the ADC channel ID

Similar Questions

• PCIe-6259 anallog effect of clipping (perhaps overvolting) on other analogously in the input channels?

  Curious to know if the cutting/possible ovevolting on one of the analog channels would affect the performance of other similar channels. I have two systems, one where signals don't clip and the other channels are still operable. The other has some problems of cutting (which fade eventually btw) on some of the ins anlog. One with the cutting on other channels are apparently unusable while those who did no cropping entry seems to be well.

  I seem to be affected by a situation in which hanging on an analog channel makes so that other analog channels do not work.

  Curious to know if I can see what is expected?

  Anyone have an overview here?

  This is how it is supposed to work?

  We do not guarantee that all channels will work normally when you're in a State of fault/over-voltage.

  Since it is a MUX architecture'ed, that the channels are analyzed in order in the amplifier of shared instrumentation and ADC.  If the instrumentation amplifier is on track for channel 0 (for example), it will take some time to recover from this error after the next channel is enabled in.  This can cause a number of incorrect following channels (possibly indicated as being on track).

  Of course, we do not recommend to use this device in an error condition. When you said "analog channels does not" what do you mean?  The data on track?

  Some things that might help:

  -Slower sample which allows more time to settle the instrumentation amplifier

  -Skip the chain incriminated in the scan list

  -Make sure that the offending channel is set to the widest range of voltage (+/-10 v)

• When released the 64 bit version of Firefox to the main channel?

  When released the 64 bit version of Firefox to the main channel? I thought it was supposed to be released when version 39 came out, but I must have been confused.

  No version passed was a guarantee of having Win64 for liberation, but more of an opportunity or that there has been speculation that Win64 builds on the beta channel from 37.0b2 build target.

  I guess you mean the Win64 (64-bit for Windows) and not on Mac OSX and Linux built which has 64-bit commercial for Firefox 4.0 versions both because easier to do and that it.

  If all goes well the Firefox 41.0 will be the first version to have Win64 rests alongside the 32 bit Windows builds.

  Win64 version was planned no version of Firefox. Then, on short notice for a brief period of a few weeks before Fx 40.0 version Mozilla thought to Win64 Fx 40.0 release but was changed to 41.0 Fx.

  Two things of note for versions of Firefox Win64 starting 41,0 + release. Only 64-bit Flash Player is white listed to run in Firefox Win64. Seconed we need 64-bit Windows 7, 8.x and 10 as the 64-bit Windows XP, Vista and server cannot run Win64 builds from Firefox 37.0 + development relies.

• I got 40 Firefox and I'm on the beta channel - why do I get messages saying that my browser is not updated?

  I've been on the beta channel for centuries and have found this problem for some time. Many Web sites meet that my browser is not up-to-date, as the Mozilla site done before asking this question, but when I check updates the answer is always that the browser is up-to-date.

  Why?

  Hi larssonswood, this is caused by the masking extension agent you have installed.

  Disable or remove modules

• Is it possible to change the default channel strip settings?

  Is it possible to change the default channel strip without having to depend on models?

  For example, I always wish to have:

  • Follow the value Name = 3 lines instead of the default line 1.
  • 'Follow the icons' checkbox deselected
  • Always follow box color
  • Control surface Bars always deselected

  Stuff like that... This apples to any screen that is affected by the Configuration of channel strip window. (View mixer or titles).

  Thank you!

  Is it possible to change the default channel strip without having to depend on models?

  NO.

  But why not use a template? You use a template of this moment anyway, the default value of project. Just change and set the Start Action that you configured

  

  Fact

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Divide the Audio channels?

  Is it possible to split stereo audio (as from iTunes, for example) so that the left output channel passes to the left speaker to the left of a pair of screens Thunderbolt and the output channel right to the right of the screen to the right speaker?  The 'average' channels should be silent:

  SOURCE DISPLAY LEFT         

  L — — — | ------> OUT L

  |     R OUT (entry/no cut)

  |     ——————————————————————

  |     L OUT (entry/no cut)

  R — — — | ------> R OUT

  RIGHT DISPLAY

  I do not know... Try to play around with the Audio configuration utility and MIDI: http://www.macobserver.com/tmo/article/audio-midi-setup-your-macs-secret-sound-m anager

• In the past years, I got a Safari extension for "weather", which, as I recall, open to The Weather Channel.  Somehow, I lost and can't get it back now.    That is what it is?

