the 4029 counter circuit... Help... F1... F1...!

Similar Questions

• Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Hi rogerusa,

  1. you are running Windows 7 on the computer?

  The description of your problem, we understand that you try to install the game and it does not load.

  Check if you can install the game in clean boot or by turning off all non-Microsoft programs. To do this, follow these steps.
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. right-click on the file to install game and click Run as administrator. Install the game and check the result.
  d. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Several networks of power line can exist simultaneously in the same electrical circuit?

  Several networks of power line can exist simultaneously in the same electrical circuit?

  Thank you

  Yes, as long as you change the encryption keys can have simultaneous powerline of the networks.

  If two units with the encryption key "HomeplugAV" does not connect with two other units with the encryption key 'HomeplugAV2', but the two pairs will work independent of each other.

  Hope this helps

• by the way the variable counter between the loops

  I have a question about the passage of a variable counter between different events / while loops and seen an increase in value regardless of the loop is initiated.

  The fundamental problem is that I write file names unique to data collected on a spectrometer, and I would value at the end of the name of the file to increment every time that I collect the data. There are several different ways that I can collect the data, and I'd like the counter to increment when the collections is triggered. The attachment shows essentially what I'm trying to accomplish. Represent it buttons collect two different types of data I collect my instrument, but the counter variable is not passed correctly between the two loops. Is it possible that I can get the incrementing counter so that the two loops read the same value of counter?

  Thanks for your help.

  MICAH

  I can't look at your code since I'm on a phone. But you should really only have / need a structure of the event in a vi. The only exception I can think of is one to manage the events of the user and the other for GUI events. But even in this case there is no reason that I can think to need two.

• The Performance counter requested is not a custom counter, it needs to be initialized read-only.

  I use SAGE ACt! database and I get this error message after loading.  The Performance counter requested is not a custom counter, it needs to be initialized read-only.

  Does anyone know how to remedy this?  I talked to the WISE and they say it's a problem of Windows registry, but I don't have the knowledge to deal with this.

  Hello

  Thanks for posting your query in Microsoft Community!

  Can I know what Windows operating system do you use?

  I would like you see below and check if that helps.

  Error message "Performance counter is not a custom counter, it needs to be initialized in ReadOnly" when you run Microsoft Dynamics CRM 4.0

  http://support.Microsoft.com/kb/958377#appliesTo

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• Problem in the stimulation of the op-amp circuit used to produce sinusoidal signal

  The President complied,

  I'm trying to stimulate these circuits in Multisim. .but I don't get the good output.in oscilloscope.../technotrix oscilloscope.

  On the contarary when I used a bread-Board & checked the result... I was getting sinusoidal output...

  Please help me about the same...

  I guess that stimulate the op-amp circuits is really hard in Multisim. !!

  Please find the attachment.

  NUPSSHAH,

  I took a quick look at these circuits.

  In "wave sine generation.ms12" U1A, you pin 4 (V +) cable to Gnd and PIN 11 cable to + 6V (while all the other operational amplifiers are opposed).  Is - this intentional or your circuit isn't correct?

  Also, these seem to be the variety of resonance (where the change of phase of 180 is important) and can be difficult for any Simulator SPICE simulate, especially if the conditions of marketing and the stage (transfer function) is not perfectly modeled.    I think this might be similar to a situation where in SPICES you need to 'launch' resonant Crystal, that is to say - you'll need to give it an initial energy and eventually it will start to vibrate.   (See here: http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/Crystal-Oscillator/td-p/1109026)

  Usually with a Crystal, the model is relatively simple.   The difficulty with an op amp, is that if you give him too much energy (in order to get to the ramp until the resonance quickly), simulation can go non-linear because of the cutting/saturation and the global simulation at this time is perhaps not reliable.

  Please check your circuit again, but maybe you can try to use as a source of thermal noise + interactive SPDT switch to give it enough starting (and put it out if enough energy is applied)?  Just an idea...  If you see no brake once the source is turned off, the phase is probably off.

  Database-> Signal_Voltage_Sources-> THERMAL_NOISE

  Pat Noonan

  National Instruments

• How can I get the shutter count for my Canon 7 d Mark II using Windows XP?

  How can I get the shutter count for my Canon 7 d Mark II using Windows XP? I have been looking for many places and make downloads of files, but I can't seem to find anything. I am wary of downloading software that I know nothing. Any help is greatly appreciated.

  Hi, I paid only $2.99 acquired program namely the supreme court on a 7 d Mark 2

  Search: direstudio.com to find out.

• The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

  The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

  Help! Thank you

  Lisa

  Hello

  -No, I don't have third-party backup programs installed.

  -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.

  Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.

  I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.

  Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...

• Get the select count (*) including zero '0 '.

  Hi gurus,
  
  I have the problem here, I have this request:
  
  SELECT COUNT (t.column1) AS mycount.
  To_char(t.CREATION_DATE,'MONTH') AS themonth
  Table 1 t
  WHERE the t.creation_date BETWEEN TO_DATE('01/01/2011') AND TO_DATE('09/07/2011') AND t.column1 > 0
  GROUP OF TO_CHAR (t.creation_date, 'MONTH')
  ORDER BY TO_DATE (TO_CHAR (t.creation_date, 'MONTH'), 'MONTH')
  
  then I get this query result
  
  
  MYCOUNT. THEMONTH
  -------------- ----------------
  JANUARY | 3
  MARCH | 6
  APRIL | 5
  CAN | 9
  JULY | 2
  
  
  and I need like this
  MYCOUNT. THEMONTH
  -------------- ----------------
  JANUARY | 3
  FEBRUARY | 0
  MARCH | 6
  APRIL | 5
  CAN | 9
  JUNE | 0
  JULY | 2
  
  what I am doing wrong? or what I can add to the code? Please, I hope you can help with this one.
  
