BEFSR41 help with static IP

Similar Questions

• Help with static IP address for the WRT54GL by EZXS55W

  Hi all!

  I'm having some trouble network at the office and cannot keep close internet for all the world just try a new mode of connection of the cables.

  We recently received a notice on five new static ip addresses for the office, we did turn on DHCP those for a year now.

  We have a basic network requiring no credentials of the modem or connection.

  At this moment we have a network cable straight from the network on the router (WRT54GL) failure. Then, the router is defined in gateway mode and uses one of our static Ip addresses.

  I wanted to connect my server to the same fault, but using the static IP address, so I thought why not do it through a switch.

  So the network failure, I ran the right network cable into the uplink on the switch (EZXS55W) connector and then put the router in port 1 and my server port2. Both connected with the right cables.

  The Internet light on the router does not light and the switch just flicker light now and then.

  Maybe someone here can help me how I should put up to get to the top and running, what do I have to configure something special on the router or maybe somewhere use twisted cables.

  Please I need your help!

  Thanks for the help and you where once there was something wrong along the way.
  I tested my switch before trying this, but apparently it is now broken.
  I borrowed another switch of a friend and everything was up and running in a few seconds.
  So now I just need to buy a new switch and everything will be fine.
  Once agan, thank you...

• Linksys BEFSR41 connection with modem router getting not real internet ip

  Hello, can someone help with this problem. I connected to a modem router linksys BEFSR41 router. But when I watched the status in linksys BEFSR41 router, it gives only an IP from the modem router and no real internet ip address.

  can someone give me an answer.

  Thanks in advance.

  Don't string two routers. Fill the modem/router or don't use the BEF as a router, but only as a simple switch (or replace it with a standard ethernet switch).

• Computers with static IP address, get addresses (169.254) APIPA

  There are several posts on my network configured with static IP addresses. To go to sleep or restart (warm), they will get an APIPA 169.254.x.x. address I found that there are three ways to solve this case temporarily:

  1. Shut the computer down (cold) and back on the power.
  2. Disable and re-enable the adapter.
  3. Disconnect and reconnect the network cable.

  I had some success with affecting the NETWORK 100 Mbit/s/Full Duplex card AND the port of the switch to match. This seems like a solution of cloogy. Updated the drivers of the card toward the newer versions does not help. The problem exists on many brands adapter, including Intel, Broadcom and Marvell. Nothing useful is in the event logs. Our switching infrastructure is Cisco all if it matters.

  Can anyone help?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• 1119: access of nativeWindow property possibly not defined through a reference with static type flash.display:Stage.

  I tried this code:

  http://help.Adobe.com/en_US/AS3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7e08.html

  but it displays error: 1119: access of nativeWindow property possibly not defined through a reference with static type flash.display:Stage.

  package

  {

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  import flash.text.TextField;

  SerializableAttribute public class MinimizeExample extends Sprite

  {

  public void MinimizeExample (): void

  {

  var minTextBtn:TextField = new TextField();

  minTextBtn.x = 10;

  minTextBtn.y = 10;

  minTextBtn.text = "minimize";

  minTextBtn.background = true;

  minTextBtn.border = true;

  minTextBtn.selectable = false;

  addChild (minTextBtn);

  minTextBtn.addEventListener (MouseEvent.CLICK, onMinimize);

  var maxTextBtn:TextField = new TextField();

  maxTextBtn.x = 120;

  maxTextBtn.y = 10;

  maxTextBtn.text = "zoom";

  maxTextBtn.background = true;

  maxTextBtn.border = true;

  maxTextBtn.selectable = false;

  addChild (maxTextBtn);

  maxTextBtn.addEventListener (MouseEvent.CLICK, onMaximize);

  var restoreTextBtn:TextField = new TextField();

  restoreTextBtn.x = 230;

  restoreTextBtn.y = 10;

  restoreTextBtn.text = "restore";

  restoreTextBtn.background = true;

  restoreTextBtn.border = true;

  restoreTextBtn.selectable = false;

  addChild (restoreTextBtn);

  restoreTextBtn.addEventListener (MouseEvent.CLICK, onRestore);

  var closeTextBtn:TextField = new TextField();

  closeTextBtn.x = 340;

  closeTextBtn.y = 10;

  closeTextBtn.text = 'close this window ';

  closeTextBtn.background = true;

  closeTextBtn.border = true;

  closeTextBtn.selectable = false;

  addChild (closeTextBtn);

  closeTextBtn.addEventListener (MouseEvent.CLICK, onCloseWindow);

  }

  function onMinimize(event:MouseEvent):void

  {

  this.stage.nativeWindow.minimize ();

