Using the "back button" update for the LCD screen on the 60 d

Similar Questions

• Back button focus for A6000 does not not for the focus and recompose

  All,

  I don't know if the focus and recompose work for my A6000.

  Here are my settings:

  AF w/shutter OFF

  Pre - AF OFF

  AEL w/shutter OFF

  AF-AEL button on

  My sequence:

  1. press the AEL button to focus on a subject by using the central development area

  2. release the focus of the "back" button

  3 recompose to follow the rule of thirds

  4. press the shutter button to take the picture.

  The subject is not to the point when I recompose.

  However, if I just developed and click on without redial, the subject is net.

  Has anyone tried focus and recompose using A6000? Maybe, I have a faulty camera that I need to send it back to Sony for repair.

  Thank you!

  Hi fxleonardo,

  Welcome to the community of Sony!

  Based on your post, you use the AEL button to lock focus on your subject and then recompose the shot. The rule of thirds, I guess when you crop the picture, you're shooting the subject out of the center of the image. And if yes, then I suggest changing your focus area -wide or area. This lets focus you on the subjects or those who are in a different area on the frame. I also suggest changing the mode of development according to the movement of your subject. It is preferable to use AF - S with the emphasis of the "back" button when your subject is motionless.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Mobile Back Button Support for taskflow

  Hello Experts,

  I create the feature using workflows that contain two pages.

  first page list of employees and see the second their detail.

  then, when the user go to the detail page and he's back button when you press this first page is display

  It works well

  but now I want when the user mobile press button previous when the current page is page details

  It is to open the first page.

  Then it is possible in MAF?

  I also handle back button to exit the application using javascript (coredova)

  If you have maintained mobile ButtonBack through javascript, you can add code to meet your needs below:

  If ($('#detailPg').length) {}

  adf.mf.api.amx.doNavigation ("toFirstPage");

  }

  where detailPg is the id of the component to the page hence ButtonBack is cliked PanelPage.

  and toFirstPage is the result of the case of control flow.

  Kind regards

  Deepak

• Can Qosmio G30-102 - I use it as a HD for my PS3 screen?

  Hello

  I have a Qosmio G30-102 and I wanted to know it would be possible to connect my Playstation 3 via * HDMI *? For the moment I can use only cables AV that's really fustrating. If I can use the laptop as screen for my PS3, using the HDMI cable inform me please how to do that because I tried all methods I can think.

  Thank you

  MB

  Hello!

  Sorry, buddy, but this is not possible.
  You can use t as the screen of the laptop as a monitor. The laptop doesn't have a video input port, there is only for video output ports. This is the reason for this.

  So if you want a HD screen for your PS3, you will have to buy a monitor only. The laptop can be used for this.

  Good bye

• RS 232 codes for LG LCD screen

  Can someone verify that these are the correct hex codes for the LG TV for the DMP?

  On = 6b612030312030310d

  OFF = 6b612030312030300d

  I can't seem to get to work and I am sure that we are using a Null modem cable.

  Thank you!

  I was able to use the built-in controls of the TV for a Cisco 32N display to activate the display on LG and outside.  However, I have no need to create a custom command for switching to and from the HDMI and cable.  Hexagonal orders for those who are below.

  RS232.tx_hex = 6b622030312030300D

  RS232.tx_hex = 6b622030312030320D

  Your orders are similar so I guess they are correct.

  Did you run the "RS-232: supported, non-DMTech display control ' advanced on the DPM before this command task?"

  After execution of the command, executed a status on the DMP in question, look for the lines starting with rs232 and see what the rs232.tx_hex has the value should be your order on little matters whether it worked or not.  I usually copy the result of status in a notebook, easier to look through and you can use the find command.

  Good luck

• Setting the resolution for S1931 LCD screens

  Installed S1931 monitor has a maximum resolution of 1366 X 768 at 60 hz.  My XP system will be higher

  in 1024 X 768.  Image is stretched and round objects are oval.  Is it possible to improve the resolution? Or is it

  not compatible with my computer?

  If you try a DVI cable, then do it without the use of adapters. If your don't have a DVI cable and then try www.pccables.com

• What Adobe CS5 product is used to create buttons/icons for Web pages?

  Hi, I have Adobe Creative Suite CS5 and I want to create a chart "Buttons" to use for my web pages.  How the Creative Suite product is best suited for this?

  Thanks in advance!

  Nancy...  It seems to work.  In fact, I tried something similar and came up with similar results.  I add extra (for testing) and had to top-level menu item increase the "width: 48em" width: 58 em to adapt the additional menu item.  But it seems good.  I'm sure that when I become more familiar with CSS, I'll be able to update these things myself.

  One last question...  When you set the color of the menu items?  I tried to change the color elements for the "buttons" from dark red to something, but has not been able to change.

  Thanks for your help/advice so far that it is greatly appreciated.