  For a few years in the past, I had a Safari extension for "weather", which, as I recall has opened the web site of The Weather Channel.  I cannot find such a thing now.    That is what it is?

  Hello..

  See if you can later the extension of the weather or a similar one in the Gallery of Extensions Safari here > https://extensions.apple.com

• When I open a link irc with a string name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "7%" instead of "~" at the end

  When I open a link irc with a string name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "7%" instead of "~" at the end
  http://img835.imageshack.us/img835/2856/clipboard05nq.jpg

  I can't open the image, but I can say something in general about the tilde.
  
  The tilde "~" is an unreserved character and that's why it can be replaced by its form encoded percentage '% 7' inside a URI without changing the meaning. See
  
  http://en.Wikipedia.org/wiki/percent-encoding
  
  According to article 2.3 of RFC3986 we should prefer the encrypted form so this behavior seems to be somewhat outdated.

• YouTube videos online, such as the weather channel or utube, will not play on Firefox. They play well on Internet Explorer, so I guess it's a problem with Firefox.

  Flash player is up-to-date, and Firefox is the latest version. However, no videos will play on Firefox. They worked fine until recently. We used to watch the videos offered on the weather channel, but the screen is black. When I click on the play button, nothing happens.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Camileo X 450 Audio only in the left channel

  Hi, I bought a Camileo X 400 that had a focus problem, so I have sen't back and Toshiba sent me a replacement unit, in this case a Camileo X 450.

  The problem is that he only record audio on the left channel.

  Is there a way to fix this?

  Best regards
  Paulo brine.

  Paulo of Halo

  All you can do is to check all the settings to see if something can be changed, but I don't think that there is something that you can about it.
  On my Toshiba Camileo H10 cam there is nothing where I can enable or disable an audio channel right or left.

  You have everything new and original box Camileo X 450?

• Digital TV does not detect the analogue channels

  new digital tv (26AV700A) captures all the available channels, analogue channels in particular. our previous analog tv picked up all the analogue channels when it is connected to the same antenna.

  finished installing (Assistant) and auto scan which finds some of the similar, but not all.

  the menu of configuration, channels submenu, lack two menu items specified in the manual of the TV - both refer to analog channels, IE and

  It seems that some analog key functions are missing - is there a setting that turns the whole thing analog power?

  Hello

  I don t think you will get the right answer here because it is a forum for Toshiba portable computers/computers and all the stuff that has something to do with it.
  If you have some problem with the TV I recommend you to contact your dealer in TV shop. They specialise in these issues and I hope they can help you with this.

  My friends also Toshiba TV and in the settings there is option where you can activate channel scan for channels analog, digital or both of them. There is also the option of quick analysis. Everything is described in s operating manuals.

• Toshiba 32W1333DN: name of moving/deleting/edit buttons for the missing channels

  Hello

  I just bought 32W1333DN in Sweden.
  But I can't change the position of the channels in the channel list.

  Both the Quick start guide that comes in the box with the TV and the online manual has pictures and details on how to move/remove the channels and change the names of channel in the channel list.

  I'm supposed to go in
  Menu->-> Edit Channel List channel list.

  Once there, I select channels and perform tasks by selecting the buttons.

  But these buttons aren't where I watch my TV.
  Instead of the buttons for * OK * / * Move * / * remove * / * change name * / * lock * I've * OK * / * lock *.

  What is going on?

  In settings, version of the program is * V.2.1.4A * and upgrade software * V.2.1.9x *.

  Hello

  Please take a look in the user manual
  [Manual Toshiba 32W1333 | http://www.toshiba-om.net/LCD/PDF/English/W1333-32-English.pdf]

  Page 17 provides information on the list of chains, sorting programs and program locking.

  For example, to move the only channel in the list, you must do the following:
  Channel order can be changed according to your personal preferences.

  SELECT the main key channels list menu, then press OK.
  Select modify the channel list to manage all channels. Use upward or downwards and the OK button to select Edit list of strings.
  The Move option in the channel button list and press OK.
  Change number of screen will be displayed. Enter the desired channel number using the number keys on the remote control. If there is a channel previously stored on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK.
  Selected channel is now moved.

• I am unable to see the Weather Channel videos

  I can't see the videos on the weather channel. They don't seem to be flash videos. All I get is a spinning loading wheel which does not stop. I don't have similar problems on other sites (CNN or Youtube for example). If I turn the flash on and outside blocker, he does not seem to affect the problem.