  }

  function onMaximize(event:MouseEvent):void

  {

  this.stage.nativeWindow.maximize ();

  }

  function onRestore(event:MouseEvent):void

  {

  this.stage.nativeWindow.restore ();

  }

  function onCloseWindow(event:MouseEvent):void

  {

  this.stage.nativeWindow.close ();

  }

  }

  }

  You can not force-close a browser with the exception of a window with javascript window.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• help with buttons

  Hello

  IM do a shop in my game and I have a button saying my boat to change his image, but I get this error:

  Scene 1, Layer 'have', frame 3, line 7 1061: call to a Stop method maybe not defined through a reference with static type class.

  and here is the corresponding code:

  Stop();
  import flash.display.MovieClip;
  import flash.events.MouseEvent;

  Alien3.addEventListener (MouseEvent.MOUSE_DOWN, mouse1);
  function mouse1(e:MouseEvent):void {}
  Ship.gotoAndStop (2);
  }

  any help.

  It seems that you have a class named 'Ship' and you try to say this class behaves as a movieclip in your code.  What you probably really want to do, this is something in addition to...

  boat: boat of var = new Ship();

  addChild (ship);

  function mouse1(e:MouseEvent):void {}

  ship.gotoAndStop (2);

  }

• Access to the number of property may not set through a reference with static type...

  Hi all!

  I encounter this problem today... Take a look at the code:

  import com.trick7.effects.TeraFire;

  for (var j: uint = 0; j < 10; j ++) {}

  var fire: TeraFire = new TeraFire();

  Fire.x = j * 40 + 20;

  Fire.y = 100;

  Fire.Number = j; This line is causeing the problem

  addChild (fire);

  fire.buttonMode = true;

  }

  Class TeraFire creates fire particles. Compiler error is:

  Scene 1, Layer 'layer 1', frame 1, line 7.

  1119: access of the number of property may not set through a reference with static type com.trick7.effects:TeraFire.

  Can someone help me find a solution to this problem.

  I can do this 'number' with a clip, but not in this case. What can I do?

  Sorry oops misspelling... I meant fire ['number'] = j;

  The class must also be dynamic for this work, i.e.:

  public dynamic class TeraFire extends MovieClip
  

  (a dynamic class extension is not the class dynamic sub...)

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• Peopleimages property possibly access not defined through a reference with static type class.

  Hello

  I have a custom MXML component called SeeElement.mxml, within this file I defined a VBOX as shown

  SeeElement.mxml
  
  < mx:VBox id = 'personimages' >
  < mx:Label id = "viewname" / >
  < / mx:VBox >

  Now inside another ActionScript file, I try to make visible to false, as shown:
  SeeElement. peopleimages.visible = false;

  I am thie error

  Peopleimages property possibly access not defined through a reference with static type class.

  Please help me solve this problem.

  Thank you.

  inside your "a few other sctionscript the file' you need a reference to the SeeElement object

  var seeElement:SeeElement = new SeeElement();

  Then you can seeElement.personImages.visible = false;

  SeeElement (with a capital S) refers to the class SeeElement and personImages is not a class member variable its an instance member variable

• 1119: access of possibly property indefinite Timer through a reference with static type class

  Hello

  I am trying to create a timer event for delaying the instantiation of my clip on the stage, but I get the error message:

  1119: access of possibly property indefinite Timer through a reference with static type class

  I am confused with how to proceed. I thought that the timer was a term already in the library for AS3, so how can he be undefined? Any help that you could provide to help me understand the problem and how to fix it, would be great.

  Thank you

  Here's a look at my code:

  import flash.display.MovieClip;

  import flash.utils.Timer;

  import flash.events.Event;

  import flash.events.TimerEvent;

  var dripTimer:Timer = new Timer (3000)

  var blood1:MovieClip = new Blood();

  dripTimer.addEventListener (TimerEvent.Timer, bloodDrip)

  dripTimer.start ();

  function bloodDrip(e:TimerEvent):void {}

  trace ("blood flows");

  blood1.x = 300;

  blood1.y = 100;

  addChild (blood1);

  }

  AS3 is case sensitive.

  Thus, the code should be:

  dripTimer.addEventListener (TimerEvent.TIMER, bloodDrip) - upper

• 1119: access of property may be undefined with currentFrameLabel through a reference with static type f

  1119: access of property may be undefined with currentFrameLabel through a reference with static type flash.display:DisplayObject.

  line with the error: if (holder.getChildAt (i).currentFrameLabel.search ("false")! = - 1) {}

  any help?

