The A7r will work with only the power adapter plugged

I want to use this camera (once I have purchaced one) to copy photos and slides.  There may be a lot of time involved, and it would be nice not having to worry about battery life.

Hello oldchas! AC adapter / CC of the A7R is not able to provide a continuous camera power while it is operating. Only a charged battery can power the device. Power must be turned off and the camera connected to the AC adapter to charge the battery. The battery is not charged if the switch is on when you are connected to the power adapter.

If my post answered your question, please mark it as "accept as a Solution.

Tags: Sony Products

Similar Questions

  • Satellite A300 may depend on from when the power adapter plugged

    Hello

    I have a problem with my Toshiba Satellite A300 when the laptop is connected to the power adapter I have no possibility to turn it on, it's only 2-3 seconds once it comes down.
    When Toshiba is enabled with the battery power and I tried to connect the adapter it also goes down.
    I have no problem with the charge itself, but only with working with AC adapter.

    Please help me what can I do with this problem, does anyone has similar problem?

    Hello!

    For me it sounds like a hardware failure of the motherboard if the AC/DC adapter is plugged and the laptop is turned on

    I don't know but how best to m would be if you go to the authorized service provider nearest with the AC/DC adapter. Technicians can check your laptop and swap the motherboard if it of really necessary. The guys are very friendly and helpful!

    Here, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • HP Pavilion 6500 goes out when the power adapter plugged

    My Pavilion 6500 (specifically dv6623cl) turns off when I plug in the power adapter. If I plug it in, then turn on the laptop, it automaticly turns off before loading windows. If the laptop is already started, and I can plug the power adapter, it immediately turns off. I can charge the battery without any problem, also while the laptop is turned off, but as soon as I turn it on with the adapter plugged it stops, I checked the battery through HP battery check and he said its good, he is holder of a charge very well and everything, the only change made to the laptop hardware wise was an upgrade memory I had no such problems until the upgrade of memory, but I do not see how it would affect the power on the aspect, in order to make a system restore, if ever, I need, the poweradapter must be plugged and theres other system functions that require the adapter complete, it is a question that must be corrected

    any ideads what the problem would be?

    any help is much appreciate

    Thank you, rayandmaura

    Talk to a jury of uselles / forum, do those who seek info on how to reset / bypass the bios password on their (or anyone elses) computer or something as it gets 20 pages of answers, but asking a power / card issue and your luck if you get a response at all,

    I'll just give up to deal with this useless community and just buy 3 extra batteries and remind all of the accused

  • is it safe to keep the power adapter plugged into laptop all the time?

    I was constantly using a laptop Pavilion DV6-1230 we 5 years almost always with the power adapter is plugged in. I replaced the battery once. I was told yesterday that this isn't a good idea, because it can lead to a shorter battery hardware and life issues. We buy a new computer and want to know what is the recommended method for the use of current alternative with a laptop. Is always connected OK? Or we stop the computer at the end of the day? The power plug must be removed from the plug?  Appreciate the suggestions and recommendations on best practices in this case.

    Hello:

    It is not a good idea to leave the power cable connected with the battery in the PC.

    You should disconnect the power supply at least once a month even if you move the laptop, run Notepad as needed and let the battery drain down until you get the low battery warning.

    Then load it up.

    Here is a useful guide of HP to prolong the battery life...

    http://support.HP.com/us-en/document/c01297640

  • Equium A210-17i does not supply power to the top only with the power adapter plugged

    Equium A210-17i turn on when the battery is missing, but the laptop is set to the power supply dc?

    I have a dead battery and the laptop does not light with or without the battery inserted.
    The food came out 19v as it is supposed to.

    Also no led lights on the laptop when the power is connected and there is no sign of life at all by pressing power buttun.

    Thanks for any response.

    Hello

    The laptop must also lights up if the battery is not inserted.
    If the adapter is ok and if it s connected to the laptop, then the power led should be lit and it should light up.
    This led indicates that AC adapter provides power to the laptop properly.

    But if the LED turns OFF then that would mean that there is no power, and in this case the laptop will not turn on.

  • Upgrading the video card and power supply, these will work with my system?