  Glad you found a solution, obviously you don't get the free weather video without ads, I assume that income from the Fund to ads on the site.

  If you want to mark positions as useful, that connected while that mark the thread as solved,

• Why the Math channel records datapoints twice as much as my channels of data when I export it?

  I have data on channels 1 and 2 and also have the selected math (A + B) channel.

  When I export data, it records twice as many data points for the channel of mathematics than others. Why is this?

  Notice that I use a sample, pic not detect.

  If someone could answer this question, I would be very grateful.

  Lesachtalerhof wrote:

  I have data on channels 1 and 2 and also have the selected math (A + B) channel.

  When I export data, it records twice as many data points for the channel of mathematics than others. Why is this?

  What version of the application you are using - 1.0, 1.1 or 1.2?

  In versions 1.0 and 1.1, the math channel makes a linear interpolation between the samples using cursors support and measures. 1.2, we have improved the cursors and were able to remove the linear interpolation.

  What is your version of the application, the time stamp associated with each sample will tell when the sample was taken.

• The NI USRP-295xR RIO allows a front-end Ettus BasicRX IF-sampling? And what is the rate of the ADC to FPGA data?

  Hello!

  I'm in the quest to replace some aging PCI-5640R. I am currently using as a portable-Journal data solution, mounted in a Magma Expresscard to PCI box with a laptop. As a reference of the time, I use a Symmetricom XLi.

  The equipment is dependent on the sampling finished a set of samples once a trigger signal goes high and also receive antenna azimuth information using two lines PFI more. The signal is sampled at IF, 30 MHz, and the signal is less than 5 MHz bandwidth.

  Now, I started watching the Ettus X 301 with a GPS OCXO and MXI-express interface which should be the same as the USRP-295xR NI. It is available as device NI RIO with three different front ends, unfortunately, none of them work at 30 MHz.

  Q-1: Ettus has the front-end 'BasicRX', but it is only considered compatible with LabVIEW driver and not necessarily with the RIO. Is the front-end BasicRX usable with the USRP - 295XR RIO and MXI-interface with LabVIEW FPGA? Should I just avoid trying tune the nonexistent LO? As long as he gives me data, I can live with some error messages during the Setup...

  It's the best solution for me, but if it is absolutely impossible, I have a few questions:

  Q-2: information on the front end are really rare in the pages Web OR both Ettus, but the WBX is listed up to 50 MHz frequency, to have a filter of low pass of bandwidth of 40 MHz to I and Q. This should mean a total of 80 MHz of bandwidth with I and combined Q,-40 to 40 MHz. Why did the bandwidth to Web pages as OR listed being "40 MHz bandwidth in real time", if the low pass filter of the WBX is 40 MHz in I and Q? Not the band total bandwidth or 80 MHz?

  Q-3: assuming a bandwidth-40 to 40 MHz: could I put the WBX LO at 50 MHz, be tuned to the frequencies from 30 MHz to 20 MHz signal,-20 MHz and use a bandpass filter to the FPGA to extract the new signals and remove all other signals?

  Q 4: I tried to start a FPGA project in LabVIEW and add the x 301/294xR/295xR as a target. Data clock is locked to 120 MHz, which I guess means he will receive no data to 120MS/s IQ? The x 301 Ettus is listed as provide data of the ADC to the FPGA at a rate of 200 ms/s, could someone explain to me why, OR USRP RIO expects only database 120MS/s?

  Hi Idar,

  Yes, you should be able to put the basics on your X 310/USRP RIO and use LabVIEW FPGA to receive 120 MECH. / s of the DACs.  The example I posted is in fact not for the precompiled file bit.  The example I posted is for LabVIEW FPGA, which allows you to add the IP address for the FPGA.  There is a sample project that comes with LabVIEW FPGA which is the recommended starting point to build your FPGA application.  The sample project has all the configuration set up as well as broadcast continuously and pads/FIFOs in the FPGA and examples for synchronization.  There are comments in the code example that show where he must add your own blocks of property intellectual as a filter and decimater you mentioned.  The PDF I posted shows what changes you must make to this sample project using the Remora Basic/LF.

  I would like to know if I'm not explaining this clearly, or if you have any questions, I'd be happy to help you!