  Try:

  If (MovieClip (holder.getChildAt (i)).currentFrameLabel.search ("false")! = - 1)

• VO with static values

  I WANT TO CREATE A MESSAGE OF CHOICE WITH STATIC VALUES. FOR THIS I HAVE CREAT VO
  Name: DeviseVO
  attributes: RowKey (primaryKey, number)
  Values (String)
  
  I creat the initialiserDevise() method and call it from the PR
  
  Public Sub initialiserDevise()
  {
  String [] values = {'Dinar', 'Euro', 'Dollar'};
  DeviseVOImpl pervo = getDeviseVO1 ();
  If (Pervo.getFetchedRowCount () == 0)
  {
  for (int i = 0; i < 3; i ++)
  {
  pervo.executeQuery ();
  Bow of row = pervo.createRow ();
  pervo.insertRow (prow);
  Try
  {
  prow.setAttribute ("RowKey", new Number (i));
  prow.setAttribute ("values" [i]);
  pervo.getCurrentRow () .validate ();
  }
  catch (Exception ex)
  {
  pervo.getCurrentRow () .remove ();
  }
  }
  }
  pervo.executeQuery ();
  System.out.println (Pervo.getFetchedRowCount ());
  }
  
  My problem that the list is as empty and the display method 0
  
  Help please
  
  Thank you

  Hello

  This requirement is quite simple that instead of writing code you can write query in English like this

  Select "Dinar" dual union select 'Euro' from dual union select 'Dollar' of the double

  and after that, you need not to run the query on this OAF do by itself, even then I suggest you to create a list of choices for this and then later you want to add the value or delete what can be done without changing the code.

  Hope this will help :)

  Kind regards
  Out Sharma

• Help with error in the Code generated by the WSDL Wizard

  I have generated the code the wizard of webservice and then wrote a simple mxml file to test the code. I get this error:
  
  1061: call to a getClass method maybe not defined through a reference with static type class.
  
  It occurs in the following code:
  
  /**
  * Internal event handler for handling a call to success from the server
  * The result is decoded using schema settings and operation, then the
  * events transmitted the real front that the user works in the application
  * @private
  */
  
  private void processResult(result:Object,wrappedData:Object):void
  {
  var token: AsyncToken = wrappedData.returnToken;
  var currentOperation:WSDLOperation = wrappedData.operation;
  var decoder: SOAPDecoder = new SOAPDecoder();
  
  
  decoder.resultFormat = "object";
  decoder.ignoreWhitespace = true;
  decoder.makeObjectsBindable = true;
  decoder.wsdlOperation = currentOperation;
  decoder.schemaManager = currentOperation.schemaManager;
  
  
  var object: body = result.message.body;
  var stringResult:String = String (body);
  
  If (stringResult == null | stringResult == "")
  return;
  
  
  var soapResult:SOAPResult = decoder.decodeResponse (result.message.body);
  If (soapResult.isFault)
  {
  defects of the var: Array = soapResult.result in the table;
  
  for each (var soapFault:Fault in error)
  {
  var soapFaultEvent:FaultEvent = FaultEvent.createEvent (soapFault, token, null);
  token.dispatchEvent (soapFaultEvent);
  }
  } else {}
  result = property decoder.decodeResponse (result.message.body);
  
  
  If (result is ArrayCollection collection)
  {
  do you need to perform an upcast to specific type here
  var arrayTypedClass: Class = SchemaTypeRegistry.getClass(currentOperation.outputMessage.parts[0].type);
  
  result = new arrayTypedClass (result.source);
  }
  
  
  event: ResultEvent var = ResultEvent.createEvent (result, token, null);
  token.dispatchEvent (event);
  }
  }
  
  The statement where the error occurs is in bold above. The comment above this line says I should perform an upcast to a specific type here, but I don't know what that means. What specific type? How to determine what type of perform an upcast to?
  
  Any help would be appreciated.
  
  TIA,
  Randy
  

  Hi Martin,

  The error you have shown, it seems, that you have upgraded your SDK version, but not the Builder. The problem you are having is because of one of the classes (SchemaTypeRegistry) SDK has been updated static to a dynamic class. Therefore, using the call getClass() on it will not longer work. In addition, the lines that register type mappings do not work.
  We have updated the generated code, but it seems that you are using an older version. Now for the correction of your code, you should:
  1. locate all occurrences where the class of SchemaTypeRegistry is called a static class.
  2. replace the SchemaTypeRegistry by calls to SchemaTypeRegistry.getInstance () method, like this:
  SchemaTypeRegistry.registerClass (params) becomes SchemaTypeRegistry.getInstance () .registerClass (params)

  The problem is that when you re - generate the code, you will have to re - again all these changes.

