the 32-bit version of the plugin does not work after filterSelectorParameters

Similar Questions

• I bought a new camera. I use photoshop cs5.   I need to install a plugin of ACR.  The plugin does not work?

  Just bought a new camera.  I use Photoshop cs5.  I had to install an ACR plugin I made. I did the installation but the plugin will not work.

  Devices supported by Camera Raw

  Applications of camera Raw compatible Adobe

  Troubleshooting of Camera Raw | Photoshop, Photoshop Elements

  Mylenium

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• Highlight the line does not work after dynamic refresh

  Hello

  
  

  Request Express 4.2.1.00.08

  
  

  Hoping someone can help with this. I have a report (list of loans for a person) who gets refreshed dynamically when the account number is changed. The loan id column is a link when you click fires a dynamic action that uses JavaScript to highlight the current line

  $('.highlight-row').removeClass ('point culminating-row');

  $(this.triggeringElement) .parent () .parent () .children () .addClass ('point culminating-row');

  It works fine first time around, but if the loans area is updated the javascript does not work anymore and the current line is not highlighted.

  Thank you

  
  

  Neal
  

  
  

  
  

  Hello

  What is the scope of the event?

  It must be dynamic.

  You can create a new DA the event which is:

  After Refresh.

  Selection type: report

• Rotate the Plugin does not work in Oracle Apex 5

  Hi all

  Now I am developing an application using Oracle Apex 5.

  I have improved my request of Oracle Apex 4.2 to 5.

  I used the plugin called PivotTable. Its works fine in Oracle Apex 4.2, but does not work in Oracle Apex 5.

  I just downloaded the plugin from the link below

  https://code.Google.com/p/PLSQL-utils/downloads/detail?name=region_type_plugin_muledev_pivot_region.SQL

  How to use this plugin in my Oracle Apex 5 application?

  Thank you

  Su.GI

  Su.GI wrote:

  Now I am developing an application using Oracle Apex 5.

  I have improved my request of Oracle Apex 4.2 to 5.

  I used the plugin called PivotTable. Its works fine in Oracle Apex 4.2, but does not work in Oracle Apex 5.

  I just downloaded the plugin from the link below

  https://code.Google.com/p/PLSQL-utils/downloads/detail?name=region_type_plugin_muledev_pivot_region.SQL

  How to use this plugin in my Oracle Apex 5 application?

  Interaction with the rendering plugin 5.0 of APEX generates hundreds of errors in JavaScript (check the browser console) of the jquery.ui.sortable.min.js library included with the plug-in, indicating an incompatibility with versions 5.0 of the APEX of the other libraries.

  The plugin code includes a comment about this library:

    -- note: this file is also found in /i/libraries/jquery-ui/1.8.22/ui/minified/ but is not included by default by Apex
    apex_javascript.add_library (
      p_name      => 'jquery.ui.sortable.min',
      p_directory => p_plugin.file_prefix);
  

  APEX 5.0 is a newer version of the library of /i/libraries/jquery-ui/1.10.4/ui/minified/jquery.ui.sortable.min.js and the plugin works when it is used with it.

  Go to the components shared > Plug-ins > PivotTable, delete the original jquery.ui.sortable.min.js of the files section and download the 1.10.4 version instead.

• the plugin does not work in drive

  I compiled the project successfully, and I got the DdeServer.api file.

  He now works in the observer, but it does not work in the drive.  Why?

  What are the differences between support Viewer and reader support?

  OK - our samples in the SDK are for Acrobat NOT to the reader.  No attempt

  has made to build them for the reader.  If an API is not available for the reader,

  You can not use it there.

  You can do what you want - but I always recommend to people that they

  try to acquire the license FIRST because if Adobe does not give you the

  License (this is NOT a given that we do!) then all of your work has been

  wasted.  Better to know in advance if you will approve.

  No, a plugin with IKLA will be completely ignored by player - it won't be the same

  See or try to load it.

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Satellite C50D-B-120 - buttons on the touchpad does not work after upgrade to win 10

  I just bought this new laptop. I have updated to Windows 8 Windows 10. Everything worked fine before the update. I am now active on Windows 10 and the mouse pad does not work. Initially, the entire mouse pad not working, I couldn't even move the mouse on the screen. I had a play around in the settings and have managed to get the work of the mouse, but now the button of mosuepad. I searched around the computer for the settings to solve this problem, but I had no luck.

  Please any help would be great, begin teaching and could do with getting this issue sorted.

  Thank you!

  You need to uninstall the driver for the touchpad (MOMENTUM or Synaptics)
  After that, restart the laptop...

  You can also try to update the driver in Device Manager... but the unit must be connected to the internet...

• Satellite A200 - 1 M 7: the sound does not work after the downgrade to XP

  Hello!

  As in the topic I have a problem with my sound card - it simply does not work under Win Xp (under Vista everything worked).

  In Device Manager I have two 'points of inquiry:
  -Controller\ PCI memory
  -Unknown device
  I assumed that the unknown device is my sound card, but still can't make it work :/

  I've already upgraded the bios and install page of toshiba Realtek drivers.

  Really need help.

  Adrian

  Hello

  No sound after installing XP operating system. What to say man I searched here in the forum similar threads and it seems that it is a common problem.

  But you worry about don t; I think that I found the key ;)
  After installing win XP, you must update the latter State. Install all the patches and hotfixes provided by Microsoft. You must use the website to update Ms. The tool on this page checks the system and selects all necessary updates!

  Very important are the patches; KB888111 and KB835221
  These hotfixes must be installed before installing the sound card driver.

  The Realtek sound card driver can be downloaded from Toshiba or on the official website of Relatek page.

  By the way; It is very important to install drivers in the correct order. On the Toshiba page, you will find the installation instructions. So please follow the guidelines mentioned in this doc.

  concerning

• Equium M50-235: the keyboard does not work after upgrde memory

  I just did an upgrade memory on my laptop using the second slot located under the keyboard.
  However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
  Reconnect and fixed with the clip, the keyboard no longer works.

  Is there a service manual I can get hold of someone know what could be the cause of the problem?

  Thank you!

  Hello

  First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.