The 62 ordinal not found in the dynamic library CSCDLL.dll
I get this message every time I open adobe acrobat: the 62 ordinal could not be located in the dynamic link library cscdll.dll. I am running Windows Vista Home Premium SP2 32-bit on an HP desktop. I get a message for a few months. Made sure that Windows and Acrobat is up-to-date.
Hi BP69,
· When the issue occurred?
Follow these steps and see if it resolves your problem:
Method 1:
Check if there is a cscui.dll C:\Windows\SysWOW64 folder.
The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.
So if you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.
Method 2:
Scan your computer for viruses using your antivirus software or online a scanner to flush out them (as appropriate).
http://OneCare.live.com/site/en-us/default.htm?keyword=scannerhome
Method 3:
Start your machine in "safe mode with network" and check if the problem persists.
Safe mode with networking
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 4: I recommend you perform the clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
Tags: Windows
Similar Questions
-
Original title: error Ordinal 62
I received the following error sporadically when I try the accounting version of Quickbooks 2012. Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop. Help, please. "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.Hello
You can try the following steps and check.
Method 1:
Check if there is a cscui.dll C:\Windows\SysWOW64 folder.
The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.
If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.
Method 2:
You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.
For more information, you can consult the following link.
Method 3:
You can also perform a clean boot and check.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
You can also check the following thread link and check.
-
the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll
Here's a quick fix, do not guarantee to fix but it's worth it.
Look for your operating system for dbghelp.dll drive. Check the advanced options, search records system, search for hidden files and folders, and search subfolders. Close programs as much as possible. Make sure the results show one in Windows/system32 and other in Windows\system32\dllcache. Right-click on the Windows /system32 and delete it. Wait a few seconds and the supplementary search. You should see it was added back in the dllcache folder and we're in recycler as the image below...
NOTE: My Windows is under WINNT. Yours is probably Windows.
Restart the computer and see if the problem goes away.
-
Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll. can someone tell me how to solve this problem?
I have windows xp 2002 Service Pack 2
Hi henryjeshom,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Uninstall and reinstall the application of Turbo tax.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
If the problem persists, contact support for Turbo tax for more help and information.
-
Hi all
I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...
They read as follows:
NtrigApplet - unable to connect to the driver: failure to open the device
TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll
CAN SOMEONE PLEASE HELP?
THANK U :)Hi the apprentice 85,
Remember to make changes to the computer before that happened?
Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question
Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Step 2: Put the computer to boot to determine which program is causing the problem
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
"SymSetSymWithAddr64 not found in the dynamic library DBGHELP.dll.
Hello
Recently, whenever I start up my office, I get the message «SymSetSymWithAddr64» found in the dynamic library DBGHELP.dll Please advise?What do you mean by "old in sys32 dbghelp.dll?
-
Original title: Point of entry not found
I'm trying to run an old program, Manufacturer of T-Shirt Hanesand get the error, "the entry point of procedure SUnMapLS_IP-EBP_28 not found in KERNEL32.dll dynamic link library.
I'm running Vista 32 bit.
Any help would be greatly appreciated.Hello
1 see if that helps you.
Right-click on the setup.exe > and then select run as administrator to install it.
2. ask the manufacturer to program if it is Vista Compatible.
We can not help you with that that Microsoft no longer has the link Vista Compatibility Center available.
3. If the program is not Compatible Vista, install in Windows Compatibility Mode
"Using Windows 7 or Vista Compatibility Mode.
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
See you soon.
-
Adobe photoshop cs4 with 3d invigorator plugin zexworks
Hi brush jamie.
Welcome to the Microsoft Answers site!
You may need to contact the Support from Adobe to see if they have a fix for it. Follow the link below the disclaimer to access using Adobe:
Hope this information was useful.
ConcerningVarun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us
know what you think.
NOT MS. LINK:
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. -
Hello
My computer shows the message above to start...
Pleaseadvise I must dotorectify the error...
SQlite is not a Microsoft program.
It is used by other programs such as Firefox and iTunes.
You should be able to determine which program is causing the error by disabling the Start Up items unit you no longer receive the message. Use WIndows Defender to disable start-up programs: http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts
If your antivirus to stop Windows Defender running, proceed to step 4 of this article: http://support.microsoft.com/kb/929135
The most likely explanation is a program from Apple. This thread can give you the solution:
-
I am unable to connect to the internet, library MSOERT2.dll error.
original title: library MSOERT2.dll.The procedure entry point CreateInfoWindow be found in the dynamic library MSOERT2.dll. It's the message, it does not allow me to coonect to the internet.
See www.oehelp.com/OETips.aspx#7 try to delete folders.dbx and see if that fixes the problem.
Steve
-
McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please[Moved from comments]
Hey Carol,.
It would help if you could answer these questions.
-What version of Windows is installed on the computer?
-What antivirus software do you have on the computer?
-When you get this error? It is when the computer starts for the first time?Here are a few troubleshooting steps that you can try to get the matter sorted.