  Hope this helps,
  Cristian

• Need help with Macbook

  Hello, I recently bought a Macbook from a friend and since I got the Mac it's very very slow at doing things like browsing the internet using Safari, it takes forever to load, web pages and all sorts of things that I'd like to get help with this problem maybe a few recommendations and also on how to speed up... If you need to care about Macbook, I can give these thx.

  To sell or transfer ownership of a Mac, even to a member of your family, you must follow these instructions. So far, you will have continuous problems.

  Refer to what to do before you sell or give away your Mac

  1. If you have enabled FileVault, disable it in system preferences > Security and privacy.
  2. "Remove" your iTunes account. Ditto for Audible if you have one.
  3. System Preferences > iCloud > deselect 'Back to My Mac' and 'find my Mac '.
  4. Disconnect from iCloud. Select "Delete from Mac" when it appears.

  Next: delete all of your personal information by erasing the internal storage of the Mac completely.

  1. If your Mac comes with a grey system installation DVD, start up your Mac with this disc in the optical drive, all holding the key c to boot from it instead of its internal volume, which must be erased before selling.
     • Apple stopped Macs shipment requiring these discs in August 2011.
  2. If your Mac does not comes with disks, boot OS X Internet Recovery:
     • using three fingers press on and hold the following keys: ⌘(command), optionand R.
     • With a fourth finger, press the power button to turn on the Mac.
     • Keep the other three fingers here where they are until you see the icon "spinning globe.
     • This method force the Mac to download BONES initially installed from Apple servers, that won't require not an Apple ID install.
  3. Remove any password Open Firmware, if you created a: select utility password firmware in the Utilities menu and remove.
  4. Select disk utility from the utilities menu.
  5. Delete all partitions that can be created.
  6. Select the icon for the hard drive to the Mac, and then select the tab "delete".
  7. Click on the 'Security Options' button and erase the drive.
     • More "robustly" you erase the disc, the longer it will.
     • The fastest method is sufficient, since all but the techniques more expensive and equipment will be able to recover data deleted safely.
  8. When he finishes, quit disk utility.
  9. In the utility menu, select Install Mac OS X .
     • An identifier Apple won't be necessary. If a prompt for an Apple ID, return to step 5.
     • Do not create user accounts.
  10. When he finishes, shut down the computer.
  11. If you want to install the bundled apps that have been included with your Mac, restart using your DVD Applications if it was included and install the bundled apps.
      • Apps, delivered with the new Macs sold without disks cannot be transferred. His new owner must buy them from the Mac App Store with its own Apple ID.

  If the Mac is sold to someone outside the family, consider the following additional information:

  1. System provided with your Mac installation DVD must stay with him forever and be included in the sale.
  2. Consider including your AppleCare certificate if you bought it, documents printed, same box if you have.
     • AppleCare remains with the equipment and can be transferred.
  3. Run an invoice indicating the serial number of the Mac.
  4. Once is no longer in your possession, remove the Mac of your devices in my support profile.

• Help with horror? El Capitan Mac

  Hello, I have major issues with horror.  It interferes with almost all of the process: navigation (Firefox or Chrome), MS Office, Adobe Pro, Finder...  I ran a report EtreCheck (see below) and the major problem seems to be Firefox.  I was wondering if someone could take a look at this and make other suggestions.

  Thank you!

  EtreCheck version: 3.0 (300)

  Report generated 2016-08-12 12:44:23

  Download https://etrecheck.com EtreCheck

  Time 06:53

  Performance: average

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: Beachballing

  Description:

  Beach ball with Firefox, Chrome, MS Office, Adobe Pro, Finder

  Hardware information: ⓘ

  MacBook Pro Intel Core i5, Intel Core i7, 13 "(mid-2012)"

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 38

  Video information: ⓘ

  Graphics Intel HD 4000

  LED Cinema Display 1920 x 1200

  System software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since the start time: about 3 days

  Disk information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 150,27 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  RD Slim BUP Seagate 2 TB

  EFI (disk1s1) < not mounted >: 210 MB

  SEAGATE External 2 to (disk1s2) Volumes/external Seagate 2 Tb: 2.00 TB free 1.20

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Apple's USB audio device

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  Logitech USB-PS/2 optical mouse

  Apple Inc. Apple Keyboard

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  / Library/Extensions

  [loading] com.sophos.kext.sav (9.4.52 - SDK 10.9 - 2016-08-05) [Support]

  [loading] com.sophos.nke.swi (9.4.53 - SDK 10.9 - 2016-08-05) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 152 tasks Apple

