mp3 FLASH or SSD INTERNAL zip clip

Similar Questions

• can I move my directory of my flash drive SSD internal to my internal hard drive using OSZ 10.11

  Start getting tight on space and just noticed that my directory where to put the word, excel docs, pdf files, e-mail, etc. is actually on my SSD. I would like to move into my internal hard drive because it is bigger... I can do this without causing havoc on my Mac. I use an iMac 27 "mid-2011 running OS X 10.11.

  Thanks for the help.

  Yes, it's what I do with a dual SSD/HDD disk configuration.

  

  I keep my iTunes, iPhoto, iMovie libraries on HARD drive.

  I also pushed some non-essential app and the files on the HARD drive.

  Last but most important, you have a good backup of SSD and HDD...?

• Time Machine, you see only not the ssd internal

  Today, I had my old OWC replaced for a bigger Samsung 850 EVO SSD SSD internal flash drive.

  I named the new SSD, the same as the old.

  The new SSD is the boot disk and it works without problems.

  But now I see that Time Machine does not see this new SSD (he did see and save the old).

  This rather new Samsung SSD is not supported by Time Machine and therefore not show under the volumes available?

  I already tried the following Terminal command:

  : write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1

  But no success with that and in my case it is an interior volume, perhaps the command is wrong then?

  Or am I mistaking here and are the Time Machine preferences "Select disk" only discs showing where you can save to and not FROM (in the 'Options' section, you can exclude certain things and it shows the disc)?

• Zip clip is impressive, but the screen is sideways

  I recently put to date of a Clip + to a Zip Clip, and everything is even better than before, except that the screen is sideways to Polarized Sunglasses. Any other portable device I own (phones, MP3 players, tablets, etc.) appear to have installed their screens with glasses polarized in mind, but I have to rotate the Clip 90 degrees Zip in order to see the screen with my glasses.

  I know it's a longshot, but if I open the Zip Clip and physically rotate the screen, is there anything in the firmware that allows me to rotate the screen 90 degrees? If not, can anyone think of a way to fix this problem?

  
  

• Is the clip on the Clip Sport more sustainable than on the Zip Clip?

  Like many of you, I had several Zip Clip clamps break/crack.  It is is a regrettable fault on an mp3 player also very functional.  I have my Zip clip to my belt of shorts when running, so a work item is an essential feature for me.

  So is the clip on the new Sansa Clip Sport more rugged/durable and less prone to breaking than on the Zip Clip?

  This bumping to see if someone can answer. Thanks in advance.

• Zip clip has strong burst of static electricity at the end of some tracks

  Recently newly bought Clip Zip 8 GB will have a strong burst of static at the end of some tracks. This happens on the titles that I put on the unit or with tracks that came on the device. I have a 8 GB microSD card, and it seems that both internal and external memory circuits have this problem. I don't know what the problem is, any comment is welcome.

  I updated the firmware from 01.01.20A and it seemed to solve, or at least are not titles that have had the issue. I'm thinking that it resolved. Curiously, my wife bought an another zip clip last week, 4 GB, and it's at 01.01.20A.

• Zip clip does not play music

  Hi, I have problems with my Zip Clip. The last time that I used it, all the files/folders on this subject were deleted. I recreated the music folder and added a few songs that were playable on the front. When I click on the songs, they do not play. The text scrolls and but the progress bar never moves and theres no sound. It's not a headset issue. radio still works. I tried to reset and also updated the firmware. He has now TWO files 'Music' (one is what I created). It won't let me copy in the other folder of music or one of the automatically created folders.

  Edit to add: I managed to do play music from SD card. It's just the internal memory that does not work. I added a few songs in the 'real' internal sync for WMP music folder. He jumps through all the songs in the internal memory now. This sounds like a hardware problem?

  I would try to format (Settiings > system settings > Format) which will clear the memory and then re - load some files on the internal memory and see if they play. They are not DRM files (Rhapsody, sound, etc.) are they?

  I would also keep WMP from the equation. Set the player in MSC mode (settings > system settings > USB Mode > MSC) and just drag & drop (copy & paste) files from your computer to the player.

• Zip clip, buy or wait for the announcement?

  Hello guys!

  I intend to order me a Zip Clip in a few days now. After searching a while for the perfect affordable MP3 player, I decided that I'll settle for the Zip Clip 8 GB gray.

  However I just found out that SanDisk usually offers a new Sansa around this period of time. Of course if this news is just as good, so I want a new one to pick up the cheapest Zip Clip since the older products always fall in the price.

  See a SanDisk has not officially announced anything yet, I ask your advice. Just buy or wait a week or 2?

  Edit:

  The image of facebook hype has already posted by them in April as well. https://www.Facebook.com/photo.php?fBid=10150854375014453&set=a.10150176477564453.316366.9204649452&...

