Vista Boot Fail: PAGE_FAULT_IN_NONPAGED_AREA

Similar Questions

• Every moment & then my Vista Original fails to start after an automatic update & shutdown.

  I had upgraded from XP to Vista Home Premium.  All updates are on. I also use Microsoft essential security such as anti-virus protection. Every moment & then my Vista Original fails to start after an automatic update & shutdown. I had to reinstall all my programs. Happen 3 - 4 times in less than a year. The disturbances windows also does not work

  Any Advisor. Should I upgrade to XP?

  Hello

  Make sure that you do not install hardware 3rd party via windows update drivers

  they are normally not up to date and can cause computer problems

  change the way you receive updates and check what you install ad if you don't not right-clicking on UAC prompt you to hide it:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  and if you're still stuck in a loop non-Boot read these methods on how to try to fix it:

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ;

• Windows Vista boot problems, need to press Ctrl + Alt + Delete to work around

  original title: VISTA Boot Up problem

  I have an emachine with Vista for over 2 years with no problems, but recently, when I turn on the PC I get a black screen that says: "Boot From CD-ROM AHCI.  NVIDIA Boot Agent 249.0542.  Client MAC ADDR: 00 1 D 72 A9 D7 B6 GUIDE FFFFFF... "In order to get past this screen, I press Ctrl-Alt-Del and it will then start VISTA.  The last 3 days, the Ctrl-Alt-Delete method failed the first time and I had to repeat up to 3 times.  Now I wonder how long the Ctrl-Alt-Del bypass method will last.  What can I do to get the pc to boot normally again?

  start in safe mode.

  Choose Repair computer

  Or the last known good configuration.

  If windows loads in safe mode then uninstall any recently installed.

  Maybe do a system restore to an earlier date.

• Qosmio F30 starts with blue stripes during Vista boot screen

  My Qosmio F30-114 runs for years without problem with Vista Ultimate.

  In recent days, there is a huge problem.

  The Qosmio starts with blue stripes during vista boot screen.

  So I deleted the driver for the graphics card and used the standard vga driver for the card. the wizard of material found one driver on the system.
  For a brief moment, I was very lucky.

  After a reboot, there was a blue screen. After the next restard again once the driver to the standard vga card.

  What can I do?

  The download section of toshiba has no drivers for graphics card.
  And really... I wonder - how it works every year without problems...

  Someone at - it a solution?

  thanx

  toshibalover ;-)

  Hello!

  First you have this problem on an external monitor too or only on the screen internal? Maybe it s is not a graphics card problem so check it with an external monitor.

  I checked the Web from Toshiba site and I can find drivers for the Qosmio F30:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Qosmio G35-AV650: how remove Vista Boot Manager and install XP

  OK, I got the g35-av650 - US. I don't see any good American forum Toshiba, so I post here.
  First of all, I must say I'm getting very frustrated.

  1: I upgraded my BIOS to try to install windows vista. Vista installed, however, it works well. It must be driver problems. I deleted the partition that I allocated for Vista. Now, how the hell do I remove the screen/start menu in vista.
  I want to get back my XP operating system selection screen.
  I think it has to do with the boot record.

  2: my bluetooth isn't all work more (don't ask me why...) After that I updated the BIOS to version 1.40 to the newest 3.30.

  The recovery CD said I use the CD in the computer wrong? Is it possible to downgrade the BIOS/solve this problem, or bypass it.

  Thanks for the responses, because they will be very appreciated.

  Hello

  (1.) you want to reinstall XP on the HARD drive or you want to cancel only the vista Boot Manager.
  Usually after reinstalling XP, the boot manager should disappear.

  But I found these tips step by step in the internet:

  -Start your computer in Windows XP.
  -Make sure you have the image of Vista DVD emulated or in the DVD drive.
  -Go to start and run. Type in e:\boot\bootsect.exe/nt52 ALL/force (without the quotation marks and replace e: with the letter of your Vista DVD).
  -Restart the computer, and you notice that the selection of start menu disappeared.
  -Format the partition/drive where you installed Vista.
  -Remove the two (Boot.BAK and Bootsect.BAK) files on your file of root of drives XP (c), it was backup of your previous boot loader files, now is more useful.
  -Optional: Restart to make sure it still works.
  -Use your partition software to merge your partitions.

  2.), I hope that you have used the BIOS from the page we Toshiba. However, the BIOS update should not has a bad influence on the functionality of BT. Try to download the latest driver for BT and install again.

• Recovery of Windows Vista BOOT MGR is missing

  HP Windows Vista loading SP and began a loop at 3 on 3. Now it says boot mgr is missing. I don't have a disk recovery or start. I use my newer computer with windows 8.1. How to make a floppy disk recovery or the HP windows Vista Starter? any suggestion would be appreciated.

  Discussions were merged.

  Duplicate is not removed as more information provided by OP.

  Hello

  You cannot repair Vista with Windows 8/8.1 except it can be used to download and create
  Disks of Vista.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  BOOTMGR is missing Press Ctrl + Alt + Delete to reboot the error message when you start Windows
  http://support.Microsoft.com/kb/2622803

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try the startup of the Options or Vista recovery disc repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen on vista boot even safemode

  Only change I made last week is to install roxio.  I had started after that.  Also have had the problem since the week last on my url automatically redirected to other sites.  So think, it may be a virus/spyware.

  How to debug the blue screen?  It is not even stay long enough for me to this Reed continues.  I think the code is like 0 x 0000005.   This happens after the vista boot screen gets up and I select vista boot - load all the drivers etc. then shows a black screen, and then a quick blue screen then reboots.