First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is
used by Mcafee and could be the reason for the error.
Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner
Make sure that the computer is virus-free.
Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode
Note: the steps mentioned in the link applies to Windows vista and Windows 7.
Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Let us know the results.
-
I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.
I thought somehow it may relate to a recent update that has been accepted for Skype on my system. So I uninstalled Skype. Attempts to reinstall Skype have failed. the installed app, but I cannot arrive at a login screen. Instead of the normal Skype window, I have just the bottom of loading in a web browser.
I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):
"Method 1:
To resolve this problem in Internet Explorer, follow these steps:
a. Quit all programs that are running.
b. Click Start and then click Run.
c. type regsvr32 urlmon.dll, and then click OK.
d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.
('DllRegisterServer in urlmon.dll' received successful)
If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):
· Shdocvw.dll (failed)
· Actxprxy.dll (failed)
· Oleaut32.dll (failed)
· Mshtml.dll (received no response)
· Browseui.dll (failed)
· Shell32.dll (managed)
Method (step 2):
I suggest you to start in safe mode and test the question.
Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
Method (step 3):
I suggest you perform a SFC Scan and check if it helps.
The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833
(SFC Scan completed successfully)
Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"
DavidMCandy suggested the user a list of the URLMON. Dll on the system. I did as well. See the file on my Onedrive to
http://1drv.Ms/11PQ3dm
I hope this will help you to find me a solution to my problem.
First of all lets run a startup repair.
This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.
After return from the logs generated.
Startup Repair
If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].
In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.
Select the Startup Repair tool.
Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.
To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.
Select command prompt.
Type
type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more
More details about the error
To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 2and it will sayThe system cannot find the specified file.Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.
Look for the lines saying error or failed.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems
http://support.Microsoft.com/mats/windows_update/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
del %SYSTEMROOT%\Logs\CBS\CBS.log
Install the update
Notepad %SYSTEMROOT%\Logs\CBS\CBS.log
Which helps with Windows Update.The system update tool
Also run the system update readiness tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Repair and defragment the database
Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).SC stop wuauservstop bits SCSC stop cryptsvcEsentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
SC start cryptsvcSC start bitsSC start wuauservDifficulty of the ServiceDownload wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.ResetClick Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.SC start DCOMLaunchSC start RpcSsstart wuauserv sc config = autoSC start wuauservdeparture from trustedinstaller sc config = requestSC start trustedinstallerSC config COMSysApp start = demandSC start COMSysAppSC config BITS start = demandSC start BITSstart slsvc sc config = autoSC start slsvcSC config start = auto EventLogSC start EventLog
--More details about the error
To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 2and it will sayThe system cannot find the specified file.Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.
Look for the lines saying error or failed.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems
http://support.Microsoft.com/mats/windows_update/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
del %SYSTEMROOT%\Logs\CBS\CBS.log
Install the update
Notepad %SYSTEMROOT%\Logs\CBS\CBS.log
Which helps with Windows Update.The system update tool
Also run the system update readiness tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Repair and defragment the database
Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).SC stop wuauservstop bits SCSC stop cryptsvcEsentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
SC start cryptsvcSC start bitsSC start wuauservDifficulty of the ServiceDownload wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.ResetClick Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.SC start DCOMLaunchSC start RpcSsstart wuauserv sc config = autoSC start wuauservdeparture from trustedinstaller sc config = requestSC start trustedinstallerSC config COMSysApp start = demandSC start COMSysAppSC config BITS start = demandSC start BITSstart slsvc sc config = autoSC start slsvcSC config start = auto EventLogSC start EventLog
--More details about the error
To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 2and it will sayThe system cannot find the specified file.Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.
Look for the lines saying error or failed.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems
http://support.Microsoft.com/mats/windows_update/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
del %SYSTEMROOT%\Logs\CBS\CBS.log
Install the update
Notepad %SYSTEMROOT%\Logs\CBS\CBS.log
Which helps with Windows Update.The system update tool
Also run the system update readiness tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Repair and defragment the database
Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).SC stop wuauservstop bits SCSC stop cryptsvcEsentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
SC start cryptsvcSC start bitsSC start wuauservDifficulty of the ServiceDownload wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.ResetClick Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.SC start DCOMLaunchSC start RpcSsstart wuauserv sc config = autoSC start wuauservdeparture from trustedinstaller sc config = requestSC start trustedinstallerSC config COMSysApp start = demandSC start COMSysAppSC config BITS start = demandSC start BITSstart slsvc sc config = autoSC start slsvcSC config start = auto EventLogSC start EventLog
--More details about the error
To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 2and it will sayThe system cannot find the specified file.Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.