  
  Best regards
  Mentor

  Mentor wrote:

  Hey and when I don't have a date range and did well id how can I get the result?

  SELECT  NVL(COUNT(column1),0) mycount,
          TO_CHAR(TRUNC(creation_date,'MM'),'MONTH') themonth
    FROM  (
            SELECT  column1,
                    creation_date
              FROM  table1
              WHERE column_id IN (2,3,12,67,49,182)
                AND column1 > 0
           UNION ALL
            SELECT  NULL column1,
                    ADD_MONTHS(min_creation_date,LEVEL - 1) creation_date
              FROM  (
                     SELECT  TRUNC(MIN(creation_date),'MM') min_creation_date,
                             TRUNC(MAX(creation_date),'MM') max_creation_date
                       FROM  table1
                       WHERE column_id IN (2,3,12,67,49,182)
                         AND column1 > 0
                    )
              CONNECT BY ADD_MONTHS(min_creation_date,LEVEL - 1) <= LAST_DAY(max_creation_date)
          )
    GROUP BY TRUNC(creation_date,'MM')
    ORDER BY TRUNC(creation_date,'MM')
  / 
  

  >

  and another question, how can I get the two counts of the same column where the condition its diferent?

  SELECT  NVL(COUNT(CASE column2 WHEN 'JOHN' THEN 1 END),0) count_a,
          NVL(COUNT(CASE column2 WHEN 'MICHAEL' THEN 1 END),0) count_b,
          TO_CHAR(TRUNC(creation_date,'MM'),'MONTH') themonth
    FROM  (
            SELECT  column2,
                    creation_date
              FROM  table1
              WHERE column2 IN ('JOHN','MICHAEL')
           UNION ALL
            SELECT  NULL column2,
                    ADD_MONTHS(min_creation_date,LEVEL - 1) creation_date
              FROM  (
                     SELECT  TRUNC(MIN(creation_date),'MM') min_creation_date,
                             TRUNC(MAX(creation_date),'MM') max_creation_date
                       FROM  table1
                       WHERE column2 IN ('JOHN','MICHAEL')
                    )
              CONNECT BY ADD_MONTHS(min_creation_date,LEVEL - 1) <= LAST_DAY(max_creation_date)
          )
    GROUP BY TRUNC(creation_date,'MM')
    ORDER BY TRUNC(creation_date,'MM')
  / 
  

  SY.

• The Segment count problem

  Hi guys,.
  
  I have a problem with the segment count.
  
  For example I want to count the customer on the fact table to ANSWER, one answer per channel and answer MAIL dates > 2009-03-11.
  
  On the segmentation module, I create a segment:
  
  Start with RESPONSE_METOD = "E-MAIL address" (customer account 107)
  Keep the RESPONSE DATE > 11/03/2009 (customer count 12)
  
  TOTAL SEGMENT 12 customer. It is wrong because the correct answer is 7 client.
  
  Instead
  
  If I create one "level of segmentation", as follows, it is working:
  
  Start with RESPONSE_METOD = "E-MAIL address" and the RESPONSE DATE > 11/03/2009 (TOTAL 7 customer COUNT)
  
  How is possible? I'm trying to generate the log file to find the query but I get the error "no paper found" (SPR file I updated logging level 2 for the user)
  
  Direct them best for a few suggestion
  
  Good bye

  Hello user.

  Try to set the log level = 7 for the user to the RPD, then save the RPD, clear cache in the RPD and the presentation of the services and run the query again. This should allow that you go to see the log in "settings > Administration > manage Sessions.

  Once you do that, maybe you can paste the log in your next post and we can better address the question?

  I hope this helps and please give points if you found it useful!

  Kind regards
  Jason

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• How to stop the pop-up tip help Mozilla

  If the update added a few features which I love but a serious makes me angry because I don't know how to stop it. Mozilla keeps offering suggestions on how use the web with annoying help tip popups blocking my screen. He says things like "press Ctrl + W to close tabs. It is faster' and ' to start private browsing...'

  It is SO annoying and I can't find a way to stop it. This isn't the first time I used Firefox and I don't need to be told how to use it as if it was my first time. Help, please... I don't want to go to Chrome. x.x

  It is being run by Mozilla experience. That's because at some point you have installed the test pilot add-on or used a beta version of Firefox and in doing so registered to help Mozilla to test the new features.

  If you want to remove it, feel free to uninstall the test pilot and the add-on experience. Disable or remove modules

• My Apple Watch doesn't work despite the charge. Need help!

  MY Apple Watch feeds not on despite the load? Need help!

  Have you tried to force the reboot of the Apple Watch?

  Forcing Apple Watch to restart: press and hold the side button and the digital Crown at the same time for at least ten seconds, until the Apple logo appears.

• Corrupt mail? My new gmail address mail went down fine. Then I lost a large part of it in the box in. Sent mail seems to reproduce several times in my project. Also in the trash without my help. Help appreciated. Thank you.

  Corrupt mail?

  My new gmail address mail went down fine. Then I lost a large part of it in the box in.

  Sent mail seems to reproduce several times in my project. Also in the trash without my help. Help appreciated. Thank you.

  Yosemite of OS X running.

  Also went to Applications > utilities, disk utility. and 'Repair permissions' restarted when finished. Don't know if this will help future emails.

  To project e-mails, open the preferences Mail account tab select the account gmail and go to the behaviour of the ball. Uncheck the tab where you will store draft messages on the server.

  Give a little more detail on other issues. For the lost emails, they lack also the site of the gmail webmail?