THE 139 ORDINAL COULD NOT BE LOCATED IN THE DYNAMIC LIBRARY IERTUTIL. DLL ERROR

Similar Questions

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• 7426 ordinal could not be located in the dynamic link library mfc90u.dll

  While installing Samsung Kies, I get following error

  7426 ordinal could not be located in the dynamic link library mfc90u.dll?

  Try to download Visual C++ 2008 SP1 from the link below

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=5582

  I also had the same problem after installing it the ordinal error went over the Kies also updated.

• When you run Formula1 2011, error that says: the 5377 ordinal could not be located in the dynamic link library xlive.dll

  5377 ordinal could not be located in the dynamic link library xlive.dll?
  shows it is when I opened formula1 2011 'the game '.
  and I have already install game for windows, please help me I did every thing but the problem is still :(

  original title: the 5377 ordinal could not be located in the dynamic link library xlive.dll

  Try to update your MICROSOFT GAMES FOR WINDOWS LIVE, simply open e it update automatically and after the game running perfectly
  Good luck

• The 62 ordinal not found in the dynamic library CSCDLL.dll

  I get this message every time I open adobe acrobat: the 62 ordinal could not be located in the dynamic link library cscdll.dll. I am running Windows Vista Home Premium SP2 32-bit on an HP desktop. I get a message for a few months. Made sure that Windows and Acrobat is up-to-date.

  Hi BP69,

  ·         When the issue occurred?

  Follow these steps and see if it resolves your problem:

  Method 1:

  Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

  The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

  So if you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

  Method 2:

  Scan your computer for viruses using your antivirus software or online a scanner to flush out them (as appropriate).

  http://OneCare.live.com/site/en-us/default.htm?keyword=scannerhome

  Method 3:

  Start your machine in "safe mode with network" and check if the problem persists.

  Safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 4: I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  Here's a quick fix, do not guarantee to fix but it's worth it.

  Look for your operating system for dbghelp.dll drive. Check the advanced options, search records system, search for hidden files and folders, and search subfolders. Close programs as much as possible. Make sure the results show one in Windows/system32 and other in Windows\system32\dllcache. Right-click on the Windows /system32 and delete it. Wait a few seconds and the supplementary search. You should see it was added back in the dllcache folder and we're in recycler as the image below...

  NOTE: My Windows is under WINNT. Yours is probably Windows.
  

  Restart the computer and see if the problem goes away.

• Could not load the turbo tax software & this message "the EncodePointer point procedure entry is not found in the dynamic library KERNELL32.dll.

  Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll.     can someone tell me how to solve this problem?

  I have windows xp 2002 Service Pack 2

  Hi henryjeshom,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the application of Turbo tax.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem persists, contact support for Turbo tax for more help and information.

  http://TurboTax.Intuit.com/support/

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "SymSetSymWithAddr64 not found in the dynamic library DBGHELP.dll.

  Hello

  Recently, whenever I start up my office, I get the message «SymSetSymWithAddr64» found in the dynamic library DBGHELP.dll  Please advise?

  What do you mean by "old in sys32 dbghelp.dll?

• I am unable to connect to the internet, library MSOERT2.dll error.

  original title: library MSOERT2.dll.

  The procedure entry point CreateInfoWindow be found in the dynamic library MSOERT2.dll. It's the message, it does not allow me to coonect to the internet.

  See www.oehelp.com/OETips.aspx#7 try to delete folders.dbx and see if that fixes the problem.

  Steve

• 5372 ordinal could not be located in the dynamic link library xlive.dll.

  Hi how are you?

  When I try to open a game, he says ordinal .the 5372 could not be located in the dynamic link library xlive.dll.

  Please help me solve this problem & thank you.

  Kind regards.

  Hello

  1. what game you try to play?

  2. were you able to play this game before?

  3. did you of recent changes to the computer?

  This problem occurs especially if the Live is not updated on the system, I suggest you download the latest version of windows live update from the link below and check if you are able to play the game or not.

  http://www.Microsoft.com/games/en-us/aboutGFW/pages/gfw3intro.aspx

  I also suggest that you send your query in the forums of Games for Windows Live for help.

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  http://forums.gamesforwindows.com/search/searchresults.aspx?q=dynamic+link+library+xlive.dll

  Hope this information is useful.

• the 318 ordinal could not be located in the dynamic link library iertutil.dll

  When you try to run programs system says 'the 318 ordinal not found in the dynamic link library iertutil.dll ".

  Hello

  1. When exactly do you get this error message?
  2. What is the accurate and complete error message?
  3. Remember to make changes to the computer recently?
  Method 1: Checking the file system (CFS):
  
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929833
  
  Method 2: Check the issue in Cleanboot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article...
  I hope this helps.

• Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

  Original title: error Ordinal 62
  I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

  Hello

   

  You can try the following steps and check.

   

  Method 1:

  Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

  The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

  If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also check the following thread link and check.

  WARNING 62 Ordinal not found in cscdll.dll

• the 344 ordinal could not be located in the dynamic link library comctl32.dll

  It is with windows XP give it this message and also my wireless does not work.

  I don't know how to solve.

  Hello AliSyaerGizabi,

  As Jose pointed out in the thread above, all information of additional system, you can provide would be beneficial.  What is the make and model of your computer, and the system specifications?   Also, when you receive the above error?

  If you do not have a Dell PC, please visit the link below.  Did you do updates recently regarding your wireless network software?

  Dell forums:

  344 ordinal is not found in the COMCTL32.dll dynamic link library

  http://en.community.Dell.com/support-forums/virus-spyware/f/3522/p/19247943/19393689.aspx#19393689

• The 840 Ordinal could not be located in the iertutil.dll of dynamic library (on the top - wruninstall.exe - Ordinal not found

  I get these messages every time that I boot because is similar, in that I do not copy the other.  A registry cleaner moved the wrong files?

  Hello!

  You have made any changes on your computer recently? The error message you get is caused by the installer of Webroot. It is usually caused by a program or software that has been uninstalled, but some of the components are always there to look for the program and give this error.

  We suggest that you perform a cleanboot to isolate which program or software that causes this problem. To do this, please refer to this link: How to perform a clean boot in Windows.

  Keep us informed.