  I am able to get connected via the CD of vista - but not to create the administrator account for me to use the recovery.  But I can access the prompt - ran the check disk, memory check etc - all the utensils that difficult is fine (no new material not added)

  I also chose start with logging and log file ntbt*.txt doesn't seem to have problems.  Even safe mode is a failure.

  Can any help on how I debug?

  Thank you

  Hello

  The code confirms everything you have already said - 7th with the parameter 005.

  That your drivers to work has little to do with the question of whether if they work now. They could have
  become corrupted, an update might make them unstable, other causes may force in
  Unstable States (for example, some games on some hardware) and a host of other issues.

  Try the Recovery Console if you have one and a Vista disk, if not to run the system restore back to a point
  before that happens.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  From the COMMAND PROMPT

  C:\Windows\System32\rstrui.exe

  You can also try the Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  And you can try to remove the main drivers in the hope that it will allow access.

  Check this method to remove drivers and use a Vista startup disk
  http://www.vistaforums.com/Forum/Topic13820-21-1.aspx#bm152234

  Another tip on a PC is trying to replace the video card for a good market in the hope that the video driver is the
  issue. This can be done with video embedded by turning off the edge in the settings (BIOS/CMOS) if
  some require additional methods. And of course there does not guarantee that the video driver is the question.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to remove the watermark from desktop vista boot

  How to remove the watermark of ' Wndows Vista Starter from the desktop? I changed the same wallpaper theme and also reviewed the "Bcdedit" cmd.exe... "but in vain.

  Unfortunately it is one of the many limitations of vista boot,

• Vista boot failure

  Vista boot failure:
  When you start there 3 beeps (long, short), and nothing, the screen remains black, empty.  With Windows Vista Ultimate install the disk in the DVD player, nothing else.

  Pre-existed freezups usb input, but only after connection, so used safe mode system restore and went back to an earlier version, which worked for a short while before the same problem reappeared.  Tried to reboot with the installation of the system disk, it almost worked, in vain.  Now I'm in the first situation described.  All hope?

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  Read this on the 'beep' error codes:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  Check out the Bios in your computer starting information online from the manufacturer of your computer and use the links that I you provided with to see what mean "beeps".

  If you are unable to determine the hardware problem yourself, contact the manufacturer of the computer, if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  See you soon.

• Windows Vista boot and goes directly to the F8 screen

  Windows Vista Boot and goes directly to the F8 screen, when you select an option it the computer goes black and never start. I do not install any program again, I worked with my online banking and the computer freezes I turn it off and restart and from there to show this problem. I test the computer with seetools to test the hard drive but when I hit to accept the test the keyboard won't obey my order; later I test with Hiren and I could make a mini feture call windows xp here I could see the C drive and all files on this too, I was able to open it. What you think about that happening could be the operating system or perhaps another problem?

  Hello

  Please follow the steps mentioned in the link below.

  What to do if Windows does not start successfully http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Remove vista boot screen

  Hello

  I'm planning a check disk to run at reboot, but I couldn't see the activity and results of the operation of check disk because of the vista boot screen.  I never noticed this problem before.  However, I wonder if anyone knows how to disable.

  I thought about the gui option not via the msconfig Panel. But if I remember that this simply deletes completely out the screen during the boot process.

  Thank you.

  Answer: Disable "no GUI" in the Panel under the msconfig Startup tab.

  Apparently, in the activation of vista "no GUI" allows the vista aurora boot / splash screen, thus hiding the start menu, check it out operations on disk and memory diagnostics.

  Under xp, which allows 'no GUI' blacked out on the screen and hidden from the above process.  But in Vista, rather than be a screen blacked out, vista boot screen is engaged.

  As my question, in some sort 'no GUI' was enabled without my knowledge.  So I could not see the background process during startup.

• Unable to start: Vista boot.

  I have a Dell with Vista 1526.  The machine on the powers, but does not start for Vista.  I have no disk.  How can I start to Vista?  I tried the bios and it does not work.

  original title: Vista boot.

  H. Weiner

  If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  Mick Murphy - Microsoft partner

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Vista to XP, XP boot fails... I'm stuck.

  Hello

  Had problems with my HP DV5-1110eo (amd athlon 64 x 2).

  Having read many threads here how to install Xp on a Vista computer, but now I'm stuck.

  When I put the "AMD Driver SATA AHCI Controller" (RAID7xx) x 86 driver in nlite, with XP sp2 I could cross the blue screen during the installation.

  The installation went well. But when XP tries to start, the XP boot screens and then comes a quick blue screen, until the computer restarts...

  Any idea?

  (must mention that I try to use dualboot. I have Vista installed and done some hard drive space free to make a new partition to install XP, and as mentioned the installation went well)

  greeting

  Message edited by Piccasso9 on 06/05/2009 12:49
  Message edited by Piccasso9 on 06/05/2009 12:51

  It really looks like a bad driver.  No more connected (scanner, external hard drive, drive external floppy, USB key, monitor, mouse, keyboard...) good?  I saw memory cause this type of problem (more than 4 GB) sounds almost like maybe the installation had problems and that it is incomplete or corrupt.

• Update for Windows Vista (KB973687) fails to install (Error 80070020), even in save mode and boot clear. How can I install?

  Vista 32-bit SP2
  Norton Internet Security 2010, self-protection and firewall disabled
  FujitsuSiemens Scaleo with Intel Core2 Quad

  Thank you much in advance.

  rh69,
  When you have uninstalled Norton have you used the Norton removal tool?  If this isn't the case, you may want to try this to remove it and then test the updates.  It is also possible that a malware\virus has exceeded Norton.  You should look at this thread and check your system for infections:

  Get rid of malware

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.