    Hello, I am wanting to update my graphics card as my current one is finally fall behind on current games, BF3 beta is a restless nighmare and BC2 must be smooth running low (ick). I was satisfied with the weaker graphics for now, but its time for an upgrade. In any case, I think I have my selected updates and I just want to confirm that they will work with my computer until I pull the trigger. My current equipment:

    HP p6180t

    http://h10025.www1.HP.com/ewfrf/wc/product?product=4010451&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

    Intel Core2 Quad 2.83 GHZ

    8.00 GB RAM DDR3

    Vista 64-bit

    Creative Sound Blaster X - Fi Audio Xrteme

    1.5 GB NVIDEA GeForce GT230 [DVI, HDMI, VGA]

    I plan on upgrading the graphics card on an Asus NVIDEA GeForce GTX 560 (Fermi)

    http://www.Newegg.com/product/product.aspx?item=N82E16814121446

    And the power of a passionate Corsair 850W 80 + CERT (I know this is perhaps an exaggeration, but I can update to motherboards in the future to run two SLI cards and do not want to upgrade again)

    http://www.Newegg.com/product/product.aspx?item=17-139-009&SortField=0&SummaryType=0&PageSize=10&PUR...

    I removed the side panel to check the dimensions of the new card and it looks like it fits. The only thing that could be a problem of release the cables SATA for the hard drive and hard drive because they are both plugged into the two slots, I don't think that the two superiors would be no problem at all. Depending on the thickness of the new card is also, it may be very close to the sound card that is spaced only a slit above the graphics card. I have another location available PCIe x 1 go back one level more that I should be able to plug the sound card in if there is no problem.

    My question is that these two will be compatible with my system? (physical limitations side)

    Also, can I change which SATA plug the hard drive and disc plug in, without having to reformat? Is it just unplug and plug in the new housing? (setting power off + unplugged of course) Basically passing SATA0 and SATA1, SATA2, and SATA3. Or do need to be filled in order? (0 then 1 then 2, etc...)

    Finally, If I can't move the sound of a standard card, do I need to do anything other than the physically move when the computer is turned off and unplugged?

    Any help is appreciated, thanks!

    John

    jkalbin,

    You have thought through all scenerios. Move the sound card does not any problems. The hard drive should stay in header SATA 0.

  • Iconia W4-820 will not charge with the power adapter USB Std

    Bought my W4 Iconia four weeks ago, a demonstration model, the last of them. It was packed in the box with a micro USB x adapter USB OTG cable and a power adapter. Back at home I discovered that the power adapter has been to Asus, possibly mixed in the shop. The prospective buyer of the Asus Tablet demo likely will get the Acer adapter. Adapter Asus with micro USB male connector works fine; specs are 5.2V - 1.35 amps; seems to be a STD USB adapter. The Asus adapter has a connector to USB female port to connect to a USB x microphone cable to USB adapter (with cable power adapter came in the box). Bought a 2nd power with USB 2 socket adapter to connect my W4 Iconia and my Garmin Zumo390 browser to an adapter. Specs are 5V - 3.5 amps.
    The Zumo works very well with the new card, but does not work my W4. Charge light stays off. USB ports switched to he Zumo and the Iconia W4, but same result. Zumo fresh, but W4 not. Borrowed another power adapter USB, 5V - 2 mines anti-personnel and new Zumo accusations, but the W4 still does not work. Also tried different USB adapter cables, but the same thing; Zumo invoice, W4 does not work.
    How is that possible? I can't tell the difference of 0.2 V between the Asus adapter and a USB adaptor STD would make the difference. But maybe I'm wrong. Wanted for adapters for the W4 Iconia and found several, but all the 5V as expected.
    Can anyone help.
    Will go to the shop again next week, but if I need an adapter V 5.2 I should order with Acer. 5.2 V adapters do exist not (readibly).

    Resolved issues. A dark and humid Sunday afternoon back to the store with the Tablet and all the bells and whistles. Changed the card Asus for the original Acer 5V - 2Amps (10W). Took the time to find the Acer adapter in the store. Demonstrated the adapter 2nd with 2 output USB ports and it wouldn't work with the Tablet W4. Tried another and found to be ok. 2 USB ports have a different power, a port for a smartphone and the other port is one tablet. Total power rating of the adapter is 17.5W (5V - 3.5Amps); some 2.5 and 1Amps. A happy man is back home again.