  7Ujr1v0NmSQA wrote:
  Download the zip file. You can probably pick one up cheap when Christmas rolls around. a 8 GB could go as low as $40 on a Black Friday sale. the link of the jpg is a picture from the clip + has been the 2nd clip of Gen. the zip is 3rd generation don't need to pick up a player gen next until it is capable-rockbox. SanDisk does not know be revolutionary/innovative for the next gen clip is probably not worth the wait. I hope that sandisk makes me eat my words and give us something really nice.

  The Zip is nothing more than a Clip + with a slightly larger screen, the color. However, it is low-resolutionm making album art look grainy and nasty. Also, I don't like the layout of the buttons control (on the Zip) that extends all the way on the side of the unit which is must more easy to accidentally FF or REW in the middle of a track when simply catch or pick up the player. Adds that its AAC support is uncertain, at best, and I think the model is an alternative much better.

  But you pouvez install Rockbox on both units securely. Do not pay attention to the nominal capacity of unstable on the Rockbox site. They expect just someone finish manual user until they can change to Stable. It won't help the screen low resolution or the layout of the buttons, but some actually prefer the Zip on the sign more.

  Unless that SanDisk has changed their marketing and strategy plans to release a new player and more ready for the blitz of sales Q4, I doubt we will see an new MP3 of them this year.

• SSD internal on iMac mid 2011

  Hello. I'm editing a short film, and because of the length, I need to add a SSD drive on my system. As far as I am concerned, I have two options:

  1. Buy an external SSD drive with interface thunderbolt.
  2. Add an internal SSD but also to keep my HARD drive.

  The first option should give me a real speed around 350 MB/s. I was wondering:

  • how fast I would get about an SSD internal?
  • is it dangerous for my system to have both drives as overheating?
  • It is worth?

  Thank you in advance.

  don't think that love at first sight would be a limitation in terms of speed

• No record in my Zip Clip

  With Windows Explorer, the only file shown on my Zip Clip is "Devicon.fil". What happened to the records to which I can add music? Is it possible to reformat the Zip Clip so I have the necessary files?

  When I turn on the Clip Zip I can switch between the different choices (Radio, Sport, music, etc.), but I can't add any tunes via drag and drop.

  What is the USB setting under settings of the player, the value options? You could try it MSC mode if set to Auto or MTP mode right now, or if set MTP mode in MSC mode. The trick with the USB mode is, your computer sees only the files that have been moved to the drive under USB mode that the player is then connected to the computer under. The reason why it may be better to leave the value MSC or MTP USB mode all the time and always (and to avoid the USB Auto setting, which tries to connect in MTP mode but then by default in MSC mode, if necessary).

• HP Envy 750-197c Desktop: you can add a SSD internal flash disk to the envy of HP 750-197c Desktop

  You can add an internal SSD to the envy of HP 750 - 197c Desktop that has a 2 TB drive installed?

  DMSIceman, welcome to the forum.

  Yes, you can move the HARD disk and install an SSD.  You will need to buy at least a 128 GB SSD.  Here is the data sheet for the computer.

  The best way to install an SSD is to leave the current HARD drive as it came from the factory.  Connect the SSD drive to another SATA port on the motherboard.  Install the software of Migration data provided by the SSD manufacturer on the HARD drive.  Once installed, open it and follow the instructions carefully.  You choose the SSD as a target.  After the data is transferred from the HDD to the SSD, you can disconnect the HARD drive and start the computer.  It should start on the SSD.  Then, you can disconnect the SSD to the first SATA connector and move to another Bay HARD drive and connect it to another SATA port on the motherboard.  You can use it for storage.

  I like the SSD Samsung EVO.  Samsung offers its data Migration software to clone HARD drive.  In addition, they provide their software Wizard to optimize the performance of the SSD.  You can find all the software at the bottom of the page in the link I provided for the EVO.  The Samsung SSD were good about starting in HP computers without changing the BIOS settings.  You will need to buy an adapter to allow the reader to 2.5 "to fit into a 3.5 Bay".

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Can X 1 carbon (2015) use the EVO to 840 Samsung MZ-MTE1T0BW mSATA SSD internal flash drive 1 TB?

  I have a Toshiba Portege in which I installed a Samsung 840 EVO MZ-MTE1T0BW 1 TB mSATA SSD and it worked fine for months. It replaced a similar unbranded 128 GB SSD. On command, I have a Lenovo Thinkpad X 1 of carbon with a 128 GB SSD. Is there a reason I can't recreate the image on the 1 TB of the Toshiba drive and install it in the Lenovo?

  Good day and welcome to the community.

  Congratulations for choosing a carbone3.

  The SSD into the computer is a m.2 2280 format the card. The SSD of MZ-MTE1T0BW, you have is mSATA format, so it will not slot, or if it will fit width/length-wise.

  m.2 2280: connector m2, 22x80mm. Image: http://www.samsung.com/us/system/consumer/product/mz/n5/e5/mzn5e500bw/600x600.jpg

  mSATA: connector mPCIe, 30x51mm. Image: http://www.samsung.com/us/system/consumer/product/mz/mt/e1/mzmte1t0bw/600x600.jpg

  Sorry, but I hope that help to clarify.

