bios that seemed to be causing my problem because I changed it to no and it seems to work perfectly now. Sorry that it took so much time to understand and I feel like a fool.