  • The ICF-CS15iP will work with the iphone 5 with 30-pin adapter light

    the ICF-CS15iP will work with the iphone 5 with 30 pins to lighting

    Hello, Howard.

    Welcome to the community of Sony.

    Sony has not yet tested iPhone5 with our units as it has only been recently published. If you are able to connect the iPhone on the dock using the lightning adapter, you will need to check the compatibility of the iOS6 with the dock. I suggest you consult with Apple if the home Sony station were found to be compatible with the iPhone5.

    If my post answered your question, please mark it as an "accepted Solution".

  • The Lenovo 65W Slim adapter (in Yoga) will work with the carbon X 1?

    Hello

    Does anyone know if the Lenovo 65W Slim adapter for Yoga will work with the carbon X 1?

    I would like to have a lighter power brick to travel with. I'm willing to accept slower load time.

    http://shop.Lenovo.com/SEUILibrary/controller/e/Web/LenovoPortal/en_US/catalog.workflow:item.detail?...

    There is also a version of 45W:

    http://shop.Lenovo.com/SEUILibrary/controller/e/Web/LenovoPortal/en_US/catalog.workflow:item.detail?...

    Thank you!


  • All-in-one HP Officejet 7300/7400 series, it will work with Windows 7 and how to get the OCR software work?

    I have a HP Officejet 7300/7400 series all-in-one, it will work with Windows 7 and how to get the OCR software work?

    By installing complete software functionality of the HP cd or online installation and connection of the printer only when the installation says too much

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=391182#n193

  • The Officejet 7140xi will work with Windowds 7?

    A friend has offfered me an old HP Officejet 7140xi All - in - One Printer.  I need a document scanner.  It will work with Windows 7, or do I have to install Windows XP on my old laptop?

    Hi rbj1933,

    Welcome to the Forums of HP's Support. I see you want to learn more about the drivers available for the portable printer Officejet 7140xi.

    There is a full feature software and driver for this printer for Windows XP, but there is only a print driver available for Windows 7 Microsoft base. I have included the document installation of the printer software in Windows 7 for a USB cable connection to see again you. One of the frequently asked questions is how to scan using the basic print driver. I recommend you read this article before decide you if you want to install Windows XP or not.

    I hope this helps!

  • CC of Photoshop and Bridge CC will work with the new Windows 10 which will be released tomorrow?

    CC of Photoshop and Bridge CC will work with the new Windows 10 which will be released tomorrow?

    The update for the desktop app from creative cloud yesterday was made to support Windows 10 better.  I had no problems with her hard on windows 10 previews.  I have a lot of creative cloud Application installed on Windows 10 although I only use Photoshop.  However, I only install Photoshop CC 2014 and 2015 CC and I do not install Lightroom.  There are many questions in Photoshop CC 2015, no issues that I know seem 10 associated Windows.   Creative Cloud Desktop Application update some CC 2015 application such as illustrator, Prime Minister, others but not Photoshop. Update all installed on Windows 10 but since I do not use these applications I can not report on how while they run.   Bridge CC and CC 2014 Photos work fine on Windows 10.

    Using creative cloud | Creative Office Cloud app | Release notes

  • A HP Officejet H470wl will work with the MacBook Air

    A HP Officejet H470wl will work with the MacBook Air? The driver is still supported? I'll buy an Air.

    Hello..

    New Mac come with v10.11.x El Capitan pre installed.

    I checked for compatible drivers (software) for pinter them HP > http://support.hp.com/us-en/product/HP-Officejet-H470-Mobile-Printer-series/3434 453/model/3434454/document/c04510394 /

    Fact on the Mac, you would use Software Update to install the drivers according to the HP website.

    Printer and scanner software available for download for your Mac

  • Will 1st gen magic mouse will work with the new Mac Mini?

    #1

    I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

    The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

  • If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

    If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

    This is the Forum for Windows Update.

    How does the Windows 7 upgrade Option?

    The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

    Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

    Read the info here to see if you qualify.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

    FAQ about the upgrade is at the link above.

    http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

    Windows 7 Upgrade Advisor.

    http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

    Railways upgrade to Windows 7 at the link above.

    For any other question of Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 forum for questions on windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for