  Kind regards.

• zip clip allowing only music, no radio/settings/map

  Hello

  somewhat an unusual question I have, in the hope of getting resolved before sending this back mp3. So I got my sansa clip zip not too long, maybe 4-6 weeks. It worked without problem, really liked the radio option, which is held just enough music, etc., but very recently, he started acting. Let me point out its major problems:

  -at startup, I am automatically taken to the previously played music screen (a title, artist and the progression of the track with album artwork or only background media). There is no option to select 'music' or 'radio '.

  -the back"" button. the button that takes you to the previous screen, works as a button from the previous song (even more strange, if the music is stuck on pause, then I click on 'back' (try, of course, to get on the radio of the screen, or at least let me pick the song!) then it will find a new song and automatically start playing it.)

  I'm stuck in this hell of the music that I can't control ~! Can anyone help? I know it's a very weird problem, not one alone that I found others know after browsing this site... I know that there is HOPE, because once I "format" "ed the drive when it was plugged in to the computer, and after that (removal of all my music), he took me to the home screen where I had access to radio, settings, etc. (and the back button actually took me to the previous screen: 0 ~!)" but after not too long (maybe half a day with the help of twice) when I pressed the power it took me directly on the screen during playback, without opportunity to get out.

  any advice you all have would be wonderful! I really enjoy of this mp3 player outside this huge mess and don't want no return/exchange/get a new one, but on average, I need FM stations and I must be able to choose at least what I listen to the song. I hope someone here can help you! a thousand thanks!

  Let's see if we can cure disorders of this little guy.  I see that you have formatted the device already.

  The best thing to do is the first soft reset the unit in holding the power button for about 30 seconds, then release.  Connect the Zip file on the USB port.

  Download and uncompress or unzip the firmware file from here.  Follow the instructions for installation of caraa , in the thread.

  There is a difference here: don't worry about the part of USB mode, you can install the firmware in MSC or MTP mode.  If you are connected to the PSG. you will see no. letter attributed to the reader device, double-click the device, and then select the internal memory.

  In both cases, drag and drop the clipza.bin file into the root directory of the device, and then disconnect.  The firmware will install automatically on logout.  I feel that the original firmware is damaged on your Zip.

  Let us know how it goes, or post any questions you may have.  I'll be back in a little bit...

  Bob

• retrieve the time backup machine for new ssd internal

  I had to replace my internal HD on a 2012 end iMac, so I went to SSD.

  I had saved my first system and files in Time Machine before that.

  What is the process of a) formatted internal SSD new and b) recovering the original of external backup Time Machine?

  As I have to reseal the iMac just to make it work, I don't want to have to open it again to play with the new SSD!

  Hope that you already have a boot USB OS X in hand disc (I always have a copy must have on hand).

  Plug the USB into the USB port and Time Machine,

  by key pressing 'option' as soon as 'chime' begins.

  You can choose the selection of the boot drive.

  OR

  If your SSD does not start on her file (e.g. blank) - it should start automatically via the USB.

  (a) - Yes, using "disk utility" - in the menu bar superior, to partition the drive (GUID) first

  (b) then choose 'continue' to install the OS X - at the end, you will be asked few options - recover via Time Machine.

  After the restoration, you can run a few updates so that the system will work like the old set up.

  Most of the software should work, but somehow, some software required "activation key" again.

  Those notorious - Rosetta Stone (language). -J' had to communicate with them, uninstall the old drive first.  Microsoft Office can be too fickle.

  Make sure that OS X are the same version (you can't have 10.11 on Time Machine, try using the boot USB 10.10 disk) targeted installed OS X must be the same or more recent than the OS X version of the time Machine.  For example, if your Time machine backup contains 10.10, then you can either use drive start USB 10.10 and 10.11 for the restore process.

  Sam

• the start-up of the firewire drive how to again install ssd internal?

  Hi, I have not used assistant Migration but opted for clean installs the upgrade from 2009 to 2015 MBP.

  I'm good to go except the old is only bootable from disk firewire external, how to take the exact image of what I use (mess on the desktop and documents!) more to the internal ssd that I already deleted and partitioned?

  I want it essentially as it looks and works from the firewire drive, now start and look just as it does internal ssd

  Do I need to initiate a new installation of El Cap first of all on the ssd? or is there a tool/way to copy such existing firewire bootable environment on the internal hard drive?

  Thank you for taking the time to examine this problem.

  Rick

  Although apparently you can start an external drive to snow leopard, it will not work if installed on the internal drive. As it is not backward compatible.  Otherwise I would say cloning the drive on the internal drive. Migration wizard is the only thing I can tell you to use. But be aware that some of the apps for Snow Leopard will not run in the new computer and the operating system. You should see if there are updates for them. Then you need to recreate the desktop again.