  -Jamie

• help my girlfriend has used a feather duster swiffer on my lcd screen and x 51 alienware cases?

  Hi I do not know if this is going to hurt or not, but I came home help on my computer screen lcd and case that I don't know how long she has been doing it but it's going to hurt it or not? I yell at him but I thought I would ask here first of all, I just hope that she suffered from my pc.  I know that static electricity swiffer dusters or something to pick up dust.

  If it hurts it, you would see already. or you reboot.  I found what I think is weird...

  http://www.ehow.com/how_6069558_clean-computer-Swiffer.html

  Generally its output on box and shouldn't be internal but screen parts bad seen static fry a LCD ive just of static shock (work HP screen)

• How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.

  How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.
  I know there is an addon for windows Classic theme, but I need a fix for osx... its very frustrating when you update and things like this change and can be customized to the way we are used to using the browser. his counter intuitive to have the page button refresh so far from the back and home buttons.

  never mind, I found the preferences in the addon manager... Thanks again!

• The back button often responds with a drop down menu of the story rather than simply go back to the previous page. There used to be a small arrow for that, why did you do that?

  The back button often responds with a drop down menu of the story rather than simply go back to the previous page. There used to be a small arrow for that, why did you do that?

  When I left click on the back instead of the browser navigation back button, I go almost every time to get the list of previous browsing history or it will just doing nothing until I click on the new button. The history of combination of button "return" rather than a separate between the historical click of the buttons box is the problem. Combined with my arthritic fingers of aging that is. If I was as fast as I used to be I guess it wouldn't be a problem. I liked the separate history area. This action combination navigation / buttons story scenario is problematic. I'm fairly certain that if I find it quite disturbing to bring to your attention that there are others (old beards) in the same boat I am.

  Thanks for listening
  D

  Use one of the following methods to open the tab history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• I used the Pencil button and now I have a button type of path instead of the regular "BOLD" T (for text boxes). I can't button "BOLD" T back instead, there is a T banked with a line.

  I used the Pencil button and now I have a button type of path instead of the regular "BOLD" T (for text boxes). I can't button "BOLD" T back instead, there is a T banked with a line.

  Opt/alt, click on the type on a path tool.

• Google web toolkit plugin for firefox (1.23) disables the back button of the browser. How do fix us this?

  I have Google Web Toolkit Developer Plugin for firefox (1.23). It worked for me, but I recently discovered that in my browser back button has been disabled. By trial and error, I discovered that it's the GWT developer Plugin that is the culprit. When I disable the plugin, the previous button starts working again. When I re - activate the plugin, the back button stops working. Has anyone else encountered this problem? My firefox is version 19.0. Anyone know what would cause the plugin to start to disable the back button?

  Have you tried to use Firefox 23? This is the version you should be running.

• Use already downloaded updates for the new Win7 installation? __

  Dial-up access to the Internet (no high speed access)
  Windows 7 64 bit
  Microsoft Office 2010 Professional

  Hello:

  It took many extra hours to keep Windows 7 64-bit and Microsoft Office 2010 Professional update through Microsoft Windows Update by using the switched to internet connection.  All updates are up-to-date and kept up-to-date with the dial-up connection.

  Eventually, I'll install cool Windows 7 64-bit with Microsoft Office 2010 Professional on the same computer with the same configuration.

  Problem: Using Microsoft Windows Update to install security and bug fixes after a new installation of Windows 7 64 bit, using a dial-up connection will take days.

  Possible solution: copy all the files in the folder: C:\Windows\SoftwareDistribution\Download to another hard disk, and then copy it to the same place after a new installation of Windows 7 64-bit.

  Then run Windows Update, it will find these files and reinstall will take minutes, instead of hours or days.

  Question:
  (1) Will this work?
  (2) are there other directories on the computer that should be copied to another hard disk, then back to a new installation of 64-bit Windows 7 and Microsoft Office 2010 Professional?  (Microsoft Office will install in the usual way, it's security and fixed bugs via Windows Update, I am referring to).

  Any help is appreciated.

  Thank you

  FYI: All other applications will be installed and updated, if necessary, the usual way.  My question is regarding security and bug fixes for 64-bit Windows 7 and Microsoft Office 2010 Professional by using Microsoft Windows Update.

  To order the DVD:
  http://go.Microsoft.com/fwlink/?LinkId=208642

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• Search for files by using the Start button

  I've lost the ability to search for files by using the Start button.  I can enter a file name, but always get a response "nothing found".  I know I did something back a couple of weeks, but don't know what I did to turn it off. Help!

  Thank you!

  Take a look at my search installation tips.  If you are in these settings, you can make sure search is enabled and if necessary you can use the 'reconstruction' of the for button to rebuild your search system.

  http://Skeene.NET/tech/boost-Windows-search-in-two-steps/

  Also, there is an automated troubleshooting tool that tries to find and fix any problems with your search system.  You can go for it here:

  http://support.Microsoft.com/mats/windows_search/