  [operation] 65 tasks Apple

  [killed] 13 tasks Apple

  13 killed process lack of RAM

  Demons of launch system: ⓘ

  [loaded] 46 tasks Apple

  [loading] 150 tasks Apple

  [operation] 89 tasks Apple

  [killed] 6 tasks Apple

  6 killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-02) [Support]

  [operation] com.brother.LOGINserver.plist (2016-03-10)

  [loading] com.gog.galaxy.commservice.plist (2016-04-24) [Support]

  [failure] com.maintain.PurgeInactiveMemory.plist (2016-06-09) [Support]

  com.maintain.Restart.plist [no charge] (2016-06-09) [Support]

  com.maintain.ShutDown.plist [no charge] (2016-06-09) [Support]

  [operation] com.maintain.SystemEvents.plist (2016-06-09)

  [operation] com.sophos.uiserver.plist (2016-05-12)

  Launch of the demons: ⓘ

  [performance]    BESAgentDaemon.plist (2016-05-16)

  [loading] com.adobe.fpsaud.plist (2016-06-28)

  [loading] com.gog.galaxy.clientservice.plist (2016-04-24) [Support]

  com.maintain.HideSpotlightMenuBarIcon.plist [no charge] (2016-06-09) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25)

  [operation] com.prey.agent.plist (2016-05-17)

  [operation] com.sophos.common.servicemanager.plist (2016-05-12)

  Launch User Agents: ⓘ

  [loading] com.adobe.ARM. [...]. plist (2016-04-22)

  [loading] com.bittorrent.uTorrent.plist (2016-04-19) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11)

  [operation] com.spotify.webhelper.plist (2016-08-10) [Support]

  [loading] com.valvesoftware.steamclean.plist (2016-07-14)

  org.Hola.VPN.plist [no charge] (2016-08-01) [Support]

  User login items: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  ClipMenu application (/ Applications/ClipMenu.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  MightyText application (/ Applications/MightyText.app)

  Internet Plug-ins: ⓘ

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-05-02) [Support]

  FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-29)

  AdobePDFViewerNPAPI: 11.0.15 - SDK 10.6 (2016-05-02) [Support]

  AdobePDFViewer: 11.0.15 - SDK 10.6 (2016-05-02) [Support]

  Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-29)

  SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-07-28) [Support]

  Silverlight: 5.1.50428.0 - SDK 10.6 (2016-07-29) [Support]

  The internet user Plug-ins: ⓘ

  Picasa: 1.0 - SDK 10.6 (2015-10-13) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-06-28) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,25 GB disc used: 348,98 GB

  Destinations:

  TB external Seagate 2 [Local]

  Total size: 2.00 TB

  Total number of backups: 29

  An older backup: 15/05/16, 06:27

  Last backup: 12/08/16, 11:45

  Size of backup drive: Excellent

  Size of backup 2.00 TB > (disk size 499,25 GB X 3)

  Top of page process CPU: ⓘ

  35% firefox

  11% kernel_task

  7% mdworker (13)

  4% WindowServer

  2% BESAgent

  Top of the process of memory: ⓘ

  GB firefox 3.08

  Kernel_task 848 MB

  180 MB mdworker (13)

  90 MB Microsoft Word

  Finder 82 MB

  Information about virtual memory: ⓘ

  24 MB of free RAM

  7.98 GB RAM (1.31 GB being cached) used

  3.01 GB used Swap

  Diagnostic information: ⓘ

  August 12, 2016, 12:24:55 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-122455_ [redact ed] .crash

  / Library/Sophos Anti-Virus/SophosWebIntelligence.bundle/Contents/MacOS/SophosWebIntelligence

  August 12, 2016, 12:00:06 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-120006_ [redact ed] .crash

  August 11, 2016, 01:40:07 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-11-134007_ [redact ed] .crash

  August 11, 2016, 10:17:21 /Library/Logs/DiagnosticReports/tcosrj_2016-08-11-101721_[redacted].hang

  / Volumes/VOLUME / * / Romeo & Juliet.app/Contents/MacOS/tcosrj

  August 11, 2016, 06:33:30 /Library/Logs/DiagnosticReports/_2016-08-11-063330_[redacted].crash

  ???

  August 10, 2016, 13:44:38 /Library/Logs/DiagnosticReports/firefox_2016-08-10-134438_[redacted].cpu_resour ce.diag [details]

  /Applications/Firefox.app/Contents/MacOS/Firefox

  August 10, 2016, 06:43:13 AM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-10-064313_ [redact ed] .crash

  9 August 2016, 15:17:53 self-test - spent

  First uninstall Sophos. Anti virus apps are not necessary and may cause problems. Remove the bittorrent as well. It can be a source od malware.