Look for the lines saying error or failed.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems
http://support.Microsoft.com/mats/windows_update/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
del %SYSTEMROOT%\Logs\CBS\CBS.log
Install the update
Notepad %SYSTEMROOT%\Logs\CBS\CBS.log
Which helps with Windows Update.The system update tool
Also run the system update readiness tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Repair and defragment the database
Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).SC stop wuauservstop bits SCSC stop cryptsvcEsentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb
Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
SC start cryptsvcSC start bitsSC start wuauservDifficulty of the ServiceDownload wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.ResetClick Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.SC start DCOMLaunchSC start RpcSsstart wuauserv sc config = autoSC start wuauservdeparture from trustedinstaller sc config = requestSC start trustedinstallerSC config COMSysApp start = demandSC start COMSysAppSC config BITS start = demandSC start BITSstart slsvc sc config = autoSC start slsvcSC config start = auto EventLogSC start EventLog
-- -
When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library. Any ideas on how to solve this problem. Have Windows Vista. Thank you.
original title: problem opening Adobe pdf.Hi Gary,.
Are you facing this issue only when you open pdf files?
Method 1:
You can try uninstalling and reinstalling Adobe software and check if it helps.
Method 2:
You also try to run the system restore.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following links:
System Restore: frequently asked questions
Hope this information is useful.
-
The 12404 ordinal not found in the dynamic link library mfc90u.dll.
I get this error when trying to open Samsung Kies 3 after the new facility:
The 12404 ordinal not found in the dynamic link library mfc90u.dll.
This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years. However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.
I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:
-C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)
-C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)
-C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)
-C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)
The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++). The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.
If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location? If so, where is this place?
Other thoughts on how to fix this?
Windows: Windows 7 Enterprise Edition, Service Pack 1
Kies 3 Installer: Version 3.2.14083.9
I get this error when trying to open Samsung Kies 3 after the new facility:
The 12404 ordinal not found in the dynamic link library mfc90u.dll.
This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years. However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.
I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:
-C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)
-C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)
-C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)
-C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)
The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++). The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.
If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location? If so, where is this place?
Other thoughts on how to fix this?
Windows: Windows 7 Enterprise Edition, Service Pack 1
Kies 3 Installer: Version 3.2.14083.9
Installation under pakage will solve the problem
http://www.Microsoft.com/downloads/details.aspx?FamilyId=d5692ce4-Adad-4000-abfe-64628a267ef0&displaylang=en
-
Get the 7425 ordinal not found in dynamic link library...
After having downloaded the Samsung Kies program, I get the message in the title everytime I open the program.
How can I get this 7425 ordinal & how is it important for the Kies program?
The. DLL (or Dynamic Link Library) files are program files common to a variety of programs and processes. Basically, instead of duplicating the same routine in many different places, the calling process is said "" If you need it, get it. "" DLL". The location in the. DLL is called ordinal so many common routines can be stuffed into one. DLL. the ordinal numbers and their respective programs are identified by the system via registration of the. DLL.
Different versions of a. DLL can have different combinations of common routines; Some may be the same, and some may be different, added or deleted. Since you have decided not to include the actual name of the. DLL in question, it is impossible to tell if you are talking about one. DLL that came with the Samsung Kies program or if the Samsung Kies program tries to access a Windows System. DLL that is native to your operating system Windows 7.
At this point, my best advice would be first uninstall the program Samsung Kies, and then see the Samsung support site and get the copy more recent which is available and designed for your particular Windows version. The support site must list the viable O/S for the program on the download page. Install the program and your "7425 ordinal not found" problem should be solved if the program is compatible with Windows 7.
A few tips on achieving a problem-free installation:
- Consider the start in a "clean boot" environment to ensure that no other program interferes with the installation process.
How to perform a clean boot for a problem in Windows
Vista, Windows 7 or Windows 8 - If you follow the first step, after downloading the program, disable your anti-virus for the short time that you install the program. An overzealous anti-virus can often interfere with the installation and registration of .dll files.
- Consider the start in a "clean boot" environment to ensure that no other program interferes with the installation process.
Maybe you are looking for
-
Satellite Pro A660 - wireless network adapter issues
Hi guys hope you can help! I have a Satellite Pro A660 - 11 M Windows 7-64 bit The wireless network adapter does not work... I tried to reinstall the bios and the driver wireless. The wireless button is lit to Yes as the key Fn + F8 doesn't show not
-
How do you remove Trojan horse from the Windows\system\svchost.exe file located? I worked on this problem for 5 days. I've tried everything except wipe the hard drive completely and starting over. Windows xp pro sp3 I bought a new diagnosis program a
-
I have a set of logitech speakers and a subwoofer that I use on my netbook, but when I plug the charger to recharge the battery, the sound distorts seriously which means I can listen only as long as the battery, I sent l; ogitech but they said it was
-
L2Z89PA: Video Driver for laptop Hp 15-r250tu
Hello I just bought this new laptop and installed Windows 7... Unfortunately I don't get the video driver for this product. Not even in the section Drivers from Hp... Feel so helpless... What I have is the standard vga driver now... With this driver,
-
I changed my IP address subnet mask default gateway so that I can manually connect through the web page of the router, but I don, t know what to put for DNS, I read to go to the router page and click on status it shows as I can of 0.0.